VW Passat B8 3G Saloon 1.5 TSI Parts kit, automatic transmission oil change (150 hp Petrol DPCA)
Recommended part replacement interval for your car for the part category Parts kit, automatic transmission oil change: every 50.000 km / every 24 months
- Quantity Unit: Set
- Supplementary Article / Supplementary Info Info 2: without filter, with oil quantity for standard oil change
- Supplementary Article / Supplementary Info: with oil drain plug
- Transmission Code: 0AM, DQ200
- Transmission Type: 7-Speed Automatic Transmission, 7-Speed Dual-Clutch Transmission
- Capacity [litre]: 1
- Vehicle Equipment: for vehicles with direct shift transmission
- Oil manufacturer recommendation: G 004 000 M2
- Recommended change interval [km]: 100000
- Recommended change interval [years]: 5
- Oil Circuit: Mechatronic Unit
- Item number: V10-5582-SP1
- Our price: 25,99 €
- Manufacturer: VAICO
- EAN number: 4062375301317
- Condition: New
Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
-
- Vehicle Identification Number (VIN) from: 3C-F-200 001
- Transmission Code: DQ381
- Transmission ID: SWV, TDJ, UAX, UBA, UEM, UES, UFS, URW, URY, USA, VCX, VCZ, VDF, VDH
- Alternative Repair Kit: 100 136 0116 / XK, 100 135 0116
- Quantity Unit: Set
- Supplementary Article / Supplementary Info: with accessories, without oil
- Manufacturer Restriction: VW
- Capacity [litre] 0
- Item number: 100 135 0116/SK
- Our price: 43,99 €
- Manufacturer: MEYLE
- EAN number: 4040074363751
- Condition: New
MEYLE oil change kits for automatic transmissions. A full MEYLE-KITS save time and money and make the daily Our MEYLE-KITS are available with various amounts of oil Smarter than OE – this MEYLE-KIT innovates the usual To ensure compliance with professional standards use With a mileage exceeding 60,000 kilometres MEYLE recommends With mounting materials, to fit most models. Please check fit accuracy before installation. maintenance. set of premium-quality components for the professional special tools when refilling transmission fluid and that the transmission fluid and filters be changed along The MEYLE standard kit (100 135 xxxx) contains the necessary workshop life more efficient. amount of oil for the service interval so that an exact oil checking the fluid level. repair of popular gearbox types. with the respective components to maximise gearbox change can be performed. performance and service life. Any vehicle manufacturer's individual specifications must be given priority. The MEYLE extension kit (XK) (100 135 xxxx /XK) contains the total fluid capacity of the relevant transmission and a reserve quantity of transmission oil for performing a complete transmission oil change. The MEYLE short kit (SK) (100 135 xxxx /SK) is supplied without transmission oil and offers the option to determine the amount of transmission oil yourself, for example for flushing the transmission oil.
- Quantity Unit: Set
- Supplementary Article / Supplementary Info Info 2: without filter, with oil quantity for standard oil change
- Supplementary Article / Supplementary Info: with oil drain plug
- Transmission Code: 0AM, DQ200
- Transmission Type: 7-Speed Automatic Transmission, 7-Speed Dual-Clutch Transmission
- Capacity [litre]: 2
- Vehicle Equipment: for vehicles with direct shift transmission
- Oil manufacturer recommendation: G 055 512 A
- Recommended change interval [km]: 100000
- Recommended change interval [years]: 5
- Oil Circuit: Transmission Unit
- Item number: V10-5582-SP2
- Our price: 52,99 €
- Manufacturer: VAICO
- EAN number: 4062375301324
- Condition: New
Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
-
- Vehicle Identification Number (VIN) from: 3C-F-200 001
- Transmission Code: DQ381
- Transmission ID: SWV, TDJ, UAX, UBA, UEM, UES, UFS, URW, URY, USA, VCX, VCZ, VDF, VDH
- Alternative Repair Kit: 100 135 0116 / SK, 100 136 0116 / XK
- Supplementary Article / Supplementary Info Info 2: with oil quantity for standard oil change
- Supplementary Article / Supplementary Info: with accessories
- Transmission Code: 0GC
- Manufacturer Restriction: VW
- Capacity [litre]: 7
- Item number: 100 135 0116
- Our price: 145,49 €
- Manufacturer: MEYLE
- EAN number: 4040074333938
- Condition: New
MEYLE oil change kits for automatic transmissions. A full MEYLE-KITS save time and money and make the daily Our MEYLE-KITS are available with various amounts of oil Smarter than OE – this MEYLE-KIT innovates the usual To ensure compliance with professional standards use With a mileage exceeding 60,000 kilometres MEYLE recommends With mounting materials, to fit most models. Please check fit accuracy before installation. maintenance. set of premium-quality components for the professional special tools when refilling transmission fluid and that the transmission fluid and filters be changed along The MEYLE standard kit (100 135 xxxx) contains the necessary workshop life more efficient. amount of oil for the service interval so that an exact oil checking the fluid level. repair of popular gearbox types. with the respective components to maximise gearbox change can be performed. performance and service life. Any vehicle manufacturer's individual specifications must be given priority. The MEYLE extension kit (XK) (100 135 xxxx /XK) contains the total fluid capacity of the relevant transmission and a reserve quantity of transmission oil for performing a complete transmission oil change. The MEYLE short kit (SK) (100 135 xxxx /SK) is supplied without transmission oil and offers the option to determine the amount of transmission oil yourself, for example for flushing the transmission oil.
