• SHOP
  • CLUB
0
My Garage
Add vehicle
0
items #
0,00 €
Your basket is empty

Porsche 911 996 Coupe 3.6 Carrera 4 Parts kit, automatic transmission oil change (320 hp Petrol M 96.03)

Gearbox service kit Porsche 911 996 Coupe 3.6 Carrera 4 320 Petrol Engine

Recommended part replacement interval for your car for the part category Parts kit, automatic transmission oil change: every 50.000 km / every 24 months

Manufacturers
Filter
5 items
  • Quantity Unit: Set
  • Supplementary Article / Supplementary Info Info 2: with seal ring
  • Model Year from: 2002
  • See accessories list for additionally required parts
  • Supplementary Article / Supplementary Info: without oil, with gasket / seal
  • Transmission Code: A96,10, A96,35, A96,50, A97,01, A97,31, A97,50
  • Transmission Type: 5-Speed Automatic Transmission
  • Vehicle Equipment: for vehicles with Tiptronic
  • Supplementary Info: EXPERT KITS +
  • Recommended change interval [years]: 5
  • Recommended change interval [km]: 60000
  • Item number: V45-0138-BEK
  • Our price: 49,49 €
  • Manufacturer: VAICO
  • EAN number: 4046001849091
  • Condition: New
Show OEM numbers of the product
Contents of the Gearbox service kit VAICO set:
Description of the product
Units
Article number
Additional information

In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.

installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.

measurement, including photos.

For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.

When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.

If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Information on the disposal of used oil
Details
In stock
-73%
compared to RRP 187,98 €

49,49 €

price incl. 19% VAT

excl. delivery costs

MEYLE 414 135 0001/SK Gearbox service kit without oil
Article number: 414 135 0001/SK
Submit a review
  • Alternative Repair Kit: 414 135 0001, 414 135 0001 / XK
  • Transmission ID: A9635
  • Consult accessories list for recommended additional repairs
  • Supplementary Article / Supplementary Info: without oil
  • Transmission Code: A97.31, A97.01, A96.50, A96.35, A96.10, A97.50
  • Transmission Type: 5-Speed Automatic Transmission
  • Item number: 414 135 0001/SK
  • Our price: 66,99 €
  • Manufacturer: MEYLE
  • EAN number: 4040074323120
  • Condition: New
Show OEM numbers of the product
Contents of the Gearbox service kit MEYLE set:
Description of the product
Units
Article number
Additional information

MEYLE oil change kits for automatic transmissions. A full MEYLE-KITS save time and money and make the daily Our MEYLE-KITS are available with various amounts of oil Smarter than OE – this MEYLE-KIT innovates the usual To ensure compliance with professional standards use With a mileage exceeding 60,000 kilometres MEYLE recommends With mounting materials, to fit most models. Please check fit accuracy before installation. maintenance. set of premium-quality components for the professional special tools when refilling transmission fluid and that the transmission fluid and filters be changed along The MEYLE standard kit (100 135 xxxx) contains the necessary workshop life more efficient. amount of oil for the service interval so that an exact oil checking the fluid level. repair of popular gearbox types. with the respective components to maximise gearbox change can be performed. performance and service life. Any vehicle manufacturer's individual specifications must be given priority. The MEYLE extension kit (XK) (100 135 xxxx /XK) contains the total fluid capacity of the relevant transmission and a reserve quantity of transmission oil for performing a complete transmission oil change. The MEYLE short kit (SK) (100 135 xxxx /SK) is supplied without transmission oil and offers the option to determine the amount of transmission oil yourself, for example for flushing the transmission oil.

Information on the disposal of used oil
Details
In stock
-53%
compared to RRP 144,45 €

66,99 €

price incl. 19% VAT

excl. delivery costs

  • Alternative Repair Kit: 414 135 0001 / XK, 414 135 0001 / SK
  • Supplementary Article / Supplementary Info Info 2: with oil quantity for standard oil change
  • Transmission ID: A9635
  • Supplementary Article / Supplementary Info: with accessories
  • Transmission Code: A97.01, A96.50, A96.35, A96.10, A97.50, A97.31
  • Transmission Type: 5-Speed Automatic Transmission
  • Capacity [litre]: 5
  • Supplementary Info: ORIGINAL Quality
  • Item number: 414 135 0001
  • Our price: 110,99 €
  • Manufacturer: MEYLE
  • EAN number: 4040074209783
  • Condition: New
Show OEM numbers of the product
Contents of the Gearbox service kit MEYLE set:
Description of the product
Units
Article number
Additional information

