VW Tiguan Allspace (BW2) 1.4 TSI E100 Flex Relay, rear window heater (150 hp Petrol/Ethanol CWLA)
- Rated Voltage [V]: 12
- Current Strength [A]: 10
- Relay function: Normally open contact, Starter, Heatable exterior mirror, Heated windscreen, Heated rear window, Brake Booster, Trumpet Horns, Safety Belt Tensioner, Interior Blower, Head space heating, Fuel Pump, Coolant water pump, Emergency off switch, Safety belt warning, Parking Heater, Start-stop system, Wind deflector, Ignition Coil
- Number of pins: 9
- Item number: 115 664
- Our price: 3,99 €
- Manufacturer: TOPRAN
- EAN number: 1154150000010
- Condition: New
Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- for PR number: 1KZ
- Brake Disc Type: Vented
- Drilled: no
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48,5
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Inner Diameter [mm]: 169
- Bore Diameter [mm]: 15,3
- Item number: 25842
- Manufacturer: MAPCO
- EAN number: 4043605445797
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Wear Warning Contact: incl. wear warning contact
- Supplementary Article / Supplementary Info: with spring
- Supplementary Article / Supplementary Info Info 2: with adhesive film
- Thickness [mm]: 20
- Quantity Unit: Axle Set
- Number of wear indicators [per axle]: 1
- Length [mm]: 175,2
- Height [mm]: 69,7
- Warning Contact Length [mm]: 200
- Item number: 1470.01
- Our price: 36,99 €
- Manufacturer: REMSA
- EAN number: 8427975033932
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- for PR number: 1KZ
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48,5
- Centering Diameter [mm]: 65
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Hub Diameter [mm]: 150
- Replace in pairs only
- Item number: 110 418
- Manufacturer: TOPRAN
- EAN number: 6156450000023
- Condition: New
Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 314,0
- for PR number: 1LW, 1LX
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Brake Disc Thickness [mm]: 30,0
- Height [mm]: 49,6
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 27,0
- Inner Diameter [mm]: 145,0
- MAPP code available
- No. of holes 2: 9
- Test Mark: E1 90R-02C0115 / 1172
- Bore Diameter [mm]: 15,3
- Item number: 24.0130-0220.1
- Manufacturer: ATE
- EAN number: 4006633381482
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 340,0
- for PR number: 1LA, 1LB
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Brake Disc Thickness [mm]: 30,0
- Height [mm]: 49,6
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 27,0
- Inner Diameter [mm]: 145,0
- MAPP code available
- No. of holes 2: 9
- Test Mark: E1 90R-02C0115 / 0407
- Bore Diameter [mm]: 15,3
- Item number: 24.0130-0225.1
- Manufacturer: ATE
- EAN number: 4006633383226
- Condition: New
price incl. 19% VAT
- Fitting Position: Front Axle
- Diameter [mm]: 340
- for PR number: 1LA, 1LB
- Brake Disc Type: Vented
- Drilled: no
- Surface: Painted
- Brake Disc Thickness [mm]: 30
- Height [mm]: 49,7
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 27
- Thread Size: 15,3
- Colour: black
- Test Mark: E190R-02C0176 / 0601
- Item number: DF6133S
- Manufacturer: TRW
- EAN number: 3322938097547
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- for PR number: 1KZ
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48,5
- Centering Diameter [mm]: 65
- Hole Arrangement / Number: 5 / 10
- Minimum thickness [mm]: 20
- Item number: BS-8044C
- Manufacturer: OPTIMAL
- EAN number: 4031185488396
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- for PR number: 1KU, 2EM, 2EI
- Brake Disc Type: solid
- Drilled: no
- Surface: Painted
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Brake Disc Thickness [mm]: 12
- Height [mm]: 48,3
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 10
- Colour: black
- Test Mark: E1 90R-02 C0190 / 0640
- Item number: DF6504
- Manufacturer: TRW
- EAN number: 3322938210823
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 310,0
- for PR number: 1KZ, 2ER, 2EV
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Vehicle Equipment: for vehicles with electric parking brake
- Brake Disc Thickness [mm]: 22,0
- Height [mm]: 48,5
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 20,0
- Inner Diameter [mm]: 169,0
- MAPP code available
- No. of holes 2: 9
- Test Mark: E1 90R-02C0118 / 0945
- Bore Diameter [mm]: 15,3
- Item number: 24.0122-0219.1
- Manufacturer: ATE
- EAN number: 4006633229630
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 310
- Brake Disc Type: Vented
- Drilled: no
- Surface: Painted
