It is necessary to choose your car model, otherwise you risk buying an item that does not fit. Please note that our search function only provides results relevant to a certain vehicle type.
Bearing bush, Stabiliser, Axle bush, Repair kit, Stabilizer suspension 3143260481
An OEM number is a unique code containing letters and digits.
Car manufacturers use them to mark every part inside their cars.
A non-original car part carrying an OEM number demonstrates that the part meets stringent car manufacturer standards and its parameters and technical specifications are identical to original equipment.
All spare parts in the list below are equivalent to OEM number 3.143.260.481:
- 3.143.260.481 (original number of MERCEDES-BENZ)
- 3.143.260.481 (original number of ALFA ROMEO)
- 3.143.260.481 (original number of AUDI)
- 3.143.260.481 (original number of BMW)
- 3.143.260.481 (original number of CHRYSLER)
- 3.143.260.481 (original number of CITROËN)
- 3.143.260.481 (original number of DAIHATSU)
- 3.143.260.481 (original number of FIAT)
- 3.143.260.481 (original number of FORD)
- 3.143.260.481 (original number of HONDA)
- 3.143.260.481 (original number of MAZDA)
- 3.143.260.481 (original number of MG)
- 3.143.260.481 (original number of MITSUBISHI)
- 3.143.260.481 (original number of MORRIS)
- 3.143.260.481 (original number of NISSAN)
- 3.143.260.481 (original number of OPEL)
- 3.143.260.481 (original number of PEUGEOT)
- 3.143.260.481 (original number of PORSCHE)
- 3.143.260.481 (original number of RENAULT)
- 3.143.260.481 (original number of ROVER)
- 3.143.260.481 (original number of SAAB)
- 3.143.260.481 (original number of SEAT)
- 3.143.260.481 (original number of SKODA)
- 3.143.260.481 (original number of SUBARU)
- 3.143.260.481 (original number of SUZUKI)
- 3.143.260.481 (original number of TOYOTA)
- 3.143.260.481 (original number of VOLVO)
- 3.143.260.481 (original number of VW)
- 3.143.260.481 (original number of CHEVROLET)
- 3.143.260.481 (original number of SSANGYONG)
- 3.143.260.481 (original number of HYUNDAI)
- 3.143.260.481 (original number of KIA)
- 3.143.260.481 (original number of LAMBORGHINI)
- 3.143.260.481 (original number of PROTON)
- 3.143.260.481 (original number of BUICK)
- 3.143.260.481 (original number of CADILLAC)
- 3.143.260.481 (original number of LEXUS)
- 3.143.260.481 (original number of ASTON MARTIN)
- 3.143.260.481 (original number of WESTFIELD)
- 3.143.260.481 (original number of MINELLI)
- 3.143.260.481 (original number of INFINITI)
31 items
Bearing Bush, stabiliser DT Spare Parts 3.143.260.481Front axle both sides
Article number: 4.80416
Submit a review
- Fitting Position: Front axle both sides
- for OE number: 309 320 0073
- Height [mm]: 30
- Inner Diameter [mm]: 12
- Diameter [mm]: 30
- Net Weight [g]: 40,5
- Item number: 4.80416
- Manufacturer: DT Spare Parts
- EAN number: 4047755211967
- Condition: New
- Reference number OEM: 3143260481
Show OEM numbers of the product
Details
Bearing Bush, stabiliser LEMA 3.143.260.481Front axle both sides
Article number: 1081.06
Submit a review
- Fitting Position: Front axle both sides
- Weight [g]: 46
- Inner Diameter [mm]: 12
- Diameter [mm]: 28,5
- Height [mm]: 31,5
- Item number: 1081.06
- Manufacturer: LEMA
- EAN number: 431033
- Condition: New
- Reference number OEM: 3143260481
Show OEM numbers of the product
Details
Bearing Bush, stabiliser MPBS 3.143.260.481Rear Axle both sides, 80 Sha
Article number: 38074121-00/80SHA
Submit a review
- Fitting Position: Rear Axle both sides
- Material: PU (Polyurethane)
- Height [mm]: 30
- Inner Diameter [mm]: 12
- Diameter [mm]: 30
- Supplementary Info: 80 Sha
- Item number: 38074121-00/80SHA
- Manufacturer: MPBS
- EAN number: 5904815809818
- Condition: New
- Reference number OEM: 3143260481
Show OEM numbers of the product
Details
Repair Kit, stabilizer suspension FEBI BILSTEIN 3.143.260.481Front Axle
Article number: 04084
Submit a review
- Fitting Position: Front Axle
- Weight [kg]: 0,225
- Observe service information
- Item number: 04084
- Our price: 15,42 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816040842