MEYLE oil change kits for automatic transmissions. A full MEYLE-KITS save time and money and make the daily Our MEYLE-KITS are available with various amounts of oil Smarter than OE – this MEYLE-KIT innovates the usual To ensure compliance with professional standards use With a mileage exceeding 60,000 kilometres MEYLE recommends With mounting materials, to fit most models. Please check fit accuracy before installation. maintenance. set of premium-quality components for the professional special tools when refilling transmission fluid and that the transmission fluid and filters be changed along The MEYLE standard kit (100 135 xxxx) contains the necessary workshop life more efficient. amount of oil for the service interval so that an exact oil checking the fluid level. repair of popular gearbox types. with the respective components to maximise gearbox change can be performed. performance and service life. Any vehicle manufacturer's individual specifications must be given priority. The MEYLE extension kit (XK) (100 135 xxxx /XK) contains the total fluid capacity of the relevant transmission and a reserve quantity of transmission oil for performing a complete transmission oil change. The MEYLE short kit (SK) (100 135 xxxx /SK) is supplied without transmission oil and offers the option to determine the amount of transmission oil yourself, for example for flushing the transmission oil.

Information on the disposal of used oil
Details
Free delivery on this item
In stock
-48%
compared to RRP 215,25 €

110,99 €

price incl. 19% VAT

free delivery

Please note!
  • Quantity Unit: Set
  • Supplementary Article / Supplementary Info Info 2: with oil quantity for standard oil change, with seal ring
  • Model Year from: 2002
  • See accessories list for additionally required parts
  • Supplementary Article / Supplementary Info: with gasket / seal
  • Transmission Code: A96,35, A96,10, A97,31, A97,01, A96,50, A97,50
  • Transmission Type: 5-Speed Automatic Transmission
  • Weight [kg]: 6,02
  • Capacity [litre]: 5
  • Vehicle Equipment: for vehicles with Tiptronic
  • Supplementary Info: EXPERT KITS +
  • Manufacturer Approval (licensed): 236.14
  • Recommended change interval [km]: 60000
  • Recommended change interval [years]: 5
  • Packaging height [cm]: 28,1
  • Packaging Depth [cm]: 32
  • Item number: V45-0138
  • Our price: 144,99 €
  • Manufacturer: VAICO
  • EAN number: 4046001849350
  • Condition: New
Show OEM numbers of the product
Contents of the Gearbox service kit VAICO set:
Description of the product
Units
Article number
Additional information

In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.

installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.

measurement, including photos.

For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.

When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.

If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Information on the disposal of used oil
Details
Free delivery on this item
In stock
-64%
compared to RRP 409,03 €

144,99 €

price incl. 19% VAT

free delivery

  • Quantity Unit: Set
  • Supplementary Article / Supplementary Info Info 2: with oil quantity for standard oil change
  • Supplementary Article / Supplementary Info: with accessories, Oil Change by draining
  • Transmission Code: 722.6
  • Transmission Type: 5-Speed Automatic Transmission
  • Manufacturer Restriction: PORSCHE
  • Capacity [litre]: 7
  • Recommended change interval [km]: 60000
  • Item number: 105.108.0005
  • Our price: 320,50 €
  • Manufacturer: TCMATIC
  • EAN number: 8445059010426
  • Condition: New
Show OEM numbers of the product
Information on the disposal of used oil
Details
Get a bonus of 1,95 € when you purchase this product
You will receive 1,95 € in your bonus account if you buy this product:
  • Accumulate your bonuses through purchasing items marked “BONUS";
  • Pay for up to 10% of your order with the accumulated bonuses;
More
Free delivery on this item
In stock (Item(s) left: 2)
320,50 €

