Vehicle identification number: 1313HPS
Mercedes W177 A 180 d Parts kit, automatic transmission oil change (116 hp Diesel OM 608.915 (K9K))
- Quantity Unit: Set
- Supplementary Article / Supplementary Info Info 2: with oil quantity for standard oil change
- See accessories list for additionally required parts
- Supplementary Article / Supplementary Info: with oil drain plug
- Transmission Code: 700.4, DCT7, DW5, 7DCT300
- Transmission Type: 7-Speed Automatic Transmission, 7-Speed Dual-Clutch Transmission
- Capacity [litre]: 5
- Recommended change interval [km]: 100000
- Recommended change interval [years]: 6
- Item number: V20-4300
- Our price: 124,99 €
- Manufacturer: VAICO
- EAN number: 4062375316571
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
- Fitting Position: Rear Axle
- Brake System: TRW
- Wear Warning Contact: not prepared for wear warning indicator
- Supplementary Article / Supplementary Info: with accessories
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Thickness [mm]: 17,3
- Height [mm]: 48,8
- Width [mm]: 106,2
- Weight [kg]: 1,1
- Vehicle Equipment: for vehicles without sports package
- Item number: TX 12-08
- Our price: 25,99 €
- Manufacturer: TOMEX brakes
- EAN number: 5906485552865
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 350
- Brake Disc Type: perforated / vented
- Drilled: yes
- Surface: Coated
- Brake Disc Thickness [mm]: 30
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 51
- Minimum thickness [mm]: 28
- Number of mounting bores: 1
- Braking System: for vehicles with sports brake system
- Observe service information
- Item number: 107510
- Manufacturer: FEBI BILSTEIN
- EAN number: 4054224075104
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 320
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 43
- Minimum thickness [mm]: 10,3
- Number of mounting bores: 1
- Observe service information
- Item number: 107513
- Manufacturer: FEBI BILSTEIN
- EAN number: 4054224075135
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 305
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 28
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 51
- Minimum thickness [mm]: 25,4
- Number of mounting bores: 1
- Observe service information
- Item number: ADU1743114
- Manufacturer: BLUE PRINT
- EAN number: 5057746133061
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Brake System: CBI
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article / Supplementary Info: with accessories
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
-
- Vehicle Equipment: for vehicles with AMG Sports Package
- for special equipment code: 950
- for article number: LX0631
- Braking System: for vehicles with a standard brake system
- Height 1 [mm]: 72
- Height 2 [mm]: 62,7
- Width 2 [mm]: 134,1
- Width 1 [mm]: 134,1
- Thickness 1 [mm]: 19
- Thickness 2 [mm]: 19
- WVA Number: 22940, 22941
- Test Mark: E9 90R-02A0823 / 5313
- Friction Lining Material: Semi-Metallic
- Item number: LP3485
- Our price: 41,99 €
- Manufacturer: DELPHI
- EAN number: 5012759545546
- Condition: New
- Fitting Position: Front Axle
- Brake System: CBI
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article / Supplementary Info: with accessories
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
-
- Braking System: for vehicles with Performance brakes
- for article number: LX0753
- Height 1 [mm]: 80,6
- Height 2 [mm]: 71,3
- Width 2 [mm]: 163,3
- Width 1 [mm]: 163,3
- Thickness 1 [mm]: 18,8
- Thickness 2 [mm]: 18,1
- WVA Number: 22944, 22945
- Test Mark: E9 90R-02A0841 / 5269
- FMSI Code: D2209-9449
- Friction Lining Material: Semi-Metallic
- Item number: LP3437
- Our price: 43,49 €
- Manufacturer: DELPHI
- EAN number: 5012759542644
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Brake System: CBI
- Wear Warning Contact: not prepared for wear warning indicator
- Supplementary Article / Supplementary Info: with accessories
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- for article number: LX0631
- Height 1 [mm]: 48,6
- Height 2 [mm]: 48,6
- Width 2 [mm]: 106
- Width 1 [mm]: 106
- Thickness 1 [mm]: 17,2
- Thickness 2 [mm]: 17,2
- WVA Number: 22986
- Test Mark: E9 90R-02A0825 / 5312
- FMSI Code: D2207-9447
- Friction Lining Material: Low-Metallic
- Item number: LP3438
- Our price: 49,49 €
- Manufacturer: DELPHI
- EAN number: 5012759542651
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Brake System: CBI
