VW Passat B8 3G Saloon 2.0 TDI 4motion Wiper motor (200 hp Diesel DTUA)
- Fitting Position: Front
- Voltage [V]: 12
- Left- / right-hand drive vehicles: for left-hand drive vehicles
- Quality: EQ (Equivalente)
- Item number: 064380000010
- Our price: 88,04 €
- Manufacturer: MAGNETI MARELLI
- EAN number: 8050947115536
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear
- Voltage [V]: 12
- Construction Year from: 10 / 2020
- Left- / right-hand drive vehicles: for left-hand drive vehicles
- Quality: EQ (Equivalente)
- Item number: 064070400010
- Our price: 93,43 €
- Manufacturer: MAGNETI MARELLI
- EAN number: 8050947113594
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear
- Voltage [V]: 12
- Left- / right-hand drive vehicles: for left-hand / right-hand drive vehicles
- Number of pins: 4
- Item number: 59697
- Our price: 106,30 €
- Manufacturer: AIC
- EAN number: 4046283596973
- Condition: New
Before installing the wiper arm, connect the wiper motor and Our products are usually delivered without installation instructions. Installation may only be carried out by switch on the ignition so that the motor runs into the park position. trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use.
For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules.
If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at:
Phone: 040 - 25 30 66 55 Email: [email protected]
This often avoids extensive troubleshooting that is disproportionate to normal repair times.
The following applies to complaints: The more complete the processes are submitted, the faster they can be processed.
Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear
- Voltage [V]: 12
- Item number: DRL851V
- Our price: 194,55 €
- Manufacturer: AD KÜHNER
- EAN number: 8056224215555
- Condition: New
- Diameter [mm]: 312
- Brake Disc Type: Vented
- for PR number: 1ZA, 1ZD, 1ZK, 1ZL
- Brake Disc Thickness [mm]: 25,0
- Fitting Position: Front Axle
- Height [mm]: 49,9
- Surface: Coated
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Inner Diameter [mm]: 146
- Machining: High-carbon
- No. of holes 2: 9
- Bore Diameter [mm]: 15,3
- Drilled: no
- Item number: C3W039ABE
- Manufacturer: ABE
- EAN number: 5901655214055
- Condition: New
- Diameter [mm]: 312
- Brake Disc Type: Vented
- Supplementary Info: ORIGINAL Quality
- for PR number: 1ZA, 1ZD, 1ZK, 1ZL
- Brake Disc Thickness [mm]: 25
- Fitting Position: Front Axle
- Height [mm]: 49,9
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Required quantity: 2
- Drilled: no
- Item number: 115 521 1094
- Manufacturer: MEYLE
- EAN number: 4040074429006
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 312
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Fitting Position: Front Axle
- Height [mm]: 50
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Drilled: no
- Item number: BDC5416
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438069259
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- for PR number: 1KZ
- Fitting Position: Rear Axle
- Diameter [mm]: 310,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22,0
- Height [mm]: 48,5
- Surface: Coated
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 20,0
- Inner Diameter [mm]: 169,0
- Machining: High-carbon
- MAPP code available
- No. of holes 2: 9
- Test Mark: E1 90R-02C0118 / 0945
- Bore Diameter [mm]: 15,3
- Drilled: no
- Item number: 24.0122-0219.1
- Manufacturer: ATE
- EAN number: 4006633229630
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- for PR number: 1ZA, 1ZC, 1ZD, 1ZG, 1ZK, 1ZL
- Fitting Position: Front Axle
- Diameter [mm]: 312,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25,0
- Height [mm]: 49,9
- Surface: Coated
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 22,0
- Inner Diameter [mm]: 146,0
- Machining: High-carbon
- MAPP code available
- No. of holes 2: 9
- Test Mark: E1 90R-02C0115 / 1001
- Bore Diameter [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0125-0158.1
- Manufacturer: ATE
- EAN number: 4006633209489
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Vehicle Identification Number (VIN) from: A3-JC000 001
- Country Specific Design: USA
- Diameter [mm]: 272
- Brake Disc Type: solid
- Product line: COAT Z
- Brake Disc Thickness [mm]: 10
- Height [mm]: 48
- Surface: Coated
- Centering Diameter [mm]: 65
- Rim Hole Number: 5
- Hole Arrangement / Number: 10 / 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 8,0
- Weight [kg]: 3,9
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Item number: 600.3241.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238748380
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- for PR number: 1ZA, 1ZD, 1ZK, 1ZL
- Diameter [mm]: 312
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Height [mm]: 49,9
- Surface: Oiled
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 22
- Test Mark: E1 90R-02C0277 / 1198
- Drilled: no
- Item number: BG3953
- Manufacturer: DELPHI
- EAN number: 5012759360545
- Condition: New
-
- for PR number: 1ZA, 1ZC, 1ZD, 1ZG, 1ZK, 1ZL