price incl. 19% VAT

free delivery

PORSCHE 911 (996) 3.6 Carrera 4 Bestsellers
  • Fitting Position: Front Axle
  • Diameter [mm]: 305
  • Brake Disc Type: Vented
  • Drilled: no
  • Surface: Oiled
  • Supplementary Article / Supplementary Info Info 2: with bolts / screws
  • Product line: PREMIER
  • Brake Disc Thickness [mm]: 28
  • Height [mm]: 28
  • Centering Diameter [mm]: 66
  • Number of Holes: 4
  • Bolt Hole Circle Ø [mm]: 108
  • Minimum thickness [mm]: 26
  • Weight [kg]: 16,1
  • Tightening Torque [Nm]: 90
  • Test Mark: R90 homologated
  • Packing Type: Box
  • Packaging length [cm]: 31
  • Packaging width [cm]: 31
  • Packaging height [cm]: 7
  • Item number: DDF1065
  • Manufacturer: FERODO
  • EAN number: 5016687213294
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
-70%
compared to RRP 171,40 €

50,49 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Rear Axle
  • Brake System: Brembo
  • Construction Year from: 01 / 2002
  • Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
  • Braking System: for vehicles without ceramic brakes
  • Thickness [mm]: 17
  • Quantity Unit: Axle Set
  • Height [mm]: 90,3
  • Width [mm]: 121,3
  • Test Mark: E1 90R-01937 / 898
  • MAPP code available
  • Article number of recommended accessories: 24.8190-0921.2, 24.8190-0931.2, 24.8190-0934.2
  • Observe dimensions
  • Item number: 13.0460-4987.2
  • Our price: 72,49 €
  • Manufacturer: ATE
  • EAN number: 4006633096300
  • Condition: New
Show OEM numbers of the product
Details
In stock (Item(s) left: 2)
-57%
compared to RRP 169,10 €

72,49 €

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Rear Axle
  • Brake System: Brembo
  • Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
  • Thickness [mm]: 15,5
  • Quantity Unit: Axle Set
  • Height [mm]: 73,0
  • Width [mm]: 112,2
  • Test Mark: E1 90R-01891 / 900
  • MAPP code available
  • Article number of recommended accessories: 24.8190-0921.2, 24.8190-0922.2
  • Observe dimensions
  • Item number: 13.0460-4988.2
  • Our price: 55,49 €
  • Manufacturer: ATE
  • EAN number: 4006633096539
  • Condition: New
Show OEM numbers of the product
Details
In stock
-62%
compared to RRP 148,04 €

55,49 €

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Front Axle Left
  • Paired product: 24.0128-0130.1
  • Diameter [mm]: 318,0
  • Brake Disc Type: perforated / vented
  • Drilled: yes
  • Surface: Coated
  • Machining: Alloyed / High-carbon
  • Brake Disc Thickness [mm]: 28,0
  • Height [mm]: 67
  • Centering Diameter [mm]: 98,0
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 130,0
  • Minimum thickness [mm]: 26,0
  • Inner Diameter [mm]: 158,8
  • MAPP code available
  • Test Mark: E1 90R-02C0640 / 1128
  • Bore Diameter [mm]: 15,4
  • Item number: 24.0128-0131.1
  • Manufacturer: ATE
  • EAN number: 4006633100045
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
-55%
compared to RRP 277,39 €

124,99 €
Price per item

price incl. 19% VAT

free delivery

  • Fitting Position: Rear Axle Right
  • Paired product: 24.0128-0197.1
  • Diameter [mm]: 330,0
  • Construction Year from: 01 / 2002
  • Brake Disc Type: perforated / vented
  • Drilled: yes
  • Surface: Coated
  • Machining: Alloyed / High-carbon
  • Braking System: for vehicles without ceramic brakes
  • Brake Disc Thickness [mm]: 28,0
  • Height [mm]: 75,0
  • Centering Diameter [mm]: 98,0
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 130,0
  • Minimum thickness [mm]: 26,0
  • Inner Diameter [mm]: 180,0
  • MAPP code available
  • Test Mark: E1 90R-02C0640 / 1203
  • Bore Diameter [mm]: 15,4
  • Item number: 24.0128-0196.1
  • Manufacturer: ATE
  • EAN number: 4006633302074
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
-54%
compared to RRP 277,63 €