- Condition: New
- Reference number OEM: 3143260481
Show OEM numbers of the product
Contents of the Repair Kit, stabilizer suspension FEBI BILSTEIN set:
Description of the product
Units
Article number
Additional information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Details
In stock (Item(s) left: 6)
-46%
compared to
RRP 28,84 €
15,42 €
price incl. 19% VAT
excl. delivery costs
Anti roll bar bush FEBI BILSTEIN 3.143.260.481Front Axle, Rear Axle, Elastomer, 12 mm x 30 mm
Article number: 05657
Reviews - 1
- Fitting Position: Front Axle, Rear Axle
- Inner Diameter [mm]: 12
- Material: Elastomer
- Length [mm]: 30
- Diameter [mm]: 30
- Observe service information
- for OE number: 309 320 00 73
- Weight [kg]: 0,045
- Item number: 05657
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816056577
- Condition: New
- Reference number OEM: 3143260481
Show OEM numbers of the product
Additional information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Details
Anti roll bar bush FEBI BILSTEIN 3.143.260.481Rear Axle Left, Rear Axle Right, PU (Polyurethane), 18 mm x 36 mm x 36 mm
Article number: 103398
Submit a review
- Fitting Position: Rear Axle Left, Rear Axle Right
- Inner Diameter [mm]: 18
- Material: PU (Polyurethane)
- Length [mm]: 36
- Diameter [mm]: 36
- Thickness [mm]: 15
- Width [mm]: 36
- Weight [kg]: 0,009
- Item number: 103398
- Manufacturer: FEBI BILSTEIN
- EAN number: 4054224033982
- Condition: New
- Reference number OEM: 3143260481
Show OEM numbers of the product
Additional information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Details
Anti roll bar bush PETERS ENNEPETAL 3.143.260.48112 mm x 28,5, 30 mm
Article number: 013.019-00A
Submit a review
- Inner Diameter [mm]: 12
- Length [mm]: 11, 30
- Diameter [mm]: 28,5, 30
- Weight [kg]: 0,045
- Item number: 013.019-00A
- Manufacturer: PETERS ENNEPETAL
- EAN number: 4044407042719
- Condition: New
- Reference number OEM: 3143260481
Show OEM numbers of the product
Details
Anti roll bar bush TALOSA 3.143.260.481Front, Rubber-Metal Mount x 30, 12 mm
Article number: 65-11036
Submit a review
- Fitting Position: Front
- Length [mm]: 30
- Diameter [mm]: 30, 12
- Mounting Type: Rubber-Metal Mount
- Weight [kg]: 0,05
- Item number: 65-11036
- Manufacturer: TALOSA
- EAN number: 8435457155508
- Condition: New
- Reference number OEM: 3143260481
Show OEM numbers of the product
Details
Anti roll bar bush TRUCKTEC AUTOMOTIVE 3.143.260.481Rear Axle both sides, Front axle both sides, Rubber Mount, 12 mm x 30 mm
Article number: 02.30.049
Reviews - 2
- Fitting Position: Rear Axle both sides, Front axle both sides
- Inner Diameter [mm]: 12
- Length [mm]: 30
- Diameter [mm]: 30
- Mounting Type: Rubber Mount
- for OE number: 309 320 0073
- Item number: 02.30.049
- Manufacturer: TRUCKTEC AUTOMOTIVE
- EAN number: 4038081165802
- Condition: New
- Reference number OEM: 3143260481
Show OEM numbers of the product
Details
Anti roll bar bush SWAG 3.143.260.481Front Axle, Rear Axle, Elastomer, 12 mm x 30 mm
Article number: 10 61 0020
Reviews - 2
- Fitting Position: Front Axle, Rear Axle
- Inner Diameter [mm]: 12
- Material: Elastomer
- Length [mm]: 30
- Diameter [mm]: 30
- Weight [kg]: 0,045
- Item number: 10 61 0020
- Manufacturer: SWAG
- EAN number: 4044688534385
- Condition: New
- Reference number OEM: 3143260481
Show OEM numbers of the product
Additional information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Details
Anti roll bar bush VAICO 3.143.260.481Rear Axle, Front Axle, Rubber-Metal Mount, 12 mm x 30 mm, Original VAICO Quality
Article number: V30-2992
Submit a review
- Fitting Position: Rear Axle, Front Axle
- Supplementary Info: Original VAICO Quality
- Inner Diameter [mm]: 12
- Length [mm]: 30
- Diameter [mm]: 30
- Mounting Type: Rubber-Metal Mount
- Weight [kg]: 0,045
- Control / Trailing Arm Type: not for semi-trailing arm
- Packaging width [cm]: 3
- Packaging height [cm]: 3
- Packaging Depth [cm]: 3
- Item number: V30-2992
- Manufacturer: VAICO
- EAN number: 4046001868849
- Condition: New
- Reference number OEM: 3143260481
