Vehicle identification number: 0588BVD
Audi A4 B9 Allroad 45 TFSI Mild Hybrid quattro Oil cooler gasket (265 hp Petrol/Electric DPAA)
- Goods tariff number: 8409919990
- Item number: 279.610
- Our price: 4,23 €
- Manufacturer: ELRING
- EAN number: 4041248604045
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Length [mm]: 110
- Width [mm]: 59
- Thickness [mm]: 6
- Item number: 01303400
- Our price: 9,37 €
- Manufacturer: AJUSA
- EAN number: 8433577129836
- Condition: New
- Thickness [mm]: 1,7
- Width [mm]: 5,4
- Length [mm]: 8,8
- Item number: 16532900
- Our price: 1,48 €
- Manufacturer: AJUSA
- EAN number: 8433577373093
- Condition: New
- Article number of recommended accessories: V15-60-0015
- Item number: V15-60-90015
- Our price: 5,31 €
- Manufacturer: VEMO
- EAN number: 4062375153701
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
-
- for PR number: 1LA, 1LB
- Fitting Position: Front Axle
- Diameter [mm]: 314,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25,0
- Height [mm]: 52,4
- Surface: Coated
- Centering Diameter [mm]: 68,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 23,0
- Inner Diameter [mm]: 154,0
- Machining: High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0115 / 1326
- Bore Diameter [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0125-0184.1
- Manufacturer: ATE
- EAN number: 4006633314749
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- for PR number: 2EJ
-
- for PR number: 1KJ
-
- for PR number: 1KU
-
- for PR number: 1KK
-
- for PR number: 1KF
- Fitting Position: Rear Axle
- Diameter [mm]: 330
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 22
- Surface: Coated
- Centering Diameter [mm]: 68
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Weight [kg]: 7,955
- Number of mounting bores: 1
- for OE number: 8K0 615 601 C
- Observe service information
- old version
- Drilled: no
- Item number: 36454
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816364542
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 314
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Height [mm]: 52,4
- Surface: Painted
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 23
- Machining: High-carbon
- Thread Size: 15,3
- Colour: black
- Drilled: no
- Item number: DF4866S
- Manufacturer: TRW
- EAN number: 3322937928804
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- for PR number: 1KF, 1KJ, 1KK, 2EJ, 1KU
- Fitting Position: Rear Axle
- Diameter [mm]: 330,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 21,9
- Height [mm]: 36
- Surface: Coated
- Centering Diameter [mm]: 68,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 20,0
- Inner Diameter [mm]: 147,7
- Machining: High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0115 / 0603
- Bore Diameter [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0122-0272.1
- Manufacturer: ATE
- EAN number: 4006633381420
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- for PR number: 1KF, 1KJ, 1KU, 1KK, 2EJ
- Diameter [mm]: 330
- Brake Disc Type: Vented
- Product line: COATED
- Brake Disc Thickness [mm]: 22
- Height [mm]: 36,4
- Surface: Coated
- Number of Holes: 5
- Minimum thickness [mm]: 20
- Manufacturer Restriction: TRW
- Drilled: no
- Item number: 8120 291044C
- Manufacturer: TRISCAN
- EAN number: 5710476051059
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 330
- Brake Disc Type: Vented
- for PR number: 1KF, 1KJ, 1KU, 1KK
- Brake Disc Thickness [mm]: 21,9
- Height [mm]: 36
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Inner Diameter [mm]: 147,7
- Drilled: no
- Item number: C4A032ABE
- Manufacturer: ABE
- EAN number: 5900427204720
- Condition: New
-
- Fitting Position: Rear Axle
- for PR number: 1KF, 1KJ, 1KK, 1KU, 2EJ
- paired article number: 574152J
- Diameter [mm]: 330
- Brake Disc Type: Vented
- Brake System: TRW
- Brake Disc Thickness [mm]: 22
- Height [mm]: 36,5
- Surface: Coated
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Hole Arrangement / Number: 5+1
- Minimum thickness [mm]: 20
- Weight [kg]: 15,99
- Number of mounting bores: 1
- Version: JC
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Packing Type: Box
- Packaging length [cm]: 34,5
