• SHOP
  • CLUB
0
My Garage
Add vehicle
0
items #
0,00 €
Your basket is empty

AUDI A3 8v S3 2.0 quattro Panelling (280 hp Petrol CJXB)

2 items
  • Material: Plastic
  • Colour: yellow
  • Length [mm]: 110
  • Fitting Position: Rear Spoiler
  • Width [mm]: 100
  • Height [mm]: 50
  • Weight [g]: 0,029
  • Item number: 55657
  • Manufacturer: AIC
  • EAN number: 4046283556571
  • Condition: New
Show OEM numbers of the product
Additional information

Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use.

For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules.

If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at:

Phone: 040 - 25 30 66 55 Email: [email protected]

This often avoids extensive troubleshooting that is disproportionate to normal repair times.

The following applies to complaints: The more complete the processes are submitted, the faster they can be processed.

Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

Details
In stock (Item(s) left: 3)
-23%
compared to RRP 9,23 €

7,10 €
Price per set of 25 pieces

price incl. 19% VAT

excl. delivery costs

88570-232 Panelling Audi A3 S3 quattro 280 hp 206 kW CJXB 2014 8V1, 8VK FEBEST 88570232 Panelling AUDI A3 8v S3 2.0 quattro 280 hp Petrol 2013 price
FEBEST 88570-232 Retaining Clip, door panel
Article number: 88570-232
Submit a review
    • for PR number: K8S, L0L, L0R
    • for combined PR number: L0L,L0R
  • Item number: 88570-232
  • Our price: 2,12 €
  • Manufacturer: FEBEST
  • EAN number: 4056111195995
  • Condition: New
Show OEM numbers of the product
Details
Сurrently out of stock
2,12 €

price incl. 19% VAT

excl. delivery costs

AUDI A3 Hatchback (8V1, 8VK) S3 quattro Bestsellers
    • for PR number: 1KJ,1KY
    • Vehicle Equipment: for vehicles with electric parking brake
    • Fitting Position: Rear Axle
  • Diameter [mm]: 310
  • Brake Disc Type: Vented
  • Brake Disc Thickness [mm]: 22
  • Height [mm]: 48,5
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 20
  • Inner Diameter [mm]: 169
  • Bore Diameter [mm]: 15,3
  • Drilled: no
  • Item number: 25842
  • Manufacturer: MAPCO
  • EAN number: 4043605445797
  • Condition: New
Show OEM numbers of the product
Details
In stock
-64%
compared to RRP 107,10 €

38,02 €
Price per item

price incl. 19% VAT

excl. delivery costs

ABE C4W014ABE Brake disc Rear Axle, 310x22mm, 9x112, Vented
Article number: C4W014ABE
Submit a review
    • Vehicle Equipment: for vehicles with electric parking brake
    • for PR number: 1KY
  • Fitting Position: Rear Axle
  • Diameter [mm]: 310
  • Brake Disc Type: Vented
  • Brake Disc Thickness [mm]: 22
  • Height [mm]: 48,3
  • Centering Diameter [mm]: 65
  • Number of Holes: 9
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 20
  • Thread Size: 15,5
  • Drilled: no
  • Item number: C4W014ABE
  • Manufacturer: ABE
  • EAN number: 5900427206786
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
56,38 €
Price per item

price incl. 19% VAT

free delivery

DELPHI BG3975 Brake disc Rear Axle, 310x22mm, 5, Vented
Article number: BG3975
Submit a review
    • Fitting Position: Rear Axle
    • for PR number: 1KJ
  • Diameter [mm]: 310
  • Brake Disc Type: Vented
  • Brake Disc Thickness [mm]: 22
  • Height [mm]: 48,5
  • Surface: Oiled
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Minimum thickness [mm]: 20
  • Test Mark: E1 90R-02C0289 / 1665
  • Drilled: no
  • Item number: BG3975
  • Manufacturer: DELPHI
  • EAN number: 5012759370155
  • Condition: New
Show OEM numbers of the product
Details
In stock (Item(s) left: 6)
-43%
compared to RRP 99,36 €