125,49 €
Price per item

price incl. 19% VAT

free delivery

  • Fitting Position: Rear Axle Left
  • Paired product: 24.0128-0196.1
  • Diameter [mm]: 330,0
  • Construction Year from: 01 / 2002
  • Brake Disc Type: perforated / vented
  • Drilled: yes
  • Surface: Coated
  • Machining: Alloyed / High-carbon
  • Braking System: for vehicles without ceramic brakes
  • Brake Disc Thickness [mm]: 28,0
  • Height [mm]: 75,0
  • Centering Diameter [mm]: 98,0
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 130,0
  • Minimum thickness [mm]: 26,0
  • Inner Diameter [mm]: 180,0
  • MAPP code available
  • Test Mark: E1 90R-02C0640 / 1203
  • Bore Diameter [mm]: 15,4
  • Item number: 24.0128-0197.1
  • Manufacturer: ATE
  • EAN number: 4006633302135
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
-54%
compared to RRP 277,63 €

125,49 €
Price per item

price incl. 19% VAT

free delivery

  • Fitting Position: Front Axle Right
  • Paired product: 24.0134-0101.1
  • Diameter [mm]: 330,0
  • Construction Year from: 01 / 2002
  • Brake Disc Type: perforated / vented
  • Drilled: yes
  • Surface: Coated
  • Machining: Alloyed / High-carbon
  • Braking System: for vehicles without ceramic brakes
  • Brake Disc Thickness [mm]: 34,0
  • Height [mm]: 69,5
  • Centering Diameter [mm]: 98,0
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 130,0
  • Minimum thickness [mm]: 32,0
  • Inner Diameter [mm]: 173,5
  • MAPP code available
  • Bore Diameter [mm]: 15,4
  • Item number: 24.0134-0102.1
  • Manufacturer: ATE
  • EAN number: 4006633301879
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock (Item(s) left: 4)
-60%
compared to RRP 303,33 €

118,99 €
Price per item

price incl. 19% VAT

free delivery

BOSCH 0 986 494 265 Brake pad set Rear Axle, Low-Metallic
Article number: 0 986 494 265
Submit a review
  • Fitting Position: Rear Axle
  • Material: Low-Metallic
  • Supplementary Article / Supplementary Info Info 2: with anti-squeak plate, with mounting manual
  • Thickness [mm]: 16
  • Quantity Unit: Axle Set
  • Height [mm]: 73
  • Width [mm]: 112,2
  • WVA Number: 21792
  • Test Mark: ECE-R90
  • Article number of recommended accessories: 1987473029, 1987474593, 1987474592, 1987474557
  • Observe technical data
  • Item number: 0 986 494 265
  • Our price: 49,49 €
  • Manufacturer: BOSCH
  • EAN number: 3165143660225
  • Condition: New
Show OEM numbers of the product
Details
In stock
-69%
compared to RRP 159,46 €

49,49 €

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Rear Axle
  • Brake System: BREMBO
  • Wear Warning Contact: excl. wear warning contact, prepared for wear warning indicator
  • Thickness [mm]: 15,5
  • Supplementary Info: Q+, original equipment manufacturer quality
  • Quantity Unit: Axle Set
  • Height [mm]: 73
  • Width [mm]: 112,0
  • Weight [kg]: 1,38
  • Packaging width [cm]: 9
  • Packaging height [cm]: 9
  • Packaging Depth [cm]: 12,7
  • Item number: V45-0024
  • Our price: 56,99 €
  • Manufacturer: VAICO
  • EAN number: 4046001470998
  • Condition: New
Show OEM numbers of the product
Additional information

In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.

installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.

measurement, including photos.

For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.

When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.

If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Details
In stock (Item(s) left: 4)
-71%
compared to RRP 197,33 €

56,99 €

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Rear Axle
  • Diameter [mm]: 299
  • Brake Disc Type: perforated / vented
  • Drilled: yes
  • Supplementary Info: Original VAICO Quality
  • Brake Disc Thickness [mm]: 24
  • Height [mm]: 75
  • Centering Diameter [mm]: 98
  • Rim Hole Number: 5
  • Bolt Hole Circle Ø [mm]: 130
  • Minimum thickness [mm]: 22
  • Brake Disc Hub Height [mm]: 51
  • Packaging width [cm]: 30
  • Packaging height [cm]: 15
  • Packaging Depth [cm]: 30
  • Item number: V45-80002
  • Manufacturer: VAICO
  • EAN number: 4046001552151
  • Condition: New
Show OEM numbers of the product
Additional information

In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.

installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.

measurement, including photos.

