It is necessary to choose your car model, otherwise you risk buying an item that does not fit. Please note that our search function only provides results relevant to a certain vehicle type.
Clutch disc, Clutch kit 312500D030
All spare parts in the list below are equivalent to OEM number 31250-0D030:
- 31250-0D030 (original number of TOYOTA)
- 31250-0D030 (original number of WIESMANN)
- 31250-0D030 (original number of LEXUS)
- Hub Profile: 21,3x24-21N
- Number of Teeth: 21
- Diameter [mm]: 200
- Item number: 262C0049
- Our price: 36,25 €
- Manufacturer: RIDEX
- EAN number: 4059191731657
- Condition: New
- Reference number OEM: 312500D030
- Diameter [mm]: 200
- Number of Teeth: 21
- Weight [kg]: 0,798
- Observe service information
- Centering Diameter [mm]: 24
- Item number: ADT33176
- Our price: 30,75 €
- Manufacturer: BLUE PRINT
- EAN number: 5050063331769
- Condition: New
- Reference number OEM: 312500D030
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Diameter [mm]: 200
- Inner Diameter [mm]: 140
- Number of Teeth: 21
- Hub Profile: 24.6
- Item number: DT-123V
- Our price: 34,85 €
- Manufacturer: AISIN
- EAN number: 5411450623810
- Condition: New
- Reference number OEM: 312500D030
- Diameter [mm]: 200
- Inner Diameter [mm]: 140
- Number of Teeth: 21
- Hub Profile: 24.6
- Item number: DT-123VE
- Our price: 40,48 €
- Manufacturer: AISIN
- EAN number: 5411450678605
- Condition: New
- Reference number OEM: 312500D030
- Diameter [mm]: 200
- Inner Diameter [mm]: 140
- Centering Diameter [mm]: 24
- Number of Teeth: 21
- Hub Profile: 30
- Parameter: 200TPB
- Item number: DF-285
- Our price: 66,50 €
- Manufacturer: JAPANPARTS
- EAN number: 8033001042290
- Condition: New
- Reference number OEM: 312500D030
- Diameter [mm]: 200
- Number of Teeth: 21
- Supplementary Article / Supplementary Info: with synthetic grease
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing
- Multi-piece: three-piece
- Weight [kg]: 4,238
- Observe service information
- Item number: ADT330250
- Our price: 98,15 €
- Manufacturer: BLUE PRINT
- EAN number: 5050063010701
- Condition: New
- Reference number OEM: 312500D030
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quality: Equiv.te-Alternative
- Number of Parts [parts]: 3
- Item number: 201-17094E
- Our price: 133,16 €
- Manufacturer: IAP QUALITY PARTS
- EAN number: 226359151727131517271
- Condition: New
- Reference number OEM: 312500D030
- Diameter [mm]: 200
- Product line: BR 0222
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with clutch disc
- Item number: 620 3094 00
- Our price: 136,25 €
- Manufacturer: LuK
- EAN number: 4005108111975
- Condition: New
- Reference number OEM: 312500D030
- Diameter [mm]: 200
- Number of Teeth: 21
- Centering Diameter [mm]: 24,5
- Quality: AISIN
- Quality / Grade: PREMIUM
- Number of Parts [parts]: 3
- Item number: 201-17094
- Our price: 177,91 €
- Manufacturer: IAP QUALITY PARTS
- EAN number: 226359146878901468789
- Condition: New
- Reference number OEM: 312500D030
- Diameter [mm]: 200
- Number of Teeth: 21
- Centering Diameter [mm]: 24,7
- Quality: AISIN
- Quality / Grade: PREMIUM
- Number of Parts [parts]: 3
- Item number: 201-17003
- Our price: 205,66 €
- Manufacturer: IAP QUALITY PARTS
- EAN number: 226359146878361468783
- Condition: New
- Reference number OEM: 312500D030
- Diameter [mm]: 201
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with clutch disc
- Item number: 620 3448 00
- Our price: 217,26 €
- Manufacturer: LuK
- EAN number: 4014870525736
- Condition: New
- Reference number OEM: 312500D030
- New Part
- Diameter [mm]: 200
- Inner Diameter [mm]: 140
- Hub Profile: 23,8
- Number of Teeth: 21
