Vehicle identification number: 0005BZH
BMW F46 220 d xDrive Parts kit, automatic transmission oil change (163 hp Diesel B47 C20 B)
- Quantity Unit: Set
- Supplementary Article / Supplementary Info Info 2: with seal ring, with oil quantity for standard oil change
- Transmission ID: GA8G45AW
- See accessories list for additionally required parts
- Transmission Type: 8-Speed Automatic Transmission
- Capacity [litre]: 5
- Recommended change interval [km]: 80000
- Recommended change interval [years]: 5
- Item number: V20-4670
- Our price: 108,49 €
- Manufacturer: VAICO
- EAN number: 4062375401246
- Condition: New
price incl. 19% VAT
- Quantity Unit: Set
- Supplementary Article / Supplementary Info Info 2: with seal ring, with oil quantity for standard oil change
- See accessories list for additionally required parts
- Transmission Code: 8F22AW, GA8F22AW, TF-72SC, GA6F21AW, 6F21AW
- Transmission Type: 8-Speed Automatic Transmission, 6-Speed Automatic Transmission
- Capacity [litre]: 5
- Recommended change interval [km]: 80000
- Recommended change interval [years]: 5
- Item number: V20-4186
- Our price: 123,49 €
- Manufacturer: VAICO
- EAN number: 4062375299409
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
- Quantity Unit: Set
- Supplementary Article / Supplementary Info Info 2: with seal ring, with oil quantity for oil flushing
- See accessories list for additionally required parts
- Transmission Code: 8F22AW, GA8F22AW, TF-72SC, GA6F21AW, 6F21AW
- Transmission Type: 8-Speed Automatic Transmission, 6-Speed Automatic Transmission
- Capacity [litre]: 10
- Recommended change interval [km]: 80000
- Recommended change interval [years]: 5
- Item number: V20-4186-XXL
- Our price: 174,49 €
- Manufacturer: VAICO
- EAN number: 4062375299430
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
- Quantity Unit: Set
- Supplementary Article / Supplementary Info Info 2: with seal ring, with oil quantity for oil flushing
- Transmission ID: GA8G45AW
- See accessories list for additionally required parts
- Transmission Type: 8-Speed Automatic Transmission
- Capacity [litre]: 10
- Recommended change interval [km]: 80000
- Recommended change interval [years]: 5
- Item number: V20-4670-XXL
- Our price: 212,50 €
- Manufacturer: VAICO
- EAN number: 4062375401253
- Condition: New
price incl. 19% VAT
- Fitting Position: Rear Axle
- Operating Mode: Electric-hydraulic
- Supplementary Article / Supplementary Info: with fastening / mounting material
- Supplementary Article / Supplementary Info Info 2: with bolts / screws, with seal ring, with oil quantity for standard oil change
- Clutch ID: HALDEX GEN V / 5
- Capacity [litre]: 0,85
- Item number: V20-4074
- Our price: 260,00 €
- Manufacturer: VAICO
- EAN number: 4062375274802
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Fitting Position: Rear Axle
- Brake System: BOSCH
- Wear Warning Contact: without integrated wear sensor
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Thickness [mm]: 17,5
- Quantity Unit: Axle Set
- Height [mm]: 45,2
- Height 2 [mm]: 46,6
- Width [mm]: 123
- Width 2 [mm]: 123
- Thickness 2 [mm]: 17,5
- WVA Number: 25307
- Test Mark: ECE-R90
- Weight [kg]: 0,975
- Item number: 601311
- Our price: 29,49 €
- Manufacturer: VALEO
- EAN number: 3276426013116
- Condition: New
1923-2023: 100 years of braking
- Fitting Position: Front Axle
- Wear Warning Contact: excl. wear warning contact, prepared for wear warning indicator
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate, with piston clip
- Thickness [mm]: 19,2
- Quantity Unit: Axle Set
- Height [mm]: 70
- Width [mm]: 148
- WVA Number: 25200
- Weight [kg]: 2,025
- Item number: SKBP-0011074
- Our price: 19,49 €
- Manufacturer: STARK
- EAN number: 4059191283835
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 330
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Product line: COAT Z
- Brake Disc Thickness [mm]: 24
- Height [mm]: 45
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22,4
- Weight [kg]: 9,2
- Test Mark: ECE R90 APPROVED
- Item number: 150.2930.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238764472
- Condition: New
price incl. 19% VAT
- Fitting Position: Front Axle
- Diameter [mm]: 330
- Brake Disc Type: internally vented, Perforated
- Drilled: yes
- Surface: Coated
- Machining: High-carbon
- Product line: SPORT COAT Z
- Brake Disc Thickness [mm]: 24
- Height [mm]: 45
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22,4
- Weight [kg]: 9,2
- Test Mark: ECE R90 APPROVED
- Item number: 150.2930.52
- Manufacturer: ZIMMERMANN
- EAN number: 4250238764816
- Condition: New
price incl. 19% VAT
- Fitting Position: Rear Axle
- Diameter [mm]: 280
- Construction Year to: 02 / 2018
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Product line: COAT Z
- Brake Disc Thickness [mm]: 10
- Height [mm]: 51
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 8,4
- Weight [kg]: 4
- Test Mark: ECE R90 APPROVED
- Item number: 150.2931.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238764243
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Construction Year from: 03 / 2018
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Product line: COAT Z
- Brake Disc Thickness [mm]: 20
- Height [mm]: 51
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 18,4
- Weight [kg]: 5,5
- Test Mark: ECE R90 APPROVED
- Item number: 150.2932.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238764465
- Condition: New
price incl. 19% VAT
- Fitting Position: Rear Axle
- Wear Warning Contact: prepared for wear warning indicator
- Thickness [mm]: 16
- Quantity Unit: Axle Set
- Height [mm]: 46,6
- Width [mm]: 123
- Test Mark: E9 90R-02A0120 / 3972
- Manufacturer Restriction: ATE
- Item number: GDB2063
- Our price: 32,49 €
- Manufacturer: TRW
- EAN number: 3322938267414
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 330
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Product line: COATED
- Brake Disc Thickness [mm]: 24
- Height [mm]: 45,2
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22,4
- Hub Diameter [mm]: 160
- Weight [kg]: 9,11
- Item number: 18448
- Manufacturer: A.B.S.
