VW EOS 1f7 2.0 FSI Parts kit, automatic transmission oil change (150 hp Petrol BVY)
Recommended part replacement interval for your car for the part category Parts kit, automatic transmission oil change: every 50.000 km / every 24 months
- Supplementary Article / Supplementary Info: with accessories
- Transmission Code: 02E, 0D9, DQ 250
- Transmission Type: 6-Speed Automatic Transmission
- Vehicle Equipment: for vehicles with direct shift transmission
- Item number: 73964Set
- Our price: 10,36 €
- Manufacturer: AIC
- EAN number: 4046283739646
- Condition: New
Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use.
For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules.
If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at:
Phone: 040 - 25 30 66 55 Email: [email protected]
This often avoids extensive troubleshooting that is disproportionate to normal repair times.
The following applies to complaints: The more complete the processes are submitted, the faster they can be processed.
Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Supplementary Article / Supplementary Info Info 2: with oil quantity for standard oil change, with seal ring
- Transmission Code: 0D9, DQ250, 02E
- Transmission Type: 6-Speed Automatic Transmission, Dual-Clutch Transmission
- Capacity [litre]: 6
- Recommended change interval [km]: 60000
- Recommended change interval [years]: 5
- Item number: 58376Set
- Our price: 84,57 €
- Manufacturer: AIC
- EAN number: 4046283583768
- Condition: New
Not allowed to mix with other gear oils. Our products are usually delivered without installation The recommended replacement intervals of the vehicle instructions. Installation may only be carried out by manufacturer must be observed. trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use.
For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules.
If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at:
Phone: 040 - 25 30 66 55 Email: [email protected]
This often avoids extensive troubleshooting that is disproportionate to normal repair times.
The following applies to complaints: The more complete the processes are submitted, the faster they can be processed.
Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Supplementary Article / Supplementary Info Info 2: with seal ring, with oil quantity for oil flushing
- Transmission Code: 0D9, 02E, DQ250
- Transmission Type: Dual-Clutch Transmission, for 6-speed automatic transmission
- Capacity [litre]: 8
- Vehicle Equipment: for vehicles with direct shift transmission
- Recommended change interval [km]: 60000
- Recommended change interval [years]: 5
- Item number: 70316Set
- Our price: 121,14 €
- Manufacturer: AIC
- EAN number: 4046283703166
- Condition: New
Not allowed to mix with other gear oils. Our products are usually delivered without installation The recommended replacement intervals of the vehicle instructions. Installation may only be carried out by manufacturer must be observed. trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use.
For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules.
If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at:
Phone: 040 - 25 30 66 55 Email: [email protected]
This often avoids extensive troubleshooting that is disproportionate to normal repair times.
The following applies to complaints: The more complete the processes are submitted, the faster they can be processed.
Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
price incl. 19% VAT
-
- for PR number: 1ZD
-
- Fitting Position: Front Axle
- for PR number: 1LJ
- Diameter [mm]: 312
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Height [mm]: 49,9
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Inner Diameter [mm]: 146
- Machining: High-carbon
- No. of holes 2: 9
- Bore Diameter [mm]: 15,3
- Drilled: no
- Item number: 25833
- Manufacturer: MAPCO
- EAN number: 4043605415516
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 05 / 2006
- for PR number: 2EA
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48,5
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Inner Diameter [mm]: 169
- Bore Diameter [mm]: 15,3
- Drilled: no
- Item number: 25842
- Manufacturer: MAPCO
- EAN number: 4043605445797
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- for PR number: 1ZJ, 1ZD
- Diameter [mm]: 312
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Height [mm]: 49,9
- Surface: Oiled
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 22
- Test Mark: E1 90R-02C0277 / 1198
- Drilled: no
- Item number: BG3953
- Manufacturer: DELPHI
- EAN number: 5012759360545
- Condition: New
-
- Fitting Position: Front Axle
- for PR number: 1LK
- Diameter [mm]: 345
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 30
- Height [mm]: 50
- Surface: Oiled
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 27
- Test Mark: E1 90R-02C0074 / 1612
- Drilled: no
- Item number: BG9952
- Manufacturer: DELPHI