55,89 €
Price per item

price incl. 19% VAT

excl. delivery costs

    • Construction Year to: 05 / 2014
    • Fitting Position: Rear Axle
    • for PR number: 1KE
  • Diameter [mm]: 272
  • Brake Disc Type: solid
  • Brake Disc Thickness [mm]: 10
  • Height [mm]: 48,3
  • Surface: Oiled
  • Centering Diameter [mm]: 65
  • Number of Holes: 9
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 8
  • fulfils ECE norm: ECE-R90
  • Bore Diameter up to [mm]: 15,3
  • Drilled: no
  • Item number: 0 986 479 677
  • Manufacturer: BOSCH
  • EAN number: 4047024749801
  • Condition: New
Show OEM numbers of the product
Details
In stock
-68%
compared to RRP 79,85 €

25,39 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Rear Axle
  • Diameter [mm]: 310
  • Brake Disc Type: Vented
  • Brake Disc Thickness [mm]: 22
  • Height [mm]: 48,4
  • Centering Diameter [mm]: 65
  • Number of Holes: 9
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 20
  • Drilled: no
  • Item number: BDC5628
  • Manufacturer: QUINTON HAZELL
  • EAN number: 5050438159059
  • Condition: New
Show OEM numbers of the product
Details
In stock
-51%
compared to RRP 110,55 €

53,27 €
Price per item

price incl. 19% VAT

excl. delivery costs

    • for PR number: 1KJ, 1KY, 1KZ
    • Vehicle Equipment: for vehicles with electric parking brake
    • Fitting Position: Rear Axle
  • Diameter [mm]: 310,0
  • Brake Disc Type: Vented
  • Brake Disc Thickness [mm]: 22,0
  • Height [mm]: 48,5
  • Surface: Coated
  • Centering Diameter [mm]: 65,0
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 112,0
  • Minimum thickness [mm]: 20,0
  • Inner Diameter [mm]: 169,0
  • Machining: High-carbon
  • MAPP code available
  • No. of holes 2: 9
  • Test Mark: E1 90R-02C0118 / 0945
  • Bore Diameter [mm]: 15,3
  • Drilled: no
  • Item number: 24.0122-0219.1
  • Manufacturer: ATE
  • EAN number: 4006633229630
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
-57%
compared to RRP 143,28 €

60,65 €
Price per item

price incl. 19% VAT

excl. delivery costs

    • for PR number: 1ZE, 1ZP
    • Fitting Position: Front Axle
  • Diameter [mm]: 288
  • Brake Disc Type: Vented
  • Brake Disc Thickness [mm]: 25,0
  • Height [mm]: 49,9
  • Surface: Coated
  • Centering Diameter [mm]: 65,0
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 112,0
  • Minimum thickness [mm]: 22,0
  • Inner Diameter [mm]: 144,0
  • Machining: High-carbon
  • MAPP code available
  • No. of holes 2: 9
  • Test Mark: E1 90R-02C0115 / 0010
  • Bore Diameter [mm]: 15,3
  • Supplementary Article / Supplementary Info Info 2: with bolts / screws
  • Drilled: no
  • Item number: 24.0125-0145.1
  • Manufacturer: ATE
  • EAN number: 4006633113472
  • Condition: New
Show OEM numbers of the product
Details
In stock
-60%
compared to RRP 126,62 €

49,98 €
Price per item

price incl. 19% VAT

excl. delivery costs

    • for PR number: 1ZA, 1ZD
    • Fitting Position: Front Axle
  • Diameter [mm]: 312,0
  • Brake Disc Type: Vented
  • Brake Disc Thickness [mm]: 25,0
  • Height [mm]: 49,9
  • Surface: Coated
  • Centering Diameter [mm]: 65,0
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 112,0
  • Minimum thickness [mm]: 22,0
  • Inner Diameter [mm]: 146,0
  • Machining: High-carbon
  • MAPP code available
  • No. of holes 2: 9
  • Test Mark: E1 90R-02C0115 / 1001
  • Bore Diameter [mm]: 15,3
  • Supplementary Article / Supplementary Info Info 2: with bolts / screws
  • Drilled: no
  • Item number: 24.0125-0158.1
  • Manufacturer: ATE
  • EAN number: 4006633209489
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
-61%
compared to RRP 156,13 €