Show OEM numbers of the product
Additional information
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Details
Anti roll bar bush SIDEM 3.143.260.481Front, 12,1 mm x 28,5 mm
Article number: 849801
Reviews - 1
- Fitting Position: Front
- Inner Diameter [mm]: 12,1
- Length [mm]: 30
- Diameter [mm]: 28,5
- Item number: 849801
- Manufacturer: SIDEM
- EAN number: 5413978173839
- Condition: New
- Reference number OEM: 3143260481
Show OEM numbers of the product
Details
Anti roll bar bush SPIDAN CHASSIS PARTS 3.143.260.481Front, 12,1 mm x 28,5 mm
Article number: 411436
Submit a review
- Fitting Position: Front
- Inner Diameter [mm]: 12,1
- Length [mm]: 30
- Diameter [mm]: 28,5
- Item number: 411436
- Manufacturer: SPIDAN CHASSIS PARTS
- EAN number: 5413978875610
- Condition: New
- Reference number OEM: 3143260481
Show OEM numbers of the product
Details
Anti roll bar bush TRUCKTEC AUTOMOTIVE 3.143.260.481Front Axle, PU (Polyurethane)
Article number: 02.30.522
Submit a review
- Fitting Position: Front Axle
- Material: PU (Polyurethane)
- for OE number: 314 326 0481
- Item number: 02.30.522
- Manufacturer: TRUCKTEC AUTOMOTIVE
- EAN number: 4038081228361
- Condition: New
- Reference number OEM: 3143260481
Show OEM numbers of the product
Details
Anti roll bar bush BSG 3.143.260.481Front
Article number: BSG 60-700-012
Submit a review
- Fitting Position: Front
- Weight [kg] 0
- Voltage [V]: 24
- Number of connectors: 8
- Control Type: Flip Switch Control
- Component Number: BSG 60-700-012
- Item number: BSG 60-700-012
- Manufacturer: BSG
- EAN number: 8719822059630
- Condition: New
- Reference number OEM: 3143260481
Show OEM numbers of the product
Details
Mounting, stabilizer coupling rod TEDGUM 3.143.260.481Rear Axle both sides, Front axle both sides, 12 mm
Article number: 00417403
Submit a review
- Fitting Position: Rear Axle both sides, Front axle both sides
- Required quantity: 8
- Material: PU (Polyurethane)
- Diameter [mm]: 28
- Inner Diameter [mm]: 12
- Shore-A hardness value, base body: 80
- Supplementary Article / Supplementary Info Info 2: with grease cap
- Item number: 00417403
- Manufacturer: TEDGUM
- EAN number: 5908229986578
- Condition: New
- Reference number OEM: 3143260481
Show OEM numbers of the product
Details
Bearing Bush, stabiliser AUGER 3.143.260.481
Article number: 51073
Submit a review
- Weight [kg]: 0,012
- Inner Diameter [mm]: 18
- Diameter [mm]: 35
- Height [mm]: 15
- Item number: 51073
- Manufacturer: AUGER
- EAN number: 4051334500427
- Condition: New
- Reference number OEM: 3143260481
Show OEM numbers of the product
Details
Sample photo only
Bearing Bush, stabiliser S-TR 3.143.260.481
Article number: STR-1203304
Submit a review
- Inner Diameter [mm]: 12
- Diameter [mm]: 31
- Length [mm]: 30
- Item number: STR-1203304
- Manufacturer: S-TR
- EAN number: 224698121277631212776
- Condition: New
- Reference number OEM: 3143260481
Show OEM numbers of the product
Details
Axle bush ORIGINAL IMPERIUM 3.143.260.481Rear, Elastomer
Article number: 31376
Submit a review
- Fitting Position: Rear
- for OE number: 402642
- Required quantity: 2
- Material: Elastomer
- Weight [g]: 315
- Inner Diameter [mm]: 12
- Diameter [mm]: 48
- Length [mm]: 75
- Item number: 31376
- Manufacturer: ORIGINAL IMPERIUM
- EAN number: 8033989115344
- Condition: New
- Reference number OEM: 3143260481
Show OEM numbers of the product
Details
Repair Kit, stabilizer suspension SWAG 3.143.260.481Front Axle
Article number: 10 61 0005
Submit a review
- Fitting Position: Front Axle
- Weight [kg]: 0,225
- Item number: 10 61 0005
- Our price: 20,48 €
- Manufacturer: SWAG
- EAN number: 4044688631817
- Condition: New
- Reference number OEM: 3143260481
Show OEM numbers of the product
Contents of the Repair Kit, stabilizer suspension SWAG set:
Description of the product
Units
Article number
Mounting, stabiliser bar
8
33 10 3983
Sleeve, stabiliser mounting
4
10 90 4079
Additional information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Details
Sample photo only
Anti roll bar bush MERTZ 3.143.260.481Front Axle Left, Front Axle Right, Rear Axle Left, Rear Axle Right, Elastomer, 12 mm x 30 mm