- Weight [kg]: 0,958
- Item number: 803559
- Our price: 31,11 €
- Manufacturer: VALEO
- EAN number: 3276428035598
- Condition: New
- Reference number OEM: 312500D030
- Diameter [mm]: 200
- Inner Diameter [mm]: 140
- Centering Diameter [mm]: 24
- Number of Teeth: 21
- Hub Profile: 30
- Parameter: 200TPB
- Item number: 80285
- Our price: 39,95 €
- Manufacturer: JAPKO
- EAN number: 8033001619355
- Condition: New
- Reference number OEM: 312500D030
- Diameter [mm]: 200
- Inner Diameter [mm]: 140
- Centering Diameter [mm]: 24
- Number of Teeth: 21
- Hub Profile: 30
- Parameter: 200TPB
- Item number: 80-02-285
- Our price: 48,94 €
- Manufacturer: ASHIKA
- EAN number: 8033001042290
- Condition: New
- Reference number OEM: 312500D030
- Number of Teeth: 21
- Inner Diameter [mm]: 140
- Diameter [mm]: 200
- Item number: TYD310
- Our price: 83,48 €
- Manufacturer: EXEDY
- EAN number: 5900427238053
- Condition: New
- Reference number OEM: 312500D030
- Parameter: 200TB
- Diameter [mm]: 200
- Hub Profile: 21,3x24-21N
- Number of Teeth: 21
- Item number: 1862 472 031
- Our price: 93,03 €
- Manufacturer: SACHS
- EAN number: 4013872178612
- Condition: New
- Reference number OEM: 312500D030
- Diameter [mm]: 200
- Number of Teeth: 21
- Technical Information Number: TSFA
- Item number: 320 0344 10
- Our price: 104,40 €
- Manufacturer: LuK
- EAN number: 4005108239464
- Condition: New
- Reference number OEM: 312500D030
- Hub Profile: 21,3x24-21N
- Number of Teeth: 21
- Parameter: 200B
- Diameter [mm]: 200
- Clutch Type: Rigid clutch disc with organic surfaces
- Product line: Performance
- Item number: 881864 99M104
- Our price: 154,15 €
- Manufacturer: SACHS PERFORMANCE
- EAN number: 4050451001015
- Condition: New
- Reference number OEM: 312500D030
A reinforced clutch cover has fundamental advantages against Performance clutch disc differences to OE: higher Rigid disk with organic linings an OE clutch cover, such as a higher transmittable torque transmittable torque, higher burst number of revolutions, and higher resistance against thrust. It also allows for start performance similar to OE, effortless exchange with OE clutches. faster and sportier gearshifts. That makes it extremely Typical applications include: application field of dual mass useful for street tuning, endurance races, hill climbing (group N) and for vehicles that are often driven with their flywheels, chip tuning, turbocharger and supercharger maximum gross vehicle weight (construction-site vehicles, modifications, towing trailers, commercial vehicle, ambulances, courier services such as UPS, TNT; DHL, etc.). snowremoval vehicle, passenger car: emergency service, Both rigid and torsion damper clutch discs are available. driving school, taxi, vehicles with maximum gross vehicle Clutch discs with torsion springs function as a vibration weight and according to high load (construction-site damper between engine and gearbox. vehicles, towing service, campers, ambulance cars, etc.), 1/4 mile-race, race circuit (endurance race, clubsport, Due to reinforced clutch components the pedal force can autocross), hill climbing (e.g. group N), rally, slalom, increase and the modulation range can be reduced. Additional clutch and gear noises can appear. drift racing
- Hub Profile: 21,3x24-21N
- Number of Teeth: 21
- Parameter: 200S
- Diameter [mm]: 200
- Clutch Type: rigid sintered disc
- Product line: Performance
- Item number: 881864 99M103
- Our price: 159,71 €
- Manufacturer: SACHS PERFORMANCE
- EAN number: 4050451001022
- Condition: New
- Reference number OEM: 312500D030
