Vehicle identification number: 0005CFK
Mini Convertible F57 2.0 Cooper S Parts kit, automatic transmission oil change (163 hp Petrol B48 A20 A)
- Quantity Unit: Set
- Supplementary Article / Supplementary Info Info 2: with seal ring, with oil quantity for standard oil change
- See accessories list for additionally required parts
- Transmission Code: 8F22AW, GA8F22AW, TF-72SC, GA6F21AW, 6F21AW
- Transmission Type: 8-Speed Automatic Transmission, 6-Speed Automatic Transmission
- Capacity [litre]: 5
- Recommended change interval [km]: 80000
- Recommended change interval [years]: 5
- Item number: V20-4186
- Our price: 149,01 €
- Manufacturer: VAICO
- EAN number: 4062375299409
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
- Quantity Unit: Set
- Supplementary Article / Supplementary Info Info 2: with oil quantity for standard oil change
- See accessories list for additionally required parts
- Supplementary Article / Supplementary Info: with oil drain plug
- Transmission Code: 700.4, DCT7, DW5, 7DCT300
- Transmission Type: 7-Speed Automatic Transmission, 7-Speed Dual-Clutch Transmission
- Capacity [litre]: 5
- Recommended change interval [km]: 100000
- Recommended change interval [years]: 6
- Item number: V20-4300
- Our price: 150,86 €
- Manufacturer: VAICO
- EAN number: 4062375316571
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
- Quantity Unit: Set
- Supplementary Article / Supplementary Info Info 2: with seal ring, with oil quantity for oil flushing
- See accessories list for additionally required parts
- Transmission Code: 8F22AW, GA8F22AW, TF-72SC, GA6F21AW, 6F21AW
- Transmission Type: 8-Speed Automatic Transmission, 6-Speed Automatic Transmission
- Capacity [litre]: 10
- Recommended change interval [km]: 80000
- Recommended change interval [years]: 5
- Item number: V20-4186-XXL
- Our price: 210,65 €
- Manufacturer: VAICO
- EAN number: 4062375299430
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Diameter [mm]: 259
- Brake Disc Type: solid
- Product line: COAT Z
- Brake Disc Thickness [mm]: 10
- Fitting Position: Rear Axle
- Height [mm]: 51
- Surface: Coated
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 8,4
- Weight [kg]: 3,60
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Item number: 150.2928.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238762096
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Quantity Unit: Axle Set
- Brake System: TRW
- Wear Warning Contact: prepared for wear warning indicator
- Fitting Position: Front Axle
- Supplementary Article / Supplementary Info: with accessories
- Height 1 [mm]: 70,6
- Height 2 [mm]: 63,8
- Width 2 [mm]: 129
- Width 1 [mm]: 129
- Thickness 1 [mm]: 18,2
- Thickness 2 [mm]: 18,2
- WVA Number: 25207, 25208
- Test Mark: E9 90R-02A0823 / 4180
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- FMSI Code: D1801-9033
- Friction Lining Material: Semi-Metallic
- Item number: LP2717
- Our price: 36,02 €
- Manufacturer: DELPHI
- EAN number: 5012759527993
- Condition: New
2 pairs of pads
-
- Fitting Position: Rear Axle
- Vehicle Equipment: for vehicles without cruise control
- Construction Year to: 06 / 2019
- Quantity Unit: Axle Set
- Wear Warning Contact: prepared for wear warning indicator
- Thickness [mm]: 16,8
- Supplementary Article / Supplementary Info: with accessories
- Height 1 [mm]: 38,2
- Height 2 [mm]: 45,7
- Width [mm]: 100
- Test Mark: E9 90R-02A0120 / 4154
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Manufacturer Restriction: TRW
- Item number: GDB2088
- Our price: 40,56 €
- Manufacturer: TRW
- EAN number: 3322938289324
- Condition: New
-
- Fitting Position: Front Axle
- for special equipment code: S1DFA
- Braking System: for vehicles with a standard brake system
- Diameter [mm]: 307
- Brake Disc Type: internally vented, Perforated
- Brake Disc Thickness [mm]: 24
- Height [mm]: 45
- Surface: Coated
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22,4
- Weight [kg]: 7,8
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Drilled: yes
- Item number: 150.2929.52
- Manufacturer: ZIMMERMANN
- EAN number: 4250238764809
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- TecDoc Engine Number: B46 A20 A
-
- TecDoc Engine Number: B48 A20 A
- for brake disc diameter [mm]: 294
- Quantity Unit: Axle Set
- Wear Warning Contact: prepared for wear warning indicator
- Fitting Position: Front Axle
- Length [mm]: 129
- Width [mm]: 71, 65
- Thickness 1 [mm]: 18
- Test Mark: ECE R90 Approved
- Weight [kg]: 1,770
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Observe service information
- Item number: ADB114215
- Our price: 31,69 €
- Manufacturer: BLUE PRINT
- EAN number: 5050063223743
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity Unit: Axle Set
- Wear Warning Contact: prepared for wear warning indicator
- Fitting Position: Rear Axle
- Length [mm]: 100
- Width [mm]: 45, 38
- Thickness 1 [mm]: 16
- Test Mark: ECE R90 Approved
- Weight [kg]: 0,776
- Supplementary Article / Supplementary Info Info 2: with fastening material
- Vehicle Equipment: for vehicles without electric parking brake
- Observe service information
- Item number: ADB114216
- Our price: 29,87 €
- Manufacturer: BLUE PRINT
- EAN number: 5050063223750
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Diameter [mm]: 259
- Brake Disc Type: solid
- Product line: COATED
- Brake Disc Thickness [mm]: 10
- Fitting Position: Rear Axle
- Height [mm]: 50,8
- Surface: Coated
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 8,4
- Hub Diameter [mm]: 164
- Weight [kg]: 3,6
- Drilled: no
- Item number: 18429
- Manufacturer: A.B.S.