price incl. 19% VAT
-
- Vehicle Identification Number (VIN) from: 3C-F-200 001
- Transmission Code: DQ381
- Transmission ID: SWV, TDJ, UAX, UBA, UEM, UES, UFS, URW, URY, USA, VCX, VCZ, VDF, VDH
- Alternative Repair Kit: 100 135 0116 / SK, 100 135 0116
- Supplementary Article / Supplementary Info Info 2: with oil quantity for oil flushing
- Supplementary Article / Supplementary Info: with accessories
- Manufacturer Restriction: VW
- Capacity [litre]: 10
- Item number: 100 135 0116/XK
- Our price: 172,49 €
- Manufacturer: MEYLE
- EAN number: 4040074350522
- Condition: New
MEYLE oil change kits for automatic transmissions. A full MEYLE-KITS save time and money and make the daily Our MEYLE-KITS are available with various amounts of oil Smarter than OE – this MEYLE-KIT innovates the usual To ensure compliance with professional standards use With a mileage exceeding 60,000 kilometres MEYLE recommends With mounting materials, to fit most models. Please check fit accuracy before installation. maintenance. set of premium-quality components for the professional special tools when refilling transmission fluid and that the transmission fluid and filters be changed along The MEYLE standard kit (100 135 xxxx) contains the necessary workshop life more efficient. amount of oil for the service interval so that an exact oil checking the fluid level. repair of popular gearbox types. with the respective components to maximise gearbox change can be performed. performance and service life. Any vehicle manufacturer's individual specifications must be given priority. The MEYLE extension kit (XK) (100 135 xxxx /XK) contains the total fluid capacity of the relevant transmission and a reserve quantity of transmission oil for performing a complete transmission oil change. The MEYLE short kit (SK) (100 135 xxxx /SK) is supplied without transmission oil and offers the option to determine the amount of transmission oil yourself, for example for flushing the transmission oil.
price incl. 19% VAT
- Fitting Position: Front Axle
- Diameter [mm]: 312
- for PR number: 1ZA, 1ZC, 1ZD, 1ZG, 1ZK, 1ZL
- Brake Disc Type: Vented
- Drilled: no
- Machining: High-carbon
- Brake Disc Thickness [mm]: 25
- Height [mm]: 49,9
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Inner Diameter [mm]: 146
- No. of holes 2: 9
- Bore Diameter [mm]: 15,3
- Item number: 25833
- Manufacturer: MAPCO
- EAN number: 4043605415516
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 312
- Brake Disc Type: Vented
- Drilled: no
- Brake Disc Thickness [mm]: 25
- Height [mm]: 50
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Item number: BDC5416
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438069259
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 310,0
- for PR number: 1KZ
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Brake Disc Thickness [mm]: 22,0
- Height [mm]: 48,5
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 20,0
- Inner Diameter [mm]: 169,0
- MAPP code available
- No. of holes 2: 9
- Test Mark: E1 90R-02C0118 / 0945
- Bore Diameter [mm]: 15,3
- Item number: 24.0122-0219.1
- Manufacturer: ATE
- EAN number: 4006633229630
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 312,0
- for PR number: 1ZA, 1ZC, 1ZD, 1ZG, 1ZK, 1ZL
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Brake Disc Thickness [mm]: 25,0
- Height [mm]: 49,9
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 22,0
- Inner Diameter [mm]: 146,0
- MAPP code available
- No. of holes 2: 9
- Test Mark: E1 90R-02C0115 / 1001
- Bore Diameter [mm]: 15,3
- Item number: 24.0125-0158.1
- Manufacturer: ATE
- EAN number: 4006633209489
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 312,0
- for PR number: 1ZA, 1ZC, 1ZD, 1ZG, 1ZK, 1ZL
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Product line: PowerDisc
- Brake Disc Thickness [mm]: 25,0
- Height [mm]: 49,9
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 22,0
- Inner Diameter [mm]: 146,0
- MAPP code available
- No. of holes 2: 9
- Test Mark: E1 90R-02C0858 / 1214
- Bore Diameter [mm]: 15,3
- Item number: 24.0325-0158.1
- Manufacturer: ATE
- EAN number: 4006633312677
- Condition: New
For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 312
- for PR number: 1ZA, 1ZD, 1ZK, 1ZL
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- for brake disc diameter [mm]: 312