- EAN number: 8717109647709
- Condition: New
price incl. 19% VAT
- Fitting Position: Front Axle
- Brake System: BOSCH
- Wear Warning Contact: without integrated wear sensor
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Thickness [mm]: 19,2
- Quantity Unit: Axle Set
- Height [mm]: 70
- Width [mm]: 148
- WVA Number: 25200
- Test Mark: ECE-R90
- Weight [kg]: 2,025
- Item number: 601288
- Our price: 51,99 €
- Manufacturer: VALEO
- EAN number: 3276426012881
- Condition: New
1923-2023: 100 years of braking
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Brake System: ATE
- Wear Warning Contact: prepared for wear warning indicator
- Quantity Unit: Axle Set
- Height 1 [mm]: 48
- Height 2 [mm]: 46,7
- Width 2 [mm]: 123,2
- Width 1 [mm]: 123,2
- Thickness 1 [mm]: 15,2
- Thickness 2 [mm]: 15,2
- Weight [kg]: 0,92
- Item number: 35030
- Our price: 20,49 €
- Manufacturer: A.B.S.
- EAN number: 8717109634365
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Construction Year from: 03 / 2018
- Brake Disc Type: internally vented, Perforated
- Drilled: yes
- Surface: Coated
- Machining: High-carbon
- Product line: SPORT COAT Z
- Brake Disc Thickness [mm]: 20
- Height [mm]: 51
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 18,4
- Weight [kg]: 5,5
- Test Mark: ECE R90 APPROVED
- Item number: 150.2932.52
- Manufacturer: ZIMMERMANN
- EAN number: 4250238764830
- Condition: New
price incl. 19% VAT
- Fitting Position: Rear Axle
- Brake System: ATE
- Construction Year from: 11 / 2018
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article / Supplementary Info: without accessories
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
-
- for brake disc diameter [mm]: 280, 300
- for article number: LX0683
- Quantity Unit: Axle Set
- Height 1 [mm]: 47,6
- Height 2 [mm]: 46,3
- Width 2 [mm]: 123,2
- Width 1 [mm]: 123,2
- Thickness 1 [mm]: 15,9
- Thickness 2 [mm]: 15,9
- WVA Number: 25331, 25332
- Test Mark: E9 90R-02A0825 / 3972
- FMSI Code: D1762-8993
- Friction Lining Material: Semi-Metallic
- Item number: LP2719
- Our price: 29,49 €
- Manufacturer: DELPHI
- EAN number: 5012759519745
- Condition: New
2 pairs of pads
- Fitting Position: Front Axle
- Wear Warning Contact: excl. wear warning contact, prepared for wear warning indicator
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate, with piston clip
- Thickness [mm]: 19,2
- Quantity Unit: Axle Set
- Height [mm]: 70
- Width [mm]: 148
- WVA Number: 25200
- Weight [kg]: 2,025
- Item number: 402B0510
- Our price: 17,99 €
- Manufacturer: RIDEX
- EAN number: 4059191321964
- Condition: New
- Fitting Position: Front Axle
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article / Supplementary Info: with accessories, with spring
- Supplementary Article / Supplementary Info Info 2: with adhesive film
- Thickness [mm]: 18,5
- Quantity Unit: Axle Set
- Length [mm]: 129
- Height [mm]: 70,4
- Height 2 [mm]: 75,4
- Item number: 1625.08
- Our price: 38,49 €
- Manufacturer: REMSA
- EAN number: 8427975042583
- Condition: New
- Fitting Position: Rear Axle
- Brake System: ATE
- Wear Warning Contact: prepared for wear warning indicator
- Article number of recommended accessories: 98052100
- Thickness [mm]: 16,2
- Quantity Unit: Axle Set
- Height 1 [mm]: 47,8
- Height 2 [mm]: 46,2
- Width [mm]: 123,2
- WVA Number: 25331
- Weight [kg]: 0,9
- Packaging length [cm]: 12,5
- Packaging width [cm]: 8,1
- Packaging height [cm]: 8
- Item number: 2533101
- Our price: 52,49 €
- Manufacturer: TEXTAR
- EAN number: 4019722469275
- Condition: New