FORD Mondeo Mk5 Saloon (CD) 2.5 Parts kit, automatic transmission oil change (149 hp Petrol S7CB)
Recommended part replacement interval for your car for the part category Parts kit, automatic transmission oil change: every 50.000 km / every 24 months
- Quantity Unit: Set
- Supplementary Article / Supplementary Info Info 2: with oil quantity for standard oil change, with seal ring
- Clutch: for vehicles with double clutch
- See accessories list for additionally required parts
- Supplementary Article / Supplementary Info: with gasket / seal
- Transmission Code: DCT470, DW6, MPS6 POWERSHIFT, DCT450, 6DCT450, Powershift
- Transmission Type: 6-Speed Dual-Clutch Transmission, for 6-speed dual-clutch transmission, 6-Speed Automatic Transmission
- Weight [kg]: 6,36
- Capacity [litre]: 6
- Recommended change interval [years]: 5
- Recommended change interval [km]: 45000
- Packaging width [cm]: 25,1
- Packaging height [cm]: 28,1
- Packaging Depth [cm]: 32
- Item number: V25-0796
- Our price: 182,99 €
- Manufacturer: VAICO
- EAN number: 4046001637476
- Condition: New
In the warranty, we always make a distinction between wear In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage. reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos. measurement, including photos.
For brake disks and brake pads, the break-in requirements For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be regard to wobble, and the appropriate documentation must be produced. produced.
If the vehicle is no longer in its original condition due to If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. vehicle is used for motor sports or similar events.
price incl. 19% VAT
- Quantity Unit: Set
- Supplementary Article / Supplementary Info Info 2: with oil quantity for oil flushing, with seal ring
- Clutch: for vehicles with double clutch
- See accessories list for additionally required parts
- Supplementary Article / Supplementary Info: with gasket / seal
- Transmission Code: DCT450, DCT470, MPS6 POWERSHIFT, SPS6 POWERSHIFT, DW6, 6DCT450, Powershift
- Transmission Type: 6-Speed Dual-Clutch Transmission, 6-Speed Automatic Transmission
- Weight [kg]: 8,398
- Capacity [litre]: 8
- Supplementary Info: EXPERT KITS +
- Recommended change interval [years]: 5
- Recommended change interval [km]: 45000
- Packaging width [cm]: 25,1
- Packaging height [cm]: 28,1
- Packaging Depth [cm]: 32
- Item number: V25-0796-XXL
- Our price: 191,99 €
- Manufacturer: VAICO
- EAN number: 4046001910852
- Condition: New
In the warranty, we always make a distinction between wear In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage. reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos. measurement, including photos.
For brake disks and brake pads, the break-in requirements For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be regard to wobble, and the appropriate documentation must be produced. produced.
If the vehicle is no longer in its original condition due to If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. vehicle is used for motor sports or similar events.
price incl. 19% VAT
- Fitting Position: Front Axle
- Brake System: ATE
- Wear Warning Contact: incl. wear warning contact
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Thickness [mm]: 20
- Supplementary Info: ORIGINAL Quality
- Quantity Unit: Axle Set
- Number of wear indicators [per axle]: 1
- Height 1 [mm]: 66
- Height 2 [mm]: 71,5
- Width 2 [mm]: 156,5
- Width 1 [mm]: 155,2
- Warning Contact Length [mm]: 155
- Item number: 025 235 8720/W
- Our price: 29,99 €
- Manufacturer: MEYLE
- EAN number: 4040074351222
- Condition: New
- Fitting Position: Front Axle
- Brake System: ATE
- Wear Warning Contact: not prepared for wear warning indicator
- Braking System: for vehicles without Performance brakes