- Wear Warning Contact: not prepared for wear warning indicator
- Supplementary Article / Supplementary Info: with accessories
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
-
- Vehicle Equipment: for vehicles with sports package
- for special equipment code: U29
- for article number: LX0631
- Height 1 [mm]: 53,9
- Height 2 [mm]: 53,9
- Width 2 [mm]: 113
- Width 1 [mm]: 113
- Thickness 1 [mm]: 17,2
- Thickness 2 [mm]: 17,2
- WVA Number: 22987
- Test Mark: E9 90R-02A0825 / 5257
- FMSI Code: D2271-9511
- Friction Lining Material: Low-Metallic
- Item number: LP3439
- Our price: 48,99 €
- Manufacturer: DELPHI
- EAN number: 5012759545430
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Brake System: CBI
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 18,9
- Height [mm]: 70
- Width [mm]: 184,8
- fulfils ECE norm: E9
- Item number: RA.1242.0
- Our price: 84,49 €
- Manufacturer: RAICAM
- EAN number: 8019951084269
- Condition: New
- Fitting Position: Rear Axle
- Brake System: TRW
- Wear Warning Contact: excl. wear warning contact
-
- for special equipment code: U29
- Vehicle Equipment: for vehicles with sports package
- for OE number: 0004201706
- Thickness [mm]: 17,2
- Height [mm]: 54,2
- Width [mm]: 113
- fulfils ECE norm: E9
- Item number: RA.1243.0
- Our price: 82,99 €
- Manufacturer: RAICAM
- EAN number: 8019951084276
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 295
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 24
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 51
- Minimum thickness [mm]: 21,4
- Number of mounting bores: 1
- Observe service information
- Item number: 107509
- Manufacturer: FEBI BILSTEIN
- EAN number: 4054224075098
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 305
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 28
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 51
- Minimum thickness [mm]: 25,4
- Number of mounting bores: 1
- Observe service information
- Item number: 107511
- Manufacturer: FEBI BILSTEIN
- EAN number: 4054224075111
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 276
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 11
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 43
- Minimum thickness [mm]: 9,3
- Number of mounting bores: 1
- Observe service information
- Item number: 107512
- Manufacturer: FEBI BILSTEIN
- EAN number: 4054224075128
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 295
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 24
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 51
- Minimum thickness [mm]: 21,4
- Number of mounting bores: 1
- Observe service information
- Item number: ADU1743112
- Manufacturer: BLUE PRINT
- EAN number: 5057746133047
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 350
- Brake Disc Type: perforated / vented
- Drilled: yes
- Surface: Coated
- Brake Disc Thickness [mm]: 30
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 51
- Minimum thickness [mm]: 28
- Number of mounting bores: 1
- Braking System: for vehicles with sports brake system
- Observe service information
- Item number: ADU1743113
- Manufacturer: BLUE PRINT
- EAN number: 5057746133054
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 276
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 11
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 43
- Minimum thickness [mm]: 9,3
- Number of mounting bores: 1
- Observe service information
- Item number: ADU1743115
- Manufacturer: BLUE PRINT
- EAN number: 5057746133443
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 320
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 43
- Minimum thickness [mm]: 10,3
- Number of mounting bores: 1
- Observe service information
- Item number: ADU1743116
- Manufacturer: BLUE PRINT
- EAN number: 5057746133450
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Wear Warning Contact: not prepared for wear warning indicator
- Height 1 [mm]: 49,2
- Width 1 [mm]: 105,9
- Thickness 1 [mm]: 17,2
- Weight [kg]: 1,22
- Item number: 35218
- Our price: 25,49 €
- Manufacturer: A.B.S.
- EAN number: 8717109737455
- Condition: New
- Fitting Position: Rear Axle
- Wear Warning Contact: not prepared for wear warning indicator
- Braking System: for vehicles with Performance brakes
- Height 1 [mm]: 54,2
- Width 1 [mm]: 113
- Thickness 1 [mm]: 17,2
- Weight [kg]: 1,49
- Item number: 35219
- Our price: 28,49 €
- Manufacturer: A.B.S.
- EAN number: 8717109737493
- Condition: New