60,04 €
Price per item

price incl. 19% VAT

excl. delivery costs

    • for PR number: 1ZE, 1ZP
    • Fitting Position: Front Axle
  • Diameter [mm]: 288
  • Brake Disc Type: Vented
  • Product line: PowerDisc
  • Brake Disc Thickness [mm]: 25,0
  • Height [mm]: 49,9
  • Surface: Coated
  • Centering Diameter [mm]: 65,0
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 112,0
  • Minimum thickness [mm]: 22,0
  • Inner Diameter [mm]: 144,0
  • Machining: High-carbon
  • MAPP code available
  • No. of holes 2: 9
  • Test Mark: E1 90R-02C0858 / 1210
  • Bore Diameter [mm]: 15,3
  • Supplementary Article / Supplementary Info Info 2: with bolts / screws
  • Drilled: no
  • Item number: 24.0325-0145.1
  • Manufacturer: ATE
  • EAN number: 4006633128186
  • Condition: New
Show OEM numbers of the product
Additional information

For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.

Details
Free delivery on this item
In stock
-57%
compared to RRP 150,65 €

63,40 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Rear Axle
  • Brake System: TRW
  • Wear Warning Contact: without integrated wear sensor
  • Construction Year to: 05 / 2014
  • Thickness [mm]: 17
  • Quantity Unit: Axle Set
  • Height [mm]: 56,1
  • Width [mm]: 105
  • WVA Number: 23914
  • Test Mark: ECE-R90
  • Weight [kg]: 1,224
  • Supplementary Article / Supplementary Info Info 2: with bolts / screws, with anti-squeak plate
  • Item number: 598752
  • Our price: 27,54 €
  • Manufacturer: VALEO
  • EAN number: 3276425987524
  • Condition: New
Show OEM numbers of the product
Additional information

1923-2023: 100 years of braking

Details
In stock
-71%
compared to RRP 95,16 €

27,54 €

price incl. 19% VAT

excl. delivery costs

    • Construction Year to: 05 / 2014
    • Fitting Position: Rear Axle
    • for PR number: 1KY, 1KJ
  • Diameter [mm]: 310
  • Brake Disc Type: Vented
  • Brake Disc Thickness [mm]: 22
  • Height [mm]: 48,5
  • Surface: Coated
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 20
  • Machining: High-carbon
  • Bore Diameter up to [mm]: 15,3
  • fulfils ECE norm: ECE-R90
  • Drilled: no
  • Item number: 0 986 479 303
  • Manufacturer: BOSCH
  • EAN number: 4047024233768
  • Condition: New
Show OEM numbers of the product
Details
In stock
-73%
compared to RRP 140,42 €

37,10 €
Price per item

price incl. 19% VAT

excl. delivery costs

    • Fitting Position: Rear Axle
    • for PR number: 1KY, 1KJ
  • Diameter [mm]: 310
  • Brake Disc Type: Externally Vented
  • Product line: COAT Z
  • Brake Disc Thickness [mm]: 22
  • Height [mm]: 49
  • Surface: Coated
  • Centering Diameter [mm]: 65
  • Rim Hole Number: 5
  • Hole Arrangement / Number: 10 / 5
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 20
  • Weight [kg]: 6,8
  • Machining: High-carbon
  • Test Mark: ECE R90 APPROVED
  • Drilled: no
  • Item number: 100.3309.20
  • Manufacturer: ZIMMERMANN
  • EAN number: 4250238718208
  • Condition: New
Show OEM numbers of the product
Details
In stock
-66%
compared to RRP 137,70 €

46,65 €
Price per item

price incl. 19% VAT

excl. delivery costs

    • Fitting Position: Rear Axle
    • for PR number: 1KY, 1KJ
  • Diameter [mm]: 310
  • Brake Disc Type: Externally Vented, Perforated
  • Product line: SPORT COAT Z
  • Brake Disc Thickness [mm]: 22
  • Height [mm]: 49
  • Surface: Coated
  • Centering Diameter [mm]: 65
  • Rim Hole Number: 5
  • Hole Arrangement / Number: 10 / 5
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 20
  • Weight [kg]: 6,8
  • Machining: High-carbon
  • Test Mark: ECE R90 APPROVED
  • Drilled: yes
  • Item number: 100.3309.52
  • Manufacturer: ZIMMERMANN
  • EAN number: 4250238749301
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
-55%
compared to RRP 196,90 €

