W245 F-CELL Relay, leveling control (136 hp Hydrogen FCELL)

Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use.

For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules.

If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at:

Phone: 040 - 25 30 66 55 Email: [email protected]

This often avoids extensive troubleshooting that is disproportionate to normal repair times.

The following applies to complaints: The more complete the processes are submitted, the faster they can be processed.

Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

Pressure governor

HAZET Maintenance unit 9070-2 •Dual, consisting of filter-pressure reducer, oil-mist lubricator and manometer

•Air inlet thread 20.67 mm (1⁄2″)

•Air flow at 6.3 bar: 5000 Nl/min

•Capacity of filter-pressure reducer: 50 ml Capacity of oil-mist lubricator: 170 ml

•Connection manometer: 3.2 mm (1/8″)

•Max. pressure: 16 bar (1/2″ and 3/8″) 12 bar (1/4″), Maximum working pressure: 12 bar (1/2″ and 3/8″) 10 bar (1/4″)

•Pressure indication: 0.5 – 12 bar

•Filter grade: 10 µm

•Recommended lubricant: class F (Sprinter ADVP 22)

•Net weight: 1.38 kg

•Temperature range: -10°C – 55°C

1/4" Brass pneumatic 3 way separator, 41mm •for separating condensation

•assembly directly in the access direction

•made out of sitered metal

Application: HAZET Compressed air reducer 9000-080 Reduction of working pressure to protect high-quality pneumatic equipment

•Inline pressure regulator for integration in the compressed air line or direct connection to motorised pneumatic equipment

•Max. inlet pressure: 10 bar

•Outlet pressure 6.3 bar

•Max. air flow: 1300 l/min

•Weight including air connection nipple: 140 g

•Including:

•Adapter from outside thread 12.91 mm (1⁄4″) to outside thread 12.91 mm (1⁄4″) for connecting to the device

•Air connection nipple 7.2 Type 1 for connection to compressed air coupling





•For safe operation on compressed air lines to 10 bar

•Air connection inlet: Inside thread 12.91 mm (1/4″)

•Air connection outlet: Inside thread 12.91 mm (1/4″)

•Net weight: 0.1 kg

HAZET Filter-pressure reducer 9070-5 •Consisting of filter-pressure reducer and manometer

•Air inlet thread 20.67 mm (1⁄2″)

•Air flow at 6.3 bar: 5000 Nl/min

•Connection manometer: 3.2 mm (1/8″)

•Max. pressure: 16 bar (1/2″ and 3/8″) 12 bar (1/4″), Maximum working pressure: 12 bar (1/2″ and 3/8″) 10 bar (1/4″)

•Pressure indication: 0.5 – 12 bar

•Filter grade: 10 µm

•Capacity filter-pressure reducer: 50 ml

•Net weight: 0.89 kg

•Temperature range: -10°C – 55°C