Audi 80 B4 Avant 1.9 TD Parts kit, automatic transmission oil change (75 hp Diesel AAZ)
Recommended part replacement interval for your car for the part category Parts kit, automatic transmission oil change: every 50.000 km / every 24 months
- Supplementary Article / Supplementary Info: with gaskets / seals, with accessories
- Transmission Code: 01M, 01N, AG4
- Transmission Type: 4-Speed Automatic Transmission
- Item number: 73975Set
- Our price: 86,49 €
- Manufacturer: AIC
- EAN number: 4046283739752
- Condition: New
Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use.
For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules.
If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at:
Phone: 040 - 25 30 66 55 Email: [email protected]
This often avoids extensive troubleshooting that is disproportionate to normal repair times.
The following applies to complaints: The more complete the processes are submitted, the faster they can be processed.
Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Quantity Unit: Set
- Supplementary Article / Supplementary Info Info 2: with oil quantity for standard oil change
- Supplementary Article / Supplementary Info: with accessories, Oil Change by draining
- Transmission Code: 01N, AG4
- Transmission Type: 4-Speed Automatic Transmission
- Manufacturer Restriction: GRUPO VAG
- Capacity [litre]: 3
- Recommended change interval [km]: 60000
- Item number: 105.106.0003
- Our price: 155,99 €
- Manufacturer: TCMATIC
- EAN number: 8445059009802
- Condition: New
- Quantity Unit: Set
- Supplementary Article / Supplementary Info Info 2: with oil quantity for standard oil change
- Supplementary Article / Supplementary Info: with accessories, Oil Change by draining
- Transmission Code: 095
- Transmission Type: 4-Speed Automatic Transmission
- Manufacturer Restriction: GRUPO VAG
- Capacity [litre]: 3
- Recommended change interval [km]: 60000
- Item number: 105.106.0007
- Our price: 171,99 €
- Manufacturer: TCMATIC
- EAN number: 8445059009840
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Fitting Position: Rear Axle
- Diameter [mm]: 245
- Brake Disc Type: solid
- Drilled: no
- Surface: Oiled
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Product line: PREMIER
- Brake Disc Thickness [mm]: 10
- Height [mm]: 59,2
- Centering Diameter [mm]: 68
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 108
- Minimum thickness [mm]: 8
- Weight [kg]: 7,71
- Tightening Torque [Nm]: 120
- Test Mark: R90 homologated
- Packing Type: Box
- Packaging length [cm]: 24
- Packaging width [cm]: 24
- Packaging height [cm]: 11,6
- Item number: DDF128
- Manufacturer: FERODO
- EAN number: 5016687112894
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 245
- Construction Year to: 07 / 1992
- Construction Year from: 08 / 1992
- Vehicle Identification Number (VIN) to: 8CN3
- Brake Disc Type: solid
- Drilled: no
- Braking / Drive Dynamics: for vehicles with ABS
- Brake Disc Thickness [mm]: 10
- Height [mm]: 59,2
- Centering Diameter [mm]: 68
- Number of Holes: 4
- Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Wear Warning Contact: incl. wear warning contact, with integrated wear warning contact
- Item number: C4A000ABE
- Manufacturer: ABE
- EAN number: 5900427204461
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 245
- Brake Disc Type: solid
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness [mm]: 10
- Height [mm]: 59,1
- Centering Diameter [mm]: 68
- Number of Holes: 4
- Minimum thickness [mm]: 8
- Test Mark: E1 90R-02C0100 / 1592
- Item number: BG2343
- Manufacturer: DELPHI
- EAN number: 5012759423424
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 280
- Brake Disc Type: solid
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness [mm]: 13
- Height [mm]: 56,5
- Centering Diameter [mm]: 68
- Number of Holes: 4
- Minimum thickness [mm]: 11
- Test Mark: E1 90R-02C0100 / 1555
- Item number: BG2783
- Manufacturer: DELPHI
- EAN number: 5012759923801
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 280
- Vehicle Identification Number (VIN) from: 8C-P-000001
- Brake Disc Type: solid
- Drilled: no
- Transmission Type: Manual Transmission
- Height [mm]: 56
- Centering Diameter [mm]: 68
- Number of Holes: 4
- Rim Hole Number: 4
- Minimum thickness [mm]: 11
- Item number: A1391P
- Manufacturer: LPR
- EAN number: 8032532068632
- Condition: New
price incl. 19% VAT
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: solid
- Drilled: no
- Brake Disc Thickness [mm]: 12,9
- Height [mm]: 56,2
- Centering Diameter [mm]: 68,0
- Number of Holes: 4
- Production Number: 6040140
- Item number: 6040140
- Manufacturer: KRAFT
- EAN number: 5900427198524
- Condition: New
- Fitting Position: Front Axle
- Brake System: Lucas / TRW
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Thickness [mm]: 19
- Quantity Unit: Axle Set
- Height [mm]: 69,5
- Width [mm]: 119,0
- Test Mark: E9 90R-02A1251 / 4450
- MAPP code available