- Thickness [mm]: 20,5
- Quantity Unit: Axle Set
- Height 1 [mm]: 66,6
- Height 2 [mm]: 72
- Width 2 [mm]: 156,3
- Width 1 [mm]: 155,1
- WVA Number: 24123
- Weight [kg]: 2,2
- Article number of recommended accessories: 82039300
- Packaging length [cm]: 17
- Packaging width [cm]: 12
- Packaging height [cm]: 8,3
- Item number: 2412301
- Our price: 42,99 €
- Manufacturer: TEXTAR
- EAN number: 4019722287909
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 300
- Brake Disc Type: internally vented, Perforated
- Drilled: yes
- Surface: Coated
- Product line: SPORT COAT Z
- Brake Disc Thickness [mm]: 28
- Height [mm]: 51
- Centering Diameter [mm]: 64
- Rim Hole Number: 5
- Hole Arrangement / Number: 5 / 5
- Bolt Hole Circle Ø [mm]: 108
- Minimum thickness [mm]: 26,5
- Weight [kg]: 8,70
- Test Mark: ECE R90 APPROVED
- Item number: 250.1375.52
- Manufacturer: ZIMMERMANN
- EAN number: 4250238764939
- Condition: New
price incl. 19% VAT
- Fitting Position: Rear Axle
- Diameter [mm]: 302
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Product line: COAT Z
- Brake Disc Thickness [mm]: 11
- Height [mm]: 51
- Centering Diameter [mm]: 64
- Rim Hole Number: 5
- Hole Arrangement / Number: 5 / 5
- Bolt Hole Circle Ø [mm]: 108
- Minimum thickness [mm]: 9,5
- Weight [kg]: 5,1
- Test Mark: ECE R90 APPROVED
- Item number: 250.1376.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238763963
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Wear Warning Contact: with acoustic wear warning
- Supplementary Article / Supplementary Info: with spring
- Supplementary Article / Supplementary Info Info 2: with adhesive film
- Thickness [mm]: 19
- Quantity Unit: Axle Set
- Number of wear indicators [per axle]: 2
- Length [mm]: 155,8, 155,2
- Height [mm]: 75,9
- Height 2 [mm]: 66,7
- Thickness 2 [mm]: 20
- Item number: 1249.22
- Our price: 38,49 €
- Manufacturer: REMSA
- EAN number: 8427975043320
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 302
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Product line: COATED
- Brake Disc Thickness [mm]: 11
- Height [mm]: 51
- Centering Diameter [mm]: 64
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 108
- Minimum thickness [mm]: 9,5
- Hub Diameter [mm]: 165
- Weight [kg]: 5,18
- Item number: 18392
- Manufacturer: A.B.S.
- EAN number: 8717109640786
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Wear Warning Contact: with acoustic wear warning
- Supplementary Article / Supplementary Info: with accessories, with spring
- Supplementary Article / Supplementary Info Info 2: with adhesive film
- Thickness [mm]: 15,2
- Quantity Unit: Axle Set
- Number of wear indicators [per axle]: 2
- Length [mm]: 123
- Height [mm]: 48,6
- Item number: 1551.12
- Our price: 31,49 €
- Manufacturer: REMSA
- EAN number: 8427975043344
- Condition: New
- Fitting Position: Front Axle
- Brake System: ATE
- Wear Warning Contact: incl. wear warning contact
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Thickness [mm]: 20
- Supplementary Info: MEYLE-PD Quality
- Quantity Unit: Axle Set
- Number of wear indicators [per axle]: 1
- Height 1 [mm]: 66
- Height 2 [mm]: 71,5
- Width 2 [mm]: 156,5
- Width 1 [mm]: 155,2
- Warning Contact Length [mm]: 135
- Quality: PREMIUM
- Item number: 025 235 8720/PD
- Our price: 42,99 €
- Manufacturer: MEYLE
- EAN number: 4040074141205
- Condition: New
Different chamfers on the leading and trailing edges of the MEYLE-PD brake pads have a very short brake-in time, to brake pads support the silent performance of MEYLE-PD. ensure safe initial braking and high performance from the start. MEYLE-PD brake pads have a brake-in coating on the To ensure this silent performance, slotting and chamfer are individually designed for each brake pad. pad or are treated with scorching technology.