- EAN number: 8717109642599
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Article number of recommended accessories: 98052100
- Quantity Unit: Axle Set
- Brake System: TRW
- Wear Warning Contact: prepared for wear warning indicator
- Thickness [mm]: 16,6
- Supplementary Article / Supplementary Info: with accessories
- Height 1 [mm]: 44,7
- Height 2 [mm]: 37,9
- Width [mm]: 99,9
- WVA Number: 25980
- Weight [kg]: 0,66
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Packaging length [cm]: 12,5
- Packaging width [cm]: 8,1
- Packaging height [cm]: 8
- Item number: 2598001
- Our price: 49,04 €
- Manufacturer: TEXTAR
- EAN number: 4019722465550
- Condition: New
- Quantity Unit: Axle Set
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 16,6
- Fitting Position: Rear Axle
- Height [mm]: 38,1
- Height 2 [mm]: 44,8
- Width [mm]: 99,9
- Weight [kg]: 0,78, 0,8
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Item number: SKBP-0011438
- Our price: 13,00 €
- Manufacturer: STARK
- EAN number: 4059191135462
- Condition: New
- Quantity Unit: Axle Set
- Brake System: Lucas / TRW
- Wear Warning Contact: prepared for wear warning indicator
- Fitting Position: Rear Axle
- Number of wear indicators [per axle]: 1
- Height 1 [mm]: 38,1
- Height 2 [mm]: 44,8
- Width 2 [mm]: 99,9
- Width 1 [mm]: 99,9
- Thickness 1 [mm]: 16
- Thickness 2 [mm]: 16,6
- Weight [kg]: 0,77
- Warning Contact Length [mm]: 640
- Item number: 35049
- Our price: 24,37 €
- Manufacturer: A.B.S.
- EAN number: 8717109643657
- Condition: New
-
- Fitting Position: Rear Axle
- for article number: LX0729
- Quantity Unit: Axle Set
- Brake System: TRW
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article / Supplementary Info: with accessories
- Height 1 [mm]: 44,3
- Height 2 [mm]: 37,8
- Width 2 [mm]: 99,9
- Width 1 [mm]: 99,9
- Thickness 1 [mm]: 16,6
- Thickness 2 [mm]: 16,6
- WVA Number: 25980, 25981
- Test Mark: E9 90R-02A0825 / 4183
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- FMSI Code: D1800-9032
- Friction Lining Material: Semi-Metallic
- Item number: LP2762
- Our price: 27,67 €
- Manufacturer: DELPHI
- EAN number: 5012759528013
- Condition: New
2 pairs of pads
-
- Fitting Position: Front Axle
- for special equipment code: S1DFA
- Braking System: for vehicles with a standard brake system
- Diameter [mm]: 307
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 24
- Height [mm]: 45
- Surface: Coated
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22,4
- Weight [kg]: 7,8
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Item number: 150.2929.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238764489
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 259
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Fitting Position: Rear Axle
- Surface: Coated
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 51
- Minimum thickness [mm]: 8,4
- Weight [kg]: 3,60
- Number of mounting bores: 1
- Observe service information
- Drilled: no
- Item number: ADB114320
- Manufacturer: BLUE PRINT
- EAN number: 5050063228595
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Quantity Unit: Axle Set
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 16,6
- Fitting Position: Rear Axle
- Height [mm]: 38,1
- Height 2 [mm]: 44,8
- Width [mm]: 99,9
- Weight [kg]: 0,78, 0,8
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Item number: 402B0844
- Our price: 15,68 €
- Manufacturer: RIDEX
- EAN number: 4059191148417
- Condition: New
-
- Fitting Position: Front Axle
- Article number of recommended accessories: 98052700
- Quantity Unit: Axle Set
- Brake System: Lucas
- Wear Warning Contact: prepared for wear warning indicator
- Thickness [mm]: 18,3
- Height 1 [mm]: 64,2
- Height 2 [mm]: 70,6
- Width [mm]: 128,9
- WVA Number: 22187
- Weight [kg]: 1,66
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Packaging length [cm]: 15,2
- Packaging width [cm]: 8,8
- Packaging height [cm]: 8,4
- Item number: 2218701
- Our price: 66,34 €
- Manufacturer: TEXTAR
- EAN number: 4019722476587
- Condition: New
-
- Fitting Position: Front Axle
- not for special equipment code: S1DFA
- Braking System: for vehicles with a standard brake system
- Diameter [mm]: 294
- Brake Disc Type: internally vented
- Product line: COAT Z
- Brake Disc Thickness [mm]: 22
- Height [mm]: 45
- Surface: Coated
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20,4
- Weight [kg]: 6,3
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Item number: 150.2927.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238762676
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 294
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Fitting Position: Front Axle
- Height [mm]: 45,2
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Minimum thickness [mm]: 20,4
- Weight [kg]: 6,22
- Drilled: no
- Item number: 61545.10
- Manufacturer: REMSA
- EAN number: 8427975165541
- Condition: New
price incl. 19% VAT
excl. delivery costs