For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.

When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.

If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Details
Free delivery on this item
In stock
-69%
compared to RRP 227,29 €

69,99 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Front Axle
  • Brake System: Brembo
  • Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
  • Braking System: for vehicles without ceramic brakes
  • Thickness [mm]: 17
  • Quantity Unit: Axle Set
  • Height [mm]: 88,5
  • Width [mm]: 140,0
  • Test Mark: E1 90R-01937 / 793
  • MAPP code available
  • Article number of recommended accessories: 24.8190-0921.2, 24.8190-0931.2, 24.8190-0933.2, 24.8190-0950.2
  • Observe dimensions
  • Item number: 13.0460-4999.2
  • Our price: 82,49 €
  • Manufacturer: ATE
  • EAN number: 4006633219242
  • Condition: New
Show OEM numbers of the product
Details
In stock (Item(s) left: 3)
82,49 €

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Rear Axle
  • Diameter [mm]: 299,0
  • Brake Disc Type: perforated / vented
  • Drilled: yes
  • Surface: Coated
  • Machining: Alloyed / High-carbon
  • Brake Disc Thickness [mm]: 24,0
  • Height [mm]: 75,0
  • Centering Diameter [mm]: 98,0
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 130,0
  • Minimum thickness [mm]: 22,0
  • Inner Diameter [mm]: 180,0
  • MAPP code available
  • Test Mark: E1 90R-02C0686 / 1343
  • Bore Diameter [mm]: 15,4
  • Item number: 24.0124-0176.1
  • Manufacturer: ATE
  • EAN number: 4006633119078
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
-54%
compared to RRP 225,50 €

102,49 €
Price per item

price incl. 19% VAT

free delivery

  • Fitting Position: Front Axle Right
  • Paired product: 24.0128-0131.1
  • Diameter [mm]: 318,0
  • Brake Disc Type: perforated / vented
  • Drilled: yes
  • Surface: Coated
  • Machining: Alloyed / High-carbon
  • Brake Disc Thickness [mm]: 28,0
  • Height [mm]: 67
  • Centering Diameter [mm]: 98,0
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 130,0
  • Minimum thickness [mm]: 26,0
  • Inner Diameter [mm]: 158,8
  • MAPP code available
  • Test Mark: E1 90R-02C0640 / 1128
  • Bore Diameter [mm]: 15,4
  • Item number: 24.0128-0130.1
  • Manufacturer: ATE
  • EAN number: 4006633100021
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock (Item(s) left: 6)
-55%
compared to RRP 277,39 €

124,99 €
Price per item

price incl. 19% VAT

free delivery

  • Fitting Position: Front Axle Left
  • Paired product: 24.0134-0102.1
  • Diameter [mm]: 330,0
  • Construction Year from: 01 / 2002
  • Brake Disc Type: perforated / vented
  • Drilled: yes
  • Surface: Coated
  • Machining: Alloyed / High-carbon
  • Braking System: for vehicles without ceramic brakes
  • Brake Disc Thickness [mm]: 34,0
  • Height [mm]: 69,5
  • Centering Diameter [mm]: 98,0
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 130,0
  • Minimum thickness [mm]: 32,0
  • Inner Diameter [mm]: 173,5
  • MAPP code available
  • Bore Diameter [mm]: 15,4
  • Item number: 24.0134-0101.1
  • Manufacturer: ATE
  • EAN number: 4006633301817
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock (Item(s) left: 5)
-60%
compared to RRP 303,33 €

118,99 €
Price per item

price incl. 19% VAT

free delivery

  • Fitting Position: Rear Axle
  • Diameter [mm]: 299
  • Brake Disc Type: Perforated, Vented
  • Drilled: yes
  • Surface: Coated
  • Brake Disc Thickness [mm]: 24
  • Height [mm]: 75
  • Centering Diameter [mm]: 98
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 130
  • Minimum thickness [mm]: 22
  • fulfils ECE norm: ECE-R90
  • Bore Diameter up to [mm]: 15,4
  • Item number: 0 986 478 592
  • Manufacturer: BOSCH
  • EAN number: 3165143278215
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock (Item(s) left: 6)
-69%
compared to RRP 226,10 €

69,49 €
Price per item

price incl. 19% VAT

excl. delivery costs

Find the best offers on