A reinforced clutch cover has fundamental advantages against Performance clutch disc differences to OE: higher thermal Rigid, sintered disk an OE clutch cover, such as a higher transmittable torque capacity compared to organic friction material, higher and higher resistance against thrust. It also allows for transmittable torque compared to organic friction material, faster and sportier gearshifts. That makes it extremely very dirt resistant, aggressive start performance, effortless exchange with OE clutches. useful for street tuning, endurance races, hill climbing (group N) and for vehicles that are often driven with their Typical applications include: race circuit (endurance race, clubsport, autocross), hill climbing (e.g. group N), rally, maximum gross vehicle weight (construction-site vehicles, ambulances, courier services such as UPS, TNT; DHL, etc.). slalom, drift racing, 1/4 mile-race Both rigid and torsion damper clutch discs are available. Clutch discs with torsion springs function as a vibration damper between engine and gearbox. Due to reinforced clutch components the pedal force can increase and the modulation range can be reduced. Additional clutch and gear noises can appear.
- Parameter: 200TPB
- Diameter [mm]: 200
- Hub Profile: 21,3x24,7-21N
- Number of Teeth: 21
- Item number: 1878 634 264
- Our price: 167,03 €
- Manufacturer: SACHS
- EAN number: 4059923039921
- Condition: New
- Reference number OEM: 312500D030
- Parameter: 200TPB
- Diameter [mm]: 200
- Hub Profile: 21,3x24,7-21N
- Number of Teeth: 21
- Item number: 1878 005 789
- Our price: 259,04 €
- Manufacturer: SACHS
- EAN number: 4013872798261
- Condition: New
- Reference number OEM: 312500D030
- Hub Profile: 21,3x24-21N
- Number of Teeth: 21
- Parameter: 200S
- Diameter [mm]: 200
- Clutch Type: rigid sintered disc
- Product line: Performance
- Item number: 881864 002623
- Our price: 752,32 €
- Manufacturer: SACHS PERFORMANCE
- EAN number: 4013872857685
- Condition: New
- Reference number OEM: 312500D030
A reinforced clutch cover has fundamental advantages against Performance clutch disc differences to OE: higher thermal Rigid, sintered disk an OE clutch cover, such as a higher transmittable torque capacity compared to organic friction material, higher and higher resistance against thrust. It also allows for transmittable torque compared to organic friction material, faster and sportier gearshifts. That makes it extremely very dirt resistant, aggressive start performance, effortless exchange with OE clutches. useful for street tuning, endurance races, hill climbing (group N) and for vehicles that are often driven with their Typical applications include: race circuit (endurance race, clubsport, autocross), hill climbing (e.g. group N), rally, maximum gross vehicle weight (construction-site vehicles, ambulances, courier services such as UPS, TNT; DHL, etc.). slalom, drift racing, 1/4 mile-race Both rigid and torsion damper clutch discs are available. Clutch discs with torsion springs function as a vibration damper between engine and gearbox. Due to reinforced clutch components the pedal force can increase and the modulation range can be reduced. Additional clutch and gear noises can appear.
- Supplementary Info: QH
- Diameter [mm]: 200
- Number of Teeth: 21
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing
- Item number: 4830402119
- Our price: 175,46 €
- Manufacturer: JP GROUP
- EAN number: 5710412489250
- Condition: New
- Reference number OEM: 312500D030
- Diameter [mm]: 200
- Number of Teeth: 21
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing
- Item number: 4830402110
- Our price: 325,72 €
- Manufacturer: JP GROUP
- EAN number: 5710412538293
- Condition: New
- Reference number OEM: 312500D030