- EAN number: 5012759360736
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 05 / 2006
- Fitting Position: Rear Axle
- for PR number: 1KD
- Brake System: TRW
- Brake Disc Thickness [mm]: 10
- Height [mm]: 51,3
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Drilled: no
- Item number: A1003P
- Manufacturer: LPR
- EAN number: 8032532092286
- Condition: New
-
- Construction Year from: 05 / 2006
- Fitting Position: Front Axle
- for PR number: 1LJ, 1ZD
- Diameter [mm]: 312
- Brake Disc Thickness [mm]: 25
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 22
- for article number: A1004V
- Drilled: no
- Item number: A1004V
- Manufacturer: LPR
- EAN number: 8032532102671
- Condition: New
-
- Construction Year from: 05 / 2006
- Fitting Position: Rear Axle
- for PR number: 1KJ, 1KZ
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Height [mm]: 48,2
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 10
- Drilled: no
- Item number: A1005P
- Manufacturer: LPR
- EAN number: 8032532080108
- Condition: New
-
- Construction Year from: 05 / 2006
- Fitting Position: Rear Axle
- for PR number: 2EA
- Diameter [mm]: 310
- Brake Disc Type: internally vented
- Brake System: ATE
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48,4
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 20
- Drilled: no
- Item number: A1014V
- Manufacturer: LPR
- EAN number: 8032928002936
- Condition: New
price incl. 19% VAT
- Fitting Position: Rear Axle
- Diameter [mm]: 255
- Brake Disc Type: solid
- Construction Year from: 05 / 2006
- Brake Disc Thickness [mm]: 10
- Height [mm]: 51,6
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 8
- Inner Diameter [mm]: 65
- Bore Diameter [mm]: 15,3
- Drilled: no
- Item number: 25831
- Manufacturer: MAPCO
- EAN number: 4043605404640
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 282
- Brake Disc Type: solid
- Construction Year from: 05 / 2006
- Brake Disc Thickness [mm]: 12
- Height [mm]: 48,6
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 10
- Inner Diameter [mm]: 159
- No. of holes 2: 9
- Bore Diameter [mm]: 15,3
- Drilled: no
- Item number: 25841
- Manufacturer: MAPCO
- EAN number: 4043605441874
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 345
- Brake Disc Type: Vented
- for PR number: 1LK
- Brake Disc Thickness [mm]: 30
- Height [mm]: 49,9
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 27
- Thread Size: 15,5
- Drilled: no
- Item number: C3A029ABE
- Manufacturer: ABE
- EAN number: 5900427198661
- Condition: New
price incl. 19% VAT
- Fitting Position: Front Axle
- Diameter [mm]: 312
- Brake Disc Type: Vented
- for PR number: 1ZJ, 1ZD
- Brake Disc Thickness [mm]: 25,0
- Height [mm]: 49,9
- Surface: Coated
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Inner Diameter [mm]: 146
- Machining: High-carbon
- No. of holes 2: 9
- Bore Diameter [mm]: 15,3
- Drilled: no
- Item number: C3W039ABE
- Manufacturer: ABE
- EAN number: 5901655214055
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 255
- Brake Disc Type: solid
- for PR number: 1KD
- Brake Disc Thickness [mm]: 10
- Height [mm]: 51,3
- Centering Diameter [mm]: 65
- Number of Holes: 9
- Rim Hole Number: 9
- Thickness [mm]: 10
- Minimum thickness [mm]: 7
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: C4W012ABE
- Manufacturer: ABE
- EAN number: 5900427206762
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- Brake Disc Type: Vented
- for PR number: 2EA
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48,3
- Centering Diameter [mm]: 65
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Thread Size: 15,5
- Drilled: no
- Item number: C4W014ABE
- Manufacturer: ABE
- EAN number: 5900427206786
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 282
- Brake Disc Type: Vented
- Construction Year from: 05 / 2006
- Brake Disc Thickness [mm]: 12,0
- Height [mm]: 48,6
- Surface: Coated
- Centering Diameter [mm]: 65
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 10
- Inner Diameter [mm]: 159
- Bore Diameter [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- fulfils ECE norm: ECE-R90
- Drilled: no
- Item number: C4W015ABE
- Manufacturer: ABE
- EAN number: 5900427206793
- Condition: New
-
- Construction Year from: 05 / 2006
- Fitting Position: Front Axle
- for PR number: 1ZE
- Diameter [mm]: 288
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 25
- Height [mm]: 49,5
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 22
- Drilled: no
- Item number: A1002V
- Manufacturer: LPR
- EAN number: 8032532092255
- Condition: New
-
- Construction Year from: 05 / 2006
- Fitting Position: Front Axle
- for PR number: 1LK
- Diameter [mm]: 345
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 30
- Height [mm]: 49,9
- Centering Diameter [mm]: 65
- Minimum thickness [mm]: 27
- Drilled: no
- Item number: A1024V
- Manufacturer: LPR
- EAN number: 8032928039024
- Condition: New
price incl. 19% VAT