Porsche Cayenne 92A 3.0 Diesel Relay, leveling control (239 hp Diesel MCN.RB)

Pressure governor

HAZET Maintenance unit 9070-2 •Dual, consisting of filter-pressure reducer, oil-mist lubricator and manometer

•Air inlet thread 20.67 mm (1⁄2″)

•Air flow at 6.3 bar: 5000 Nl/min

•Capacity of filter-pressure reducer: 50 ml Capacity of oil-mist lubricator: 170 ml

•Connection manometer: 3.2 mm (1/8″)

•Max. pressure: 16 bar (1/2″ and 3/8″) 12 bar (1/4″), Maximum working pressure: 12 bar (1/2″ and 3/8″) 10 bar (1/4″)

•Pressure indication: 0.5 – 12 bar

•Filter grade: 10 µm

•Recommended lubricant: class F (Sprinter ADVP 22)

•Net weight: 1.38 kg

•Temperature range: -10°C – 55°C

1/4" Brass pneumatic 3 way separator, 41mm •for separating condensation

•assembly directly in the access direction

•made out of sitered metal

Application: HAZET Compressed air reducer 9000-080 Reduction of working pressure to protect high-quality pneumatic equipment

•Inline pressure regulator for integration in the compressed air line or direct connection to motorised pneumatic equipment

•Max. inlet pressure: 10 bar

•Outlet pressure 6.3 bar

•Max. air flow: 1300 l/min

•Weight including air connection nipple: 140 g

•Including:

•Adapter from outside thread 12.91 mm (1⁄4″) to outside thread 12.91 mm (1⁄4″) for connecting to the device

•Air connection nipple 7.2 Type 1 for connection to compressed air coupling





•For safe operation on compressed air lines to 10 bar

•Air connection inlet: Inside thread 12.91 mm (1/4″)

•Air connection outlet: Inside thread 12.91 mm (1/4″)

•Net weight: 0.1 kg

HAZET Filter-pressure reducer 9070-5 •Consisting of filter-pressure reducer and manometer

•Air inlet thread 20.67 mm (1⁄2″)

•Air flow at 6.3 bar: 5000 Nl/min

•Connection manometer: 3.2 mm (1/8″)

•Max. pressure: 16 bar (1/2″ and 3/8″) 12 bar (1/4″), Maximum working pressure: 12 bar (1/2″ and 3/8″) 10 bar (1/4″)

•Pressure indication: 0.5 – 12 bar

•Filter grade: 10 µm

•Capacity filter-pressure reducer: 50 ml

•Net weight: 0.89 kg

•Temperature range: -10°C – 55°C

In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.

installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.

measurement, including photos.

For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.

When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.

If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

ISO/IATF zertifizierter Hersteller für Miessler Automotive®

ISO/IATF zertifizierter Hersteller für Miessler Automotive®