It is necessary to choose your car model, otherwise you risk buying an item that does not fit. Please note that our search function only provides results relevant to a certain vehicle type.
Trailing arm / suspension arm bush, Suspension arm, Ball joint 5450090J00
All spare parts in the list below are equivalent to OEM number 54500 90J00:
- 54500 90J00 (original number of NISSAN)
- 54500 90J00 (original number of INFINITI)
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Cone Size [mm]: 15
- Length [mm]: 378
- paired article number: 210398
- Thread Size: M14X1,5 RHT
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 4,151
- as standard
- Item number: 210397
- Manufacturer: A.B.S.
- EAN number: 8717109313734
- Condition: New
- Reference number OEM: 5450090J00
Important: Observe Fitting Instructions
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Right, Lower
- paired article number: A38-9564
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 36
- Packaging height [cm]: 10,5
- Packaging Depth [cm]: 43
- Item number: A38-9553
- Manufacturer: ACKOJA
- EAN number: 4062375038329
- Condition: New
- Reference number OEM: 5450090J00
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Right, Lower
- paired article number: 12960
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 4,4
- Supplementary Article / Supplementary Info: with rubber mounts
- Observe service information
- Item number: 12959
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816129592
- Condition: New
- Reference number OEM: 5450090J00
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.

- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Right, Lower
- paired article number: 82 73 0004
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 4,4
- Supplementary Article / Supplementary Info: with rubber mounts
- Item number: 82 73 0003
- Manufacturer: SWAG
- EAN number: 4044688512642
- Condition: New
- Reference number OEM: 5450090J00
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Right Front, Right
- Item number: 503-13080
- Manufacturer: IAP QUALITY PARTS
- EAN number: 226359146898181468981
- Condition: New
- Reference number OEM: 5450090J00
- Diameter [mm]: 55
- Overall Height [mm]: 86
- External Thread 1 [mm]: 14 x 1,5
- Inner Diameter [mm]: 18
- Fitted Diameter [mm]: 15
- Item number: BS-102R
- Manufacturer: JAPANPARTS
- EAN number: 8033001848786
- Condition: New
- Reference number OEM: 5450090J00
- Supplementary Info: ORIGINAL Quality
- Fitting Position: Lower, Front Axle Left, Front Axle Right
- Thread Size: M14x1,5
- Supplementary Article / Supplementary Info: with accessories
- Diameter [mm]: 38
- Required quantity: 2
- Height [mm]: 50
- replacement in pairs recommended
- Item number: 36-16 010 0006
- Manufacturer: MEYLE
- EAN number: 4040074113172
- Condition: New
- Reference number OEM: 5450090J00
With mounting materials, to fit most models. Please check fit accuracy before installation.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Item number: 4040300100
- Manufacturer: JP GROUP
- EAN number: 5710412571252
- Condition: New
- Reference number OEM: 5450090J00
- Fitting Position: Lower Front Axle
- Weight [kg]: 0,33
- Packaging length [cm]: 8,6
- Packaging width [cm]: 4,5
- Packaging height [cm]: 4,5
- Item number: 0220-W11
- Manufacturer: FEBEST
- EAN number: 4056111024219
- Condition: New
- Reference number OEM: 5450090J00
- Fitting Position: Lower Front Axle, Lower, Front axle both sides
- for OE number: 54570-50J00
- Item number: 514411
- Manufacturer: GSP
- EAN number: 2237398597440
- Condition: New
- Reference number OEM: 5450090J00

- Fitting Position: Rear, Front Axle Right, Front Axle Left
- Supplementary Info: ORIGINAL Quality
- Inner Diameter [mm]: 20
- Item number: 36-14 610 0003
- Manufacturer: MEYLE
- EAN number: 4040074001073
- Condition: New
- Reference number OEM: 5450090J00

- Control / Trailing Arm Type: Control Arm
- Supplementary Info: QH
- Fitting Position: Front Axle Right, Lower
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Item number: 4040101189
- Manufacturer: JP GROUP
- EAN number: 5710412373474
- Condition: New
- Reference number OEM: 5450090J00
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle, Right
- Item number: FL551-G
- Manufacturer: FLENNOR
- EAN number: 4030434121985
- Condition: New
- Reference number OEM: 5450090J00