- Machining: High-carbon
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48,3
- Centering Diameter [mm]: 65
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Thread Size: 15,5
- Colour: black
- Test Mark: E190R-02C0185 / 0588
- Item number: DF4754
- Manufacturer: TRW
- EAN number: 3322937546220
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- for PR number: 1KZ
- Brake Disc Type: Vented
- Drilled: no
- Supplementary Info: Original VAICO Quality
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48,5
- Centering Diameter [mm]: 65
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Weight [kg]: 7,909
- No. of holes 2: 9
- Brake Disc Hub Height [mm]: 46,2
- Packaging width [cm]: 32
- Packaging height [cm]: 10
- Packaging Depth [cm]: 32
- Item number: V10-80084
- Manufacturer: VAICO
- EAN number: 4046001349461
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle
- Diameter [mm]: 314
- for PR number: 1LW, 1LX
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Product line: COAT Z
- Brake Disc Thickness [mm]: 30
- Height [mm]: 50
- Centering Diameter [mm]: 65
- Rim Hole Number: 5
- Hole Arrangement / Number: 10 / 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 27
- Weight [kg]: 9,4
- Test Mark: ECE R90 APPROVED
- Item number: 600.3242.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238750635
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- for PR number: 1LW
- Wear Warning Contact: incl. wear warning contact
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- for brake disc diameter [mm]: 314
- Quantity Unit: Axle Set
- Length [mm]: 175
- Width [mm]: 69
- Thickness 1 [mm]: 20
- Test Mark: ECE R90 Approved
- Weight [kg]: 2,76
- Observe service information
- Item number: 16868
- Our price: 34,99 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816168683
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Brake System: TRW
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 20
- Quantity Unit: Axle Set
- Number of wear indicators [per axle]: 1
- Height [mm]: 69,7
- Width [mm]: 175,2
- WVA Number: 24738, 25217
- Test Mark: R90 Homologated
- Manufacturer Restriction: TRW
- Warning Contact Length [mm]: 260
- Item number: C1W068ABE
- Our price: 57,49 €
- Manufacturer: ABE
- EAN number: 5900427190795
- Condition: New
- Fitting Position: Rear Axle
- Brake System: ATE
- Supplementary Article / Supplementary Info: with accessories, with spring
- Supplementary Article / Supplementary Info Info 2: with adhesive film
- Thickness [mm]: 16,2
- Quantity Unit: Axle Set
- Length [mm]: 123
- Height [mm]: 61,2
- Height 2 [mm]: 56,2
- Item number: 1516.10
- Our price: 22,49 €
- Manufacturer: REMSA
- EAN number: 8427975038241
- Condition: New
- Fitting Position: Front Axle
- Brake System: TRW
- for PR number: 1LA, 1LW
- Thickness [mm]: 20
- Quantity Unit: Axle Set
- Number of wear indicators [per axle]: 1
- Height [mm]: 69,5
- Width [mm]: 175,2
- Warning Contact Length [mm]: 200
- Item number: 05P1734
- Our price: 42,99 €
- Manufacturer: LPR
- EAN number: 8032928106856
- Condition: New
- Fitting Position: Rear Axle
- for PR number: 1KU, 2EM, 2EI, 1KZ, 2ER, 2EV
- Wear Warning Contact: not prepared for wear warning indicator
- Thickness [mm]: 16,2
- Supplementary Info: DTEC COTEC
- Quantity Unit: Axle Set
- Height 1 [mm]: 56,2
- Height 2 [mm]: 61,2
- Width [mm]: 123
- Test Mark: E9 90R-02A0118 / 3530
- Manufacturer Restriction: ATE
- Item number: GDB1957
- Our price: 29,49 €
- Manufacturer: TRW
- EAN number: 3322938162245
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 314
- for PR number: 1LW, 1LX
- Brake Disc Type: Vented
- Drilled: no
- Supplementary Info: Original VAICO Quality
- Brake Disc Thickness [mm]: 30
- Height [mm]: 49,6
- Centering Diameter [mm]: 65
- Rim Hole Number: 9
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 27
- Brake Disc Hub Height [mm]: 19,6
- Packaging width [cm]: 32
- Packaging height [cm]: 10
- Packaging Depth [cm]: 32
- Item number: V10-80116
- Manufacturer: VAICO
- EAN number: 4046001622076
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Brake System: ATE
- for PR number: 1KU, 1KZ
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article / Supplementary Info: without accessories
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Thickness [mm]: 16
- Product line: Prime
- Quantity Unit: Axle Set
- Height 1 [mm]: 56
- Height 2 [mm]: 61
- Width [mm]: 123
- WVA Number: 25009, 25011
- Item number: P 85 124
- Our price: 28,49 €
- Manufacturer: BREMBO
- EAN number: 8020584103975
- Condition: New