Vehicle identification number: 7967AAS
Audi A3 8P Sportback RS3 2.5 quattro Pressure tank, fuel supply (340 hp Petrol CEPA)
- Weight [kg]: 0,1
- Item number: 48801
- Our price: 23,49 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816488019
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Supplementary Info: Q+, original equipment manufacturer quality MADE IN GERMANY
- Required quantity: 1
- Material: Plastic
- Weight [kg]: 0,0971
- Packaging width [cm]: 10,7
- Packaging height [cm]: 12
- Packaging Depth [cm]: 14,5
- Item number: V10-2531
- Our price: 27,99 €
- Manufacturer: VAICO
- EAN number: 4046001580413
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Weight [kg]: 0,1
- Item number: 30 94 8801
- Our price: 23,49 €
- Manufacturer: SWAG
- EAN number: 4044688488015
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- Brake Disc Type: Vented
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48,5
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 20
- Test Mark: E1 90R-02C0289 / 1665
- Item number: BG3975
- Manufacturer: DELPHI
- EAN number: 5012759370155
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 340
- Brake Disc Type: Vented
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness [mm]: 30
- Height [mm]: 49,7
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 28
- Test Mark: E1 90R-02C0592 / 1941
- Item number: BG9054
- Manufacturer: DELPHI
- EAN number: 5012759420621
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- Brake System: ATE
- Construction Year from: 04 / 2011
- Brake Disc Type: internally vented
- Drilled: no
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48,4
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 20
- Item number: A1014V
- Manufacturer: LPR
- EAN number: 8032928002936
- Condition: New
price incl. 19% VAT
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- Brake Disc Type: Vented
- Drilled: no
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48,4
- Centering Diameter [mm]: 65
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Item number: BDC5628
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438159059
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Brake System: Lucas / TRW
- Construction Year from: 04 / 2011
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Thickness [mm]: 16,9
- Quantity Unit: Axle Set
- Height [mm]: 56,4
- Width [mm]: 105,2
- Test Mark: E1 90R-02A0498 / 0349
- Vehicle Equipment: for vehicles with electric parking brake
- MAPP code available
- Article number of recommended accessories: 13.0460-0517.2
- Number of bolts / screws: 4
- Item number: 13.0460-2749.2
- Our price: 34,99 €
- Manufacturer: ATE
- EAN number: 4006633330015
- Condition: New
for vehicles with electric handbrake
- Fitting Position: Rear Axle
- Brake System: Lucas / TRW
- Construction Year from: 04 / 2011
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Thickness [mm]: 16,9
- Product line: Ceramic
- Quantity Unit: Axle Set
- Height [mm]: 56,4
- Width [mm]: 105,2
- Test Mark: E1 90R-02A0258 / 0350
- Vehicle Equipment: for vehicles with electric parking brake
- MAPP code available
- Article number of recommended accessories: 13.0460-0517.2
- Number of bolts / screws: 4
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-2749.2
- Our price: 49,49 €
- Manufacturer: ATE
- EAN number: 4006633346382
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones. s, i.e. smooth ones.
- Fitting Position: Rear Axle
- Brake System: Lucas / TRW
- Construction Year from: 04 / 2011
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Thickness [mm]: 17,1
- Product line: Ceramic
- Quantity Unit: Axle Set
- Height [mm]: 55,9
- Width [mm]: 105,3
- Test Mark: E1 90R-02A0258 / 0350
- MAPP code available
- Article number of recommended accessories: 13.0460-0035.2, 13.0460-0259.2
- Number of bolts / screws: 4
- Observe dimensions
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-2880.2
- Our price: 48,49 €
- Manufacturer: ATE
- EAN number: 4006633339544
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones. s, i.e. smooth ones.