87,47 €
Price per item

price incl. 19% VAT

excl. delivery costs

    • for PR number: 1KY
    • for PR number: 1KJ
  • Fitting Position: Rear Axle
  • Diameter [mm]: 310
  • Brake Disc Type: internally vented
  • Brake Disc Thickness [mm]: 22
  • Surface: Coated
  • Centering Diameter [mm]: 65
  • Rim Hole Number: 5
  • Bolt Hole Circle Ø [mm]: 112
  • Thickness [mm]: 48,5
  • Minimum thickness [mm]: 20
  • Weight [kg]: 7,04
  • Number of mounting bores: 1
  • Observe service information
  • Drilled: no
  • Item number: 24386
  • Manufacturer: FEBI BILSTEIN
  • EAN number: 4027816243861
  • Condition: New
Show OEM numbers of the product
Additional information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Details
In stock
-55%
compared to RRP 90,00 €

40,30 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Front Axle
  • Wear Warning Contact: incl. wear warning contact
  • Supplementary Article / Supplementary Info: with spring
  • Thickness [mm]: 20
  • Quantity Unit: Axle Set
  • Number of wear indicators [per axle]: 1
  • Length [mm]: 175,2
  • Height [mm]: 69,7
  • Supplementary Article / Supplementary Info Info 2: with adhesive film
  • Warning Contact Length [mm]: 200
  • Item number: 1470.01
  • Our price: 46,73 €
  • Manufacturer: REMSA
  • EAN number: 8427975033932
  • Condition: New
Show OEM numbers of the product
Details
In stock
46,73 €

price incl. 19% VAT

excl. delivery costs

    • for PR number: 1ZA, 1ZD
    • Fitting Position: Front Axle
  • Diameter [mm]: 312,0
  • Brake Disc Type: Vented
  • Product line: PowerDisc
  • Brake Disc Thickness [mm]: 25,0
  • Height [mm]: 49,9
  • Surface: Coated
  • Centering Diameter [mm]: 65,0
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 112,0
  • Minimum thickness [mm]: 22,0
  • Inner Diameter [mm]: 146,0
  • Machining: High-carbon
  • MAPP code available
  • No. of holes 2: 9
  • Test Mark: E1 90R-02C0858 / 1214
  • Bore Diameter [mm]: 15,3
  • Supplementary Article / Supplementary Info Info 2: with bolts / screws
  • Drilled: no
  • Item number: 24.0325-0158.1
  • Manufacturer: ATE
  • EAN number: 4006633312677
  • Condition: New
Show OEM numbers of the product
Additional information

For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.

Details
Free delivery on this item
In stock
-61%
compared to RRP 195,40 €

75,82 €
Price per item

price incl. 19% VAT

excl. delivery costs

    • Fitting Position: Rear Axle
    • for PR number: 1KE
  • Diameter [mm]: 272
  • Brake Disc Type: solid
  • Product line: COAT Z
  • Brake Disc Thickness [mm]: 10
  • Height [mm]: 48
  • Surface: Coated
  • Centering Diameter [mm]: 65
  • Rim Hole Number: 5
  • Hole Arrangement / Number: 10 / 5
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 8,0
  • Weight [kg]: 3,9
  • Test Mark: ECE R90 APPROVED
  • Drilled: no
  • Item number: 600.3241.20
  • Manufacturer: ZIMMERMANN
  • EAN number: 4250238748380
  • Condition: New
Show OEM numbers of the product
Details
In stock
-63%
compared to RRP 92,50 €

33,37 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Front Axle
  • Diameter [mm]: 288
  • Brake Disc Type: Vented
  • Brake Disc Thickness [mm]: 25
  • Height [mm]: 49,9
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 22
  • Inner Diameter [mm]: 144
  • Weight [kg]: 7,2
  • Bore Diameter [mm]: 15,3
  • for combined PR number: 1ZE+1ZP
  • Drilled: no
  • Item number: 25830
  • Manufacturer: MAPCO
  • EAN number: 4043605101709
  • Condition: New
Show OEM numbers of the product
Details
In stock
-65%
compared to RRP 124,95 €

42,64 €
Price per item

price incl. 19% VAT

excl. delivery costs

Find the best offers on