- Fitting Position: Front Axle
- Diameter [mm]: 312,0
- Brake Disc Type: Vented
- Product line: PowerDisc
- Brake Disc Thickness [mm]: 25,0
- Height [mm]: 49,9
- Surface: Coated
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 22,0
- Inner Diameter [mm]: 146,0
- Machining: High-carbon
- MAPP code available
- No. of holes 2: 9
- Test Mark: E1 90R-02C0858 / 1214
- Bore Diameter [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0325-0158.1
- Manufacturer: ATE
- EAN number: 4006633312677
- Condition: New
For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 05 / 2023
- Fitting Position: Front Axle
- for PR number: 1ZA, 1ZC, 1ZD, 1ZG, 1ZK, 1ZL, 1ZN, 1ZM
- Diameter [mm]: 312
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Height [mm]: 49,7
- Surface: Coated
- Centering Diameter [mm]: 65
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 15,4
- Drilled: no
- Item number: 0 986 479 058
- Manufacturer: BOSCH
- EAN number: 4047026223934
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 05 / 2023
- Fitting Position: Rear Axle
- for PR number: 1KZ, 2ER, 2EV
- Diameter [mm]: 310
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48,5
- Surface: Coated
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Machining: High-carbon
- Bore Diameter up to [mm]: 15,3
- fulfils ECE norm: ECE-R90
- Drilled: no
- Item number: 0 986 479 303
- Manufacturer: BOSCH
- EAN number: 4047024233768
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- for PR number: 1ZA, 1ZC, 1ZD, 1ZG, 1ZK, 1ZL
- paired article number: FDB4433
- Diameter [mm]: 312
- Brake Disc Type: Vented
- Product line: PREMIER
- Brake Disc Thickness [mm]: 25
- Height [mm]: 50
- Surface: Oiled
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 23
- Weight [kg]: 8,94
- Tightening Torque [Nm]: 120
- Test Mark: R90 homologated
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Packing Type: Box
- Packaging length [cm]: 31,3
- Packaging width [cm]: 31,3
- Packaging height [cm]: 10,4
- Drilled: no
- Item number: DDF1305
- Manufacturer: FERODO
- EAN number: 4044197335183
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- for PR number: 1ZA, 1ZD, 1ZL, 1ZK
- Diameter [mm]: 312
- Brake Disc Type: internally vented
- Product line: COATED DISC LINE
- Brake Disc Thickness [mm]: 25
- Height [mm]: 50
- Surface: Coated
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 22
- Tightening Torque [Nm]: 120
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 09.9772.11
- Manufacturer: BREMBO
- EAN number: 8020584018286
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Vehicle Identification Number (VIN) from: A3-JC000 001, 3C-J-000 001
- for PR number: 1ZA, 1ZD, 1ZK, 1ZL, 1ZC, 1ZG, 1ZM, 1ZN
- Diameter [mm]: 312
- Brake Disc Type: internally vented
- Product line: COAT Z
- Brake Disc Thickness [mm]: 25
- Height [mm]: 50
- Surface: Coated
- Centering Diameter [mm]: 65
- Rim Hole Number: 5
- Hole Arrangement / Number: 10 / 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Weight [kg]: 8,3
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Item number: 100.3300.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238718185
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Vehicle Identification Number (VIN) from: A3-JC000 001, 3C-J-000 001
- for PR number: 1ZA, 1ZD, 1ZK, 1ZL, 1ZC, 1ZG, 1ZM, 1ZN
- Diameter [mm]: 312
- Brake Disc Type: internally vented, Perforated
- Product line: SPORT COAT Z
- Brake Disc Thickness [mm]: 25
- Height [mm]: 50
- Surface: Coated
- Centering Diameter [mm]: 65
- Rim Hole Number: 5
- Hole Arrangement / Number: 10 / 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Weight [kg]: 8,3
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Drilled: yes
- Item number: 100.3300.52
- Manufacturer: ZIMMERMANN
- EAN number: 4250238748465
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Vehicle Identification Number (VIN) from: 3C-J-000 001
- for PR number: 1KZ, 2ER
- Diameter [mm]: 310
- Brake Disc Type: Externally Vented
- Product line: COAT Z
- Brake Disc Thickness [mm]: 22
- Height [mm]: 49
- Surface: Coated
- Centering Diameter [mm]: 65
- Rim Hole Number: 5
- Hole Arrangement / Number: 10 / 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Weight [kg]: 6,8
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Item number: 100.3309.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238718208
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Vehicle Identification Number (VIN) from: 3C-J-000 001
- for PR number: 1KZ, 2ER
- Diameter [mm]: 310
- Brake Disc Type: Externally Vented, Perforated
- Product line: SPORT COAT Z
- Brake Disc Thickness [mm]: 22
- Height [mm]: 49
- Surface: Coated
- Centering Diameter [mm]: 65
- Rim Hole Number: 5
- Hole Arrangement / Number: 10 / 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Weight [kg]: 6,8
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Drilled: yes
- Item number: 100.3309.52
- Manufacturer: ZIMMERMANN
- EAN number: 4250238749301
- Condition: New
price incl. 19% VAT
excl. delivery costs