- Fitting Position: Rear Axle
- Diameter [mm]: 310,0
- Construction Year from: 04 / 2011
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Brake Disc Thickness [mm]: 22,0
- Height [mm]: 48,5
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 20,0
- Inner Diameter [mm]: 169,0
- MAPP code available
- No. of holes 2: 9
- Test Mark: E1 90R-02C0118 / 0945
- Bore Diameter [mm]: 15,3
- Item number: 24.0122-0219.1
- Manufacturer: ATE
- EAN number: 4006633229630
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Brake System: ATE
- Wear Warning Contact: with integrated wear sensor, with integrated wear warning contact
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Thickness [mm]: 20,3
- Quantity Unit: Axle Set
- Number of wear indicators [per axle]: 1
- Height [mm]: 73
- Height 2 [mm]: 73
- Width [mm]: 155
- Width 2 [mm]: 156
- Thickness 2 [mm]: 20,3
- WVA Number: 23801
- Test Mark: ECE-R90
- Weight [kg]: 2,16
- Warning Contact Length [mm]: 206
- Item number: 598863
- Our price: 40,99 €
- Manufacturer: VALEO
- EAN number: 3276425988637
- Condition: New
1923-2023: 100 years of braking
- Fitting Position: Rear Axle
- Brake System: Lucas-Girling
- for PR number: 1KW
- Material: Low-Metallic
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Thickness [mm]: 17,2
- Quantity Unit: Axle Set
- Height [mm]: 56
- Width [mm]: 105,4
- WVA Number: 23914
- Test Mark: ECE-R90
- Article number of recommended accessories: 1987474312, 1987474685, 1987474470, 1987474314
- Observe technical data
- Item number: 0 986 494 062
- Our price: 24,49 €
- Manufacturer: BOSCH
- EAN number: 4047024044289
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- Construction Year from: 04 / 2011
- Brake Disc Type: Vented
- Drilled: no
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48,5
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Inner Diameter [mm]: 169
- Bore Diameter [mm]: 15,3
- Item number: 25842
- Manufacturer: MAPCO
- EAN number: 4043605445797
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- for PR number: 1KY
- Brake Disc Type: Vented
- Drilled: no
- Vehicle Equipment: for vehicles with electric parking brake
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48,3
- Centering Diameter [mm]: 65
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Thread Size: 15,5
- Item number: C4W014ABE
- Manufacturer: ABE
- EAN number: 5900427206786
- Condition: New
- Fitting Position: Rear Axle
- Brake System: Girling
- Quantity Unit: Axle Set
- Height [mm]: 55,8
- Width [mm]: 105,3
- Test Mark: ECE R-90
- Brake Disc Thickness [mm]: 17,1
- Production Number: 6010090
- Item number: 6010090
- Our price: 22,99 €
- Manufacturer: KRAFT
- EAN number: 5900427194250
- Condition: New
- Fitting Position: Rear Axle
- Brake System: Lucas / TRW
- Construction Year from: 04 / 2011
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Thickness [mm]: 17,1
- Quantity Unit: Axle Set
- Height [mm]: 55,9
- Width [mm]: 105,3
- Test Mark: E1 90R-02A0498 / 0349, E9 90R-02A1163 / 0750
- Vehicle Equipment: for vehicles without electric parking brake
- MAPP code available
- Article number of recommended accessories: 13.0460-0035.2, 13.0460-0259.2
- Number of bolts / screws: 4
- Observe dimensions
- Item number: 13.0460-2880.2
- Our price: 34,99 €
- Manufacturer: ATE
- EAN number: 4006633119153
- Condition: New
for vehicles without electric handbrake
- Fitting Position: Front Axle
- Brake System: Brembo
- for PR number: 1LG
- Construction Year from: 04 / 2011
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Supplementary Article / Supplementary Info Info 2: Left Connector
- Thickness [mm]: 17,1
- Quantity Unit: Axle Set
- Height [mm]: 77,3
- Width [mm]: 131,6
- Test Mark: E9 90R-02A1259 / 1404
- MAPP code available
- Article number of recommended accessories: 24.8190-0013.2, 24.8190-0929.2, 13.0460-0519.2
- Item number: 13.0460-4833.2
- Our price: 75,49 €
- Manufacturer: ATE
- EAN number: 4006633327299
- Condition: New
- Fitting Position: Rear Axle
- Brake System: TRW
- for PR number: 1KW
- Wear Warning Contact: without integrated wear sensor
- Supplementary Article / Supplementary Info Info 2: with bolts / screws, with anti-squeak plate
- for brake disc diameter [mm]: 310
- Thickness [mm]: 17
- Quantity Unit: Axle Set
- Height [mm]: 56,1
- Width [mm]: 105
- WVA Number: 23914
- Test Mark: ECE-R90
- Weight [kg]: 1,224
- Item number: 598752
- Our price: 26,49 €
- Manufacturer: VALEO
- EAN number: 3276425987524
- Condition: New
1923-2023: 100 years of braking
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- for PR number: 1KW
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48,5
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Bore Diameter up to [mm]: 15,3
- fulfils ECE norm: ECE-R90
- Item number: 0 986 479 303
- Manufacturer: BOSCH
- EAN number: 4047024233768
- Condition: New
price incl. 19% VAT
excl. delivery costs