- Number of bolts / screws: 2
- Item number: 13.0460-2934.2
- Our price: 38,49 €
- Manufacturer: ATE
- EAN number: 4006633064231
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 245,0
- Vehicle Identification Number (VIN) to: 8C-P-050000
- Vehicle Identification Number (VIN) from: 8C-P-050001
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Braking / Drive Dynamics: for vehicles with ABS
- Brake Disc Thickness [mm]: 10,0
- Height [mm]: 59,5
- Centering Diameter [mm]: 68,0
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 108,0
- Minimum thickness [mm]: 8,0
- Inner Diameter [mm]: 135,8
- MAPP code available
- Bore Diameter [mm]: 15,4
- Item number: 24.0110-0178.1
- Manufacturer: ATE
- EAN number: 4006633055352
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: solid
- Drilled: no
- Surface: Oiled
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Product line: PREMIER
- Brake Disc Thickness [mm]: 13
- Height [mm]: 56,2
- Centering Diameter [mm]: 68
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 108
- Minimum thickness [mm]: 11
- Weight [kg]: 10,11
- Tightening Torque [Nm]: 120
- Test Mark: R90 homologated
- Packing Type: Box
- Packaging length [cm]: 24
- Packaging width [cm]: 24
- Packaging height [cm]: 11,6
- Item number: DDF318
- Manufacturer: FERODO
- EAN number: 5016687131895
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 280
- Construction Year from: 08 / 1992
- Vehicle Identification Number (VIN) from: 8CP000001
- Brake Disc Type: solid
- Drilled: no
- Machining: High-carbon
- Brake Disc Thickness [mm]: 13
- Height [mm]: 56,2
- Centering Diameter [mm]: 68
- Number of Holes: 4
- Thickness [mm]: 13
- Minimum thickness [mm]: 11
- Item number: C3A014ABE
- Manufacturer: ABE
- EAN number: 5900427198555
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 280
- Construction Year from: 08 / 1992
- Brake Disc Type: Vented
- Drilled: no
- Transmission Type: Fully Automatic
- Brake Disc Thickness [mm]: 22
- Height [mm]: 56
- Centering Diameter [mm]: 68
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 108
- Minimum thickness [mm]: 20
- Thread Size: 15,6
- Item number: C3A015ABE
- Manufacturer: ABE
- EAN number: 5900427198579
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Vehicle Identification Number (VIN) to: 8C_N_300000
- Brake Disc Type: solid
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness [mm]: 13
- Height [mm]: 56,5
- Centering Diameter [mm]: 68
- Number of Holes: 4
- Minimum thickness [mm]: 11
- Test Mark: E1 90R-02C0100 / 1590
- Item number: BG2752
- Manufacturer: DELPHI
- EAN number: 5012759923603
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Vehicle Identification Number (VIN) to: 8C-N-300000
- Brake Disc Type: solid
- Drilled: no
- Brake Disc Thickness [mm]: 13
- Height [mm]: 56
- Centering Diameter [mm]: 68
- Number of Holes: 4
- Minimum thickness [mm]: 11
- Item number: A1201P
- Manufacturer: LPR
- EAN number: 8032532068557
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 280
- Vehicle Identification Number (VIN) from: 8C-P-000001
- Brake Disc Type: internally vented
- Drilled: no
- Transmission Type: Automatic Transmission
- Height [mm]: 56
- Centering Diameter [mm]: 68
- Number of Holes: 4
- Minimum thickness [mm]: 20
- Item number: A1381V
- Manufacturer: LPR
- EAN number: 8032532068625
- Condition: New
- Fitting Position: Front Axle
- Brake System: Lucas / TRW
- Wear Warning Contact: incl. wear warning contact
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Thickness [mm]: 19
- Quantity Unit: Axle Set
- Height [mm]: 69,5
- Width [mm]: 119,0
- Test Mark: E9 90R-02A1251 / 4450
- Warning Contact Length [mm]: 198
- MAPP code available
- Number of bolts / screws: 2
- Item number: 13.0460-2925.2
- Our price: 34,99 €
- Manufacturer: ATE
- EAN number: 4006633062619
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Brake System: Lucas / TRW
- Vehicle Identification Number (VIN) from: 8C-P-050001
- Vehicle Identification Number (VIN) to: 8C-P-050000
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Braking / Drive Dynamics: for vehicles with ABS
- Thickness [mm]: 15,8
- Quantity Unit: Axle Set
- Height [mm]: 66,8
- Width [mm]: 87,6
- Test Mark: E1 90R-01075 / 075
- MAPP code available
- Number of bolts / screws: 4
- Item number: 13.0460-3602.2
- Our price: 27,99 €
- Manufacturer: ATE
- EAN number: 4006633092661
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Vehicle Identification Number (VIN) to: 8C-P-000001
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 13,0
- Height [mm]: 56,5
- Centering Diameter [mm]: 68,0
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 108,0
- Minimum thickness [mm]: 11,0
- Inner Diameter [mm]: 134,5
- MAPP code available
- Test Mark: E1 90R-02C0165 / 0630
- Bore Diameter [mm]: 15,4
- Item number: 24.0113-0166.1
- Manufacturer: ATE
- EAN number: 4006633139144
- Condition: New
price incl. 19% VAT
excl. delivery costs