- Control / Trailing Arm Type: Control Arm
- paired article number: QSA1547S
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Item number: QSA1546S
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593629769
- Condition: New
- Reference number OEM: 5450090J00
- Control / Trailing Arm Type: Control Arm
- paired article number: 8500 14508
- Item number: 8500 14507
- Manufacturer: TRISCAN
- EAN number: 5709147328705
- Condition: New
- Reference number OEM: 5450090J00

- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right
- Item number: J31020YMT
- Manufacturer: YAMATO
- EAN number: 5901170600333
- Condition: New
- Reference number OEM: 5450090J00

- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Supplementary Article / Supplementary Info: with bush
- Section: Lower Section
- Quality: WP
- Item number: 1666362
- Manufacturer: KLOKKERHOLM
- EAN number: 2278906441700
- Condition: New
- Reference number OEM: 5450090J00
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- paired article number: J4901004
- Article number of the recommended special tool: J9420000
- Item number: J4911004
- Manufacturer: HERTH+BUSS JAKOPARTS
- EAN number: 4029416137489
- Condition: New
- Reference number OEM: 5450090J00

- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Supplementary Info: Original VAICO Quality
- Fitting Position: Lower, Front Axle Right
- paired article number: V38-9564
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 3
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 36
- Packaging height [cm]: 10,5
- Packaging Depth [cm]: 43
- Item number: V38-9553
- Manufacturer: VAICO
- EAN number: 4046001408090
- Condition: New
- Reference number OEM: 5450090J00
Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.

- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Right, Lower
- paired article number: ADN18653
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 4,4
- Supplementary Article / Supplementary Info: with rubber mounts
- External Thread Size: M14 x 1,5
- Item number: ADN18652
- Manufacturer: BLUE PRINT
- EAN number: 5050063186529
- Condition: New
- Reference number OEM: 5450090J00
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.

- Diameter [mm]: 55
- Overall Height [mm]: 86
- External Thread 1 [mm]: 14 x 1,5
- Inner Diameter [mm]: 18
- Fitted Diameter [mm]: 15
- Item number: 72102R
- Manufacturer: JAPKO
- EAN number: 8033001848809
- Condition: New
- Reference number OEM: 5450090J00

- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right
- paired article number: 0793549
- Item number: 0783549
- Manufacturer: OCAP
- EAN number: 2219886924980
- Condition: New
- Reference number OEM: 5450090J00

- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right, Lower
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Item number: 4040101180
- Manufacturer: JP GROUP
- EAN number: 5710412563189
- Condition: New
- Reference number OEM: 5450090J00

- Control / Trailing Arm Type: Control Arm
- paired article number: 5012205
- Net weight [kg]: 4,24
- Item number: 5012206
- Manufacturer: NK
- EAN number: 5703858458614
- Condition: New
- Reference number OEM: 5450090J00

- Control / Trailing Arm Type: Control Arm
- paired article number: SCA-6510
- Item number: SCA-6509
- Manufacturer: KAVO PARTS
- EAN number: 8715616027199
- Condition: New
- Reference number OEM: 5450090J00
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Right, Lower
- Length [mm]: 450
- Height [mm]: 90
- paired article number: TC776
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Width [mm]: 430
- Item number: TC777
- Manufacturer: DELPHI
- EAN number: 5012759091784
- Condition: New
- Reference number OEM: 5450090J00
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 55
- Overall Height [mm]: 86
- External Thread 1 [mm]: 14 x 1,5
- Inner Diameter [mm]: 18
- Fitted Diameter [mm]: 15
- Item number: 72-01-102R
- Manufacturer: ASHIKA
- EAN number: 8033001848793
- Condition: New
- Reference number OEM: 5450090J00

- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right
- paired article number: 49397479
- Item number: 49397478
- Manufacturer: CORTECO
- EAN number: 3358960619037
- Condition: New
- Reference number OEM: 5450090J00
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 15
- Fitting Position: Front Axle Right, Lower
- Length [mm]: 378
- paired article number: 79455AL
- Thread Size: M14 x 1,5
- Inner Diameter [mm]: 18
- Item number: 79454AL
- Manufacturer: ALTE AUTOMOTIVE
- EAN number: 225627220954142209541
- Condition: New
- Reference number OEM: 5450090J00
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right, Lower
- Required quantity: 1
- Item number: 776415
- Manufacturer: TRICLO
- EAN number: 224970102061421020614
- Condition: New
- Reference number OEM: 5450090J00
- 1
- 2