- Brake Disc Thickness [mm]: 25,0
- Height [mm]: 49,9
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Inner Diameter [mm]: 146
- No. of holes 2: 9
- Bore Diameter [mm]: 15,3
- Item number: C3W039ABE
- Manufacturer: ABE
- EAN number: 5901655214055
- Condition: New
price incl. 19% VAT
- Fitting Position: Front Axle
- Diameter [mm]: 312
- for PR number: 1ZA, 1ZD, 1ZK, 1ZL
- Brake Disc Type: Vented
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness [mm]: 25
- Height [mm]: 49,9
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 22
- Test Mark: E1 90R-02C0277 / 1198
- Item number: BG3953
- Manufacturer: DELPHI
- EAN number: 5012759360545
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 312
- for PR number: 1ZA, 1ZD, 1ZK, 1ZL
- Drilled: no
- Brake Disc Thickness [mm]: 25
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 22
- for article number: A1004V
- Item number: A1004V
- Manufacturer: LPR
- EAN number: 8032532102671
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 312
- for PR number: 1ZA, 1ZD, 1ZK, 1ZL
- Brake Disc Type: Vented
- Drilled: no
- Supplementary Info: ORIGINAL Quality
- Brake Disc Thickness [mm]: 25
- Height [mm]: 49,9
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Required quantity: 2
- Item number: 115 521 1094
- Manufacturer: MEYLE
- EAN number: 4040074429006
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 312
- for PR number: 1ZA, 1ZC, 1ZD, 1ZG, 1ZK, 1ZL
- Construction Year to: 07 / 2019
- Construction Year from: 01 / 2019
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- TecDoc Engine Number: DADA
- Brake Disc Thickness [mm]: 25
- Height [mm]: 49,7
- Centering Diameter [mm]: 65
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 15,4
- Item number: 0 986 479 058
- Manufacturer: BOSCH
- EAN number: 4047026223934
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- for PR number: 1KZ
- Construction Year to: 07 / 2019
- Construction Year from: 01 / 2019
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- TecDoc Engine Number: DADA
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48,5
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Bore Diameter up to [mm]: 15,3
- fulfils ECE norm: ECE-R90
- Item number: 0 986 479 303
- Manufacturer: BOSCH
- EAN number: 4047024233768
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Paired product: FDB4433
- Diameter [mm]: 312
- for PR number: 1ZA, 1ZC, 1ZD, 1ZG, 1ZK, 1ZL
- Brake Disc Type: Vented
- Drilled: no
- Surface: Oiled
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Product line: PREMIER
- Brake Disc Thickness [mm]: 25
- Height [mm]: 50
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 23
- Weight [kg]: 8,94
- Tightening Torque [Nm]: 120
- Test Mark: R90 homologated
- Packing Type: Box
- Packaging length [cm]: 31,3
- Packaging width [cm]: 31,3
- Packaging height [cm]: 10,4
- Item number: DDF1305
- Manufacturer: FERODO
- EAN number: 4044197335183
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 312
- for PR number: 1ZD, 1ZL, 1ZK, 1ZA
- Brake Disc Type: internally vented
- Drilled: no
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Product line: Prime
- Brake Disc Thickness [mm]: 25
- Height [mm]: 50
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 22
- Tightening Torque [Nm]: 120
- Item number: 09.9772.10
- Manufacturer: BREMBO
- EAN number: 8020584977217
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 312
- for PR number: 1ZD, 1ZL, 1ZK, 1ZA
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Product line: Prime
- Brake Disc Thickness [mm]: 25
- Height [mm]: 50
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 22
- Tightening Torque [Nm]: 120
- Item number: 09.9772.11
- Manufacturer: BREMBO
- EAN number: 8020584018286
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 312
- for PR number: 1ZA, 1ZD, 1ZK, 1ZL, 1ZC, 1ZG, 1ZM, 1ZN
- Vehicle Identification Number (VIN) from: A3-JC000 001, 3C-J-000 001
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Product line: COAT Z
- Brake Disc Thickness [mm]: 25
- Height [mm]: 50
- Centering Diameter [mm]: 65
- Rim Hole Number: 5
- Hole Arrangement / Number: 10 / 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Weight [kg]: 8,3
- Test Mark: ECE R90 APPROVED
- Item number: 100.3300.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238718185
- Condition: New
price incl. 19% VAT
excl. delivery costs