Article number: M-S4388
Submit a review
- Fitting Position: Front Axle Left, Front Axle Right, Rear Axle Left, Rear Axle Right
- Inner Diameter [mm]: 12
- Material: Elastomer
- Length [mm]: 30
- Diameter [mm]: 30
- Item number: M-S4388
- Manufacturer: MERTZ
- EAN number: 5902701048686
- Condition: New
- Reference number OEM: 3143260481
Show OEM numbers of the product
Details
Anti roll bar bush FEBI BILSTEIN 3.143.260.481Plastic, 18 mm x 26, 35 mm
Article number: 04078
Submit a review
- Inner Diameter [mm]: 18
- Material: Plastic
- Length [mm]: 15
- Diameter [mm]: 26, 35
- Colour: white
- Weight [kg]: 0,006
- Item number: 04078
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816040781
- Condition: New
- Reference number OEM: 3143260481
Show OEM numbers of the product
Additional information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Details
Anti roll bar bush DYS 3.143.260.481Front, Rubber-Metal Mount x 30, 12 mm
Article number: 75-25688
Submit a review
- Fitting Position: Front
- Length [mm]: 30
- Diameter [mm]: 30, 12
- Mounting Type: Rubber-Metal Mount
- Weight [kg]: 0,05
- Item number: 75-25688
- Manufacturer: DYS
- EAN number: 8435457155508
- Condition: New
- Reference number OEM: 3143260481
Show OEM numbers of the product
Details
Anti roll bar bush MAXGEAR 3.143.260.481Front, 12 mm x 30 mm
Article number: 72-1705
Submit a review
- Fitting Position: Front
- Inner Diameter [mm]: 12
- Diameter [mm]: 30
- Thickness [mm]: 30
- Item number: 72-1705
- Manufacturer: MAXGEAR
- EAN number: 5907558573107
- Condition: New
- Reference number OEM: 3143260481
Show OEM numbers of the product
Details
Anti roll bar bush MEYLE 3.143.260.481Rear Axle, Front Axle, 12,2 mm x 30,5 mm, ORIGINAL Quality
Article number: 034 032 0007
Submit a review
- Fitting Position: Rear Axle, Front Axle
- Supplementary Info: ORIGINAL Quality
- Inner Diameter [mm]: 12,2
- Diameter [mm]: 30,5
- Height [mm]: 30
- Item number: 034 032 0007
- Manufacturer: MEYLE
- EAN number: 4040074054048
- Condition: New
- Reference number OEM: 3143260481
Show OEM numbers of the product
Details
Сurrently out of stock
-61%
compared to
RRP 8,00 €
3,11 €
Price per item
price incl. 19% VAT
excl. delivery costs
Anti roll bar bush at autoteile germany 3.143.260.481Rear Axle, Front Axle x 145 mm
Article number: at11753
Submit a review
- Fitting Position: Rear Axle, Front Axle
- Length [mm]: 145
- Width [mm]: 145
- for OE number: 309 320 00 73
- Width 1 [mm]: 145
- Item number: at11753
- Manufacturer: at autoteile germany
- EAN number: 225362185902461859024
- Condition: New
- Reference number OEM: 3143260481
Show OEM numbers of the product
Additional information
Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.
Details
Anti roll bar bush GSP 3.143.260.481Rear Axle Left, Front Axle Left, Rear Axle Right, Front Axle Right
Article number: 512311
Submit a review
- Fitting Position: Rear Axle Left, Front Axle Left, Rear Axle Right, Front Axle Right
- Item number: 512311
- Manufacturer: GSP
- EAN number: 2237398556280
- Condition: New
- Reference number OEM: 3143260481
Show OEM numbers of the product
Details
Anti roll bar bush HUTCHINSON 3.143.260.481Front Axle
Article number: K590016
Submit a review
- Fitting Position: Front Axle
- Item number: K590016
- Manufacturer: HUTCHINSON
- EAN number: 2223912883585
- Condition: New
- Reference number OEM: 3143260481
Show OEM numbers of the product
Details
Anti roll bar bush HUTCHINSON 3.143.260.48112 mm
Article number: 590016
Submit a review
- Inner Diameter [mm]: 12
- Item number: 590016
- Manufacturer: HUTCHINSON
- EAN number: 2267086500100
- Condition: New
- Reference number OEM: 3143260481
Show OEM numbers of the product
Details
Stabiliser Set S-TR 3.143.260.481Front
Article number: STR-130307
Submit a review
- Fitting Position: Front
- Item number: STR-130307
- Our price: 7,72 €
- Manufacturer: S-TR
- EAN number: 22113844646938464693
- Condition: New
- Reference number OEM: 3143260481
Show OEM numbers of the product
Details
Load more
- 1
- 2
The best offers: