Vehicle identification number: 0708348
W124 300 E 3.0 4-matic Oil pump (188 hp Petrol M 103.983)
- Number of Teeth: 35
- Engine Timing: Timing Chain
- Weight [kg]: 0,212
- Units / Pulleys: Oil Pump
- Item number: 25040
- Our price: 76,99 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816250401
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
price incl. 19% VAT
- Length [mm]: 265
- Width [mm]: 180,0
- Height [mm]: 190
- Weight [kg]: 1,1
- Item number: V30-0341
- Our price: 161,43 €
- Manufacturer: VAICO
- EAN number: 4046001214646
- Condition: New
- Weight [kg]: 1,15
- for OE number: 103 180 12 01
- Observe service information
- Item number: 08735
- Our price: 431,99 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816087359
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Inner Diameter [mm]: 30
- Fitting Position: frontal sided
- Material: NBR (nitrile butadiene rubber)
- Dust Cover: with dust lip
- Weight [kg]: 0,0088
- Diameter [mm]: 40
- Item number: V30-2977
- Our price: 5,72 €
- Manufacturer: VAICO
- EAN number: 4046001871610
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Number of Teeth: 35
- Engine Timing: Timing Chain
- Weight [kg]: 0,212
- Units / Pulleys: Oil Pump
- Item number: 10 06 0001
- Our price: 172,60 €
- Manufacturer: SWAG
- EAN number: 4044688250407
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: Vented
- Construction Year from: 11 / 1986
- Brake Disc Thickness [mm]: 9
- Height [mm]: 53,5
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 67
- Thickness [mm]: 9
- Minimum thickness [mm]: 7,3
- Wear Warning Contact: with integrated wear warning contact
- Registration Type: with General Operating Permit (ABE)
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: C4M009ABE
- Manufacturer: ABE
- EAN number: 5900427205802
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 284
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Height [mm]: 46,5
- Surface: Oiled
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Minimum thickness [mm]: 10
- Test Mark: E1 90R-02C0100 / 0036
- Drilled: no
- Item number: BG2314
- Manufacturer: DELPHI
- EAN number: 5012759423134
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 284
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Height [mm]: 43,6
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Minimum thickness [mm]: 19,4
- Drilled: no
- Item number: BG2442
- Manufacturer: DELPHI
- EAN number: 2089259537000
- Condition: New
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Height [mm]: 59,6
- Width [mm]: 110,0
- Test Mark: ECE R-90
- Brake Disc Thickness [mm]: 19,3
- Production Number: 6001010
- Item number: 6001010
- Our price: 23,28 €
- Manufacturer: KRAFT
- EAN number: 5900427189126
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 284
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Height [mm]: 43,5
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 19,4
- Drilled: no
- Item number: BDC3445
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593166301
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 9
- Height [mm]: 55,5
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 7,3
- Drilled: no
- Item number: BDC3447
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593166288
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 11 / 1986
- Fitting Position: Front Axle
- Brake System: Lucas / TRW
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 19,3
- Quantity Unit: Axle Set
- Height [mm]: 59,6
- Width [mm]: 110,0
- Test Mark: E9 90R-02A1259 / 1261
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Article number of recommended accessories: 24.8190-0402.2
- Number of bolts / screws: 2
- Observe dimensions
- Item number: 13.0460-2927.2
- Our price: 34,43 €
- Manufacturer: ATE
- EAN number: 4006633064194
- Condition: New
-
- Construction Year from: 11 / 1986
- Fitting Position: Rear Axle
- Brake System: ATE
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 15,5
- Quantity Unit: Axle Set
- Height [mm]: 54,3
- Width [mm]: 61,8
- Test Mark: E9 90R-02A1184 / 1291
- MAPP code available
- Article number of recommended accessories: 13.0460-0186.2
- Observe dimensions
- Item number: 13.0460-4034.2
- Our price: 18,35 €
- Manufacturer: ATE
- EAN number: 4006633064279
- Condition: New
-
- Construction Year from: 11 / 1986
- Fitting Position: Front Axle
- Brake System: Lucas / TRW
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 19,3
- Product line: Ceramic
- Quantity Unit: Axle Set
- Height [mm]: 59,6
- Width [mm]: 110,0
- Test Mark: E9 90R-02A1242 / 1261
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Article number of recommended accessories: 24.8190-0402.2
- Number of bolts / screws: 2
- Observe dimensions
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-2927.2
- Our price: 45,89 €
- Manufacturer: ATE
- EAN number: 4006633339643
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 11 / 1986
- Fitting Position: Front Axle
- Diameter [mm]: 284,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22,0
- Height [mm]: 43,5
- Surface: Coated
- Centering Diameter [mm]: 67,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 19,4
- Inner Diameter [mm]: 152,0
- Machining: Alloyed / High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0118 / 0177
- Bore Diameter [mm]: 15,0
- Drilled: no
- Item number: 24.0122-0134.1
- Manufacturer: ATE
- EAN number: 4006633140263
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 9,2
- Height [mm]: 53,5
- Surface: Oiled
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Minimum thickness [mm]: 7,3
- Test Mark: E1 90R-02C0967 / 2525
- Drilled: no
- Item number: BG2291
- Manufacturer: DELPHI
- EAN number: 5012759422908
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 284
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Height [mm]: 43,4
- Surface: Oiled
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Minimum thickness [mm]: 19,4
- Test Mark: E1 90R-02C0074 / 1607
- Drilled: no
- Item number: BG2345
- Manufacturer: DELPHI
- EAN number: 5012759423448
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 11 / 1986
- Fitting Position: Rear Axle
- Diameter [mm]: 258,0
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 9,0
- Height [mm]: 55,5
- Surface: Coated
- Centering Diameter [mm]: 67,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 7,3
- Inner Diameter [mm]: 164,0
- MAPP code available
- Test Mark: E1 90R-02C0248 / 0961
- Bore Diameter [mm]: 12,8
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0109-0120.1
- Manufacturer: ATE
- EAN number: 4006633133548
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Engine Code: M 103.985
- Fitting Position: Rear Axle
- Brake System: ATE
- Material: Low-Metallic
- Thickness [mm]: 15,2
- Quantity Unit: Axle Set
- Height [mm]: 54,3
- Width [mm]: 61,8
- WVA Number: 21301
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with damping, with mounting manual
- Article number of recommended accessories: 1987474100, 1987474901, 1987474180
- Observe technical data
- Item number: 0 986 424 358
- Our price: 19,12 €
- Manufacturer: BOSCH
- EAN number: 3165143209745
- Condition: New
-
- Engine Code: M 103.985
- Fitting Position: Front Axle
- Brake System: Lucas-Girling
- Material: Low-Metallic
- Supplementary Article / Supplementary Info: with accessories
- Thickness [mm]: 18,4
- Quantity Unit: Axle Set
- Height [mm]: 59,7
- Width [mm]: 110,1
- WVA Number: 21028
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate, with bolts / screws
- Article number of recommended accessories: 1987474577
- Number of bolts / screws: 4
- Observe technical data
- Item number: 0 986 469 410
- Our price: 23,81 €
- Manufacturer: BOSCH
- EAN number: 3165141796797
- Condition: New
price incl. 19% VAT
excl. delivery costs