- Fitting Position: Rear Axle
- Brake System: ATE
- not for country specific design: Europe
- Thickness [mm]: 15,7
- Quantity Unit: Axle Set
- Height [mm]: 48,7
- Width [mm]: 123,1
- Item number: 05P1915
- Our price: 64,49 €
- Manufacturer: LPR
- EAN number: 8032928160674
- Condition: New
- Fitting Position: Front Axle
- Brake System: ATE
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Supplementary Article / Supplementary Info Info 2: with piston clip, with anti-squeak plate
- Braking System: for vehicles without Performance brakes
- Thickness [mm]: 20
- Product line: Prime
- Quantity Unit: Axle Set
- Height 1 [mm]: 67
- Height 2 [mm]: 72
- Width 2 [mm]: 156
- Width 1 [mm]: 155
- WVA Number: 24123, 24124
- Item number: P 24 076
- Our price: 30,49 €
- Manufacturer: BREMBO
- EAN number: 8020584060490
- Condition: New
- Fitting Position: Front Axle
- Brake System: ATE
- Wear Warning Contact: not prepared for wear warning indicator
- Braking System: for vehicles without Performance brakes
- Quantity Unit: Axle Set
- Height 1 [mm]: 66,7
- Height 2 [mm]: 72
- Width 2 [mm]: 156,4
- Width 1 [mm]: 155,2
- Thickness 1 [mm]: 19
- Thickness 2 [mm]: 20
- Item number: 05P1255
- Our price: 31,99 €
- Manufacturer: LPR
- EAN number: 8032928004510
- Condition: New
- Fitting Position: Front Axle
- Wear Warning Contact: not prepared for wear warning indicator
- Material: Low-Metallic
- Supplementary Article / Supplementary Info Info 2: with piston clip
-
- Manufacturer Restriction: Motorcraft
- Braking System: for vehicles without Performance brakes
- Thickness [mm]: 20,3
- Quantity Unit: Axle Set
- Height 1 [mm]: 66,6
- Height 2 [mm]: 72
- Width 2 [mm]: 156,3
- Width 1 [mm]: 155,1
- WVA Number: 24123
- Weight [kg]: 2,2
- fulfils ECE norm: ECE-R90
- Item number: SKBP-0010051
- Our price: 21,49 €
- Manufacturer: STARK
- EAN number: 4059191036691
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Product line: COAT Z
- Brake Disc Thickness [mm]: 28
- Height [mm]: 51
- Centering Diameter [mm]: 64
- Rim Hole Number: 5
- Hole Arrangement / Number: 5 / 5
- Bolt Hole Circle Ø [mm]: 108
- Minimum thickness [mm]: 26,5
- Weight [kg]: 8,80
- Test Mark: ECE R90 APPROVED
- Item number: 250.1375.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238764571
- Condition: New
price incl. 19% VAT
- Fitting Position: Front Axle
- Wear Warning Contact: not prepared for wear warning indicator
- Material: Low-Metallic
- Supplementary Article / Supplementary Info Info 2: with piston clip
-
- Manufacturer Restriction: Motorcraft
- Braking System: for vehicles without Performance brakes
- Thickness [mm]: 20,3
- Quantity Unit: Axle Set
- Height 1 [mm]: 66,6
- Height 2 [mm]: 72
- Width 2 [mm]: 156,3
- Width 1 [mm]: 155,1
- WVA Number: 24123
- Weight [kg]: 2,2
- fulfils ECE norm: ECE-R90
- Item number: 402B0052
- Our price: 19,49 €
- Manufacturer: RIDEX
- EAN number: 4059191314768
- Condition: New
- Fitting Position: Rear Axle
- Brake System: ATE
- Wear Warning Contact: without integrated wear sensor
- Quantity Unit: Axle Set
- Height 1 [mm]: 48,7
- Height 2 [mm]: 53,5
- Width 2 [mm]: 123,2
- Width 1 [mm]: 123,2
- Thickness 1 [mm]: 15,7
- Thickness 2 [mm]: 15,7
- Weight [kg]: 1,01
- Item number: 35060
- Our price: 28,49 €
- Manufacturer: A.B.S.
- EAN number: 8717109647167
- Condition: New
- Fitting Position: Rear Axle
- Brake System: ATE
- Wear Warning Contact: with acoustic wear warning
- Supplementary Article / Supplementary Info: with accessories
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- for article number: LX0571
- Quantity Unit: Axle Set
- Height 1 [mm]: 48,3
- Height 2 [mm]: 53
- Width 2 [mm]: 123,2
- Width 1 [mm]: 123,2
- Thickness 1 [mm]: 15
- Thickness 2 [mm]: 15
- WVA Number: 22231, 22232, 22233
- Test Mark: E9 90R-02A0825 / 4319
- FMSI Code: D1665-8893 D1834-889
- Friction Lining Material: Semi-Metallic
- Item number: LP3151
- Our price: 29,99 €
- Manufacturer: DELPHI
- EAN number: 5012759532669
- Condition: New
2 plain pads, 2 pads + W.I. handed
- Fitting Position: Rear Axle
- Brake System: 16"\17''
- Wear Warning Contact: excl. wear warning contact
- Thickness [mm]: 15,9
- Quantity Unit: Axle Set
- Height 1 [mm]: 53,2
- Height 2 [mm]: 48,4
- Width [mm]: 123,2
- WVA Number: 22531
- Item number: SKBP-0011679
- Our price: 16,99 €
- Manufacturer: STARK
- EAN number: 4059191484775
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 302
- Brake Disc Type: solid, internally vented
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 11
- Height [mm]: 50,8
- Centering Diameter [mm]: 63,5
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 108
- Minimum thickness [mm]: 9,5
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 13,8
- Item number: 0 986 479 D37
- Manufacturer: BOSCH
- EAN number: 4047025568173
- Condition: New
price incl. 19% VAT
excl. delivery costs