- Packaging width [cm]: 34,5
- Packaging height [cm]: 10
- Drilled: no
- Item number: 562735JC
- Manufacturer: JURID
- EAN number: 3306437233156
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- for PR number: 1KF, 1KJ
- Diameter [mm]: 330
- Brake Disc Type: internally vented
- Product line: PRO
- Brake Disc Thickness [mm]: 22
- Height [mm]: 35,8
- Surface: Coated
- Centering Diameter [mm]: 68
- Hole Arrangement / Number: 05 / 06
- Wheel Bolt Bore Diameter [mm]: 15,4
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Inner Diameter [mm]: 143,2
- Weight [kg]: 7,6
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 35,8
- Packaging width [cm]: 35,8
- Packaging height [cm]: 10,5
- Drilled: no
- Item number: 92238303
- Manufacturer: TEXTAR
- EAN number: 4019722438493
- Condition: New
-
- Fitting Position: Rear Axle
- for PR number: 1KF, 1KJ, 1KK, 1KU
- Diameter [mm]: 330
- Brake Disc Type: Vented
- Product line: COATED
- Brake Disc Thickness [mm]: 22
- Height [mm]: 35,8
- Surface: Coated
- Centering Diameter [mm]: 68
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Hub Diameter [mm]: 162
- Weight [kg]: 7,82
- Drilled: no
- Item number: 18196
- Manufacturer: A.B.S.
- EAN number: 8717109528107
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- for combined PR number: 1LA+1LB
- Fitting Position: Front Axle
- Diameter [mm]: 314,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25,0
- Height [mm]: 52,2
- Surface: Painted
- Centering Diameter [mm]: 68,0
- Number of Holes: 5
- Test Mark: ECE-R90, ECE R90 APPROVED
- Drilled: no
- Item number: 800-917C
- Manufacturer: CIFAM
- EAN number: 2210324417730
- Condition: New
price incl. 19% VAT
-
- Construction Year to: 01 / 2025
- Fitting Position: Rear Axle
- for PR number: 1KF, 1KJ, 1KK, 1KU, 2EJ
- Diameter [mm]: 330
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Height [mm]: 36,2
- Surface: Coated
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Machining: High-carbon
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 15,1
- Drilled: no
- Item number: 0 986 479 750
- Manufacturer: BOSCH
- EAN number: 4047024887084
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 330
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Height [mm]: 36,4
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Drilled: no
- Item number: BDC5712
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438159899
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- for PR number: 1KF, 1KJ, 1KU, 1KK
- Diameter [mm]: 330
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Height [mm]: 37,9
- Surface: Oiled
- Centering Diameter [mm]: 67,9
- Rim Hole Number: 5
- Minimum thickness [mm]: 20
- Net weight [kg]: 7,82
- Drilled: no
- Item number: 2047156
- Manufacturer: NK
- EAN number: 5703858756819
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- for PR number: 1KF, 1KJ, 1KU, 1KK
- Diameter [mm]: 330
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Height [mm]: 37,9
- Surface: Coated
- Centering Diameter [mm]: 67,9
- Rim Hole Number: 5
- Minimum thickness [mm]: 20
- Net weight [kg]: 7,82
- Drilled: no
- Item number: 3147156
- Manufacturer: NK
- EAN number: 5703858757496
- Condition: New
price incl. 19% VAT
-
- Fitting Position: Rear Axle
- for PR number: 1KF, 1KJ, 1KK, 2EJ, 1KU
- Diameter [mm]: 330
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Height [mm]: 36,2
- Surface: Painted
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Colour: black
- Test Mark: E190R-02C0176 / 0577
- Drilled: no
- Item number: DF6175S
- Manufacturer: TRW
- EAN number: 3322938162634
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 330
- Brake Disc Type: Vented
- Supplementary Info: Original VAICO Quality
- for PR number: 1KF, 1KJ, 1KK, 2EJ, 1KU
- Brake Disc Thickness [mm]: 21,9
- Height [mm]: 36
- Centering Diameter [mm]: 68
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Brake Disc Hub Height [mm]: 14,1
- Packaging width [cm]: 34
- Packaging height [cm]: 8
- Packaging Depth [cm]: 34
- Drilled: no
- Item number: V10-80112
- Manufacturer: VAICO
- EAN number: 4046001621987
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.