VW Caddy Alltrack Kombi 1.6 TDI Wiper motor (75 hp Diesel CAYE)
- Fitting Position: Left Rear
- Voltage [V]: 12
- Vehicle Equipment: for vehicles with back doors
- Supplementary Article / Supplementary Info Info 2: with integrated washer fluid jet
- Item number: 2190679
- Our price: 72,99 €
- Manufacturer: METZGER
- EAN number: 4062101246400
- Condition: New
- Fitting Position: Rear
- Voltage [V]: 12
- Left- / right-hand drive vehicles: for left-hand / right-hand drive vehicles
- Vehicle Equipment: for vehicles with gull-wing doors
- Number of pins: 4
- Supplementary Article / Supplementary Info Info 2: with integrated washer fluid jet
- Item number: 59696
- Our price: 46,49 €
- Manufacturer: AIC
- EAN number: 4046283596966
- Condition: New
Before installing the wiper arm, connect the wiper motor and Our products are usually delivered without installation instructions. Installation may only be carried out by switch on the ignition so that the motor runs into the park position. trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use.
For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules.
If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at:
Phone: 040 - 25 30 66 55 Email: [email protected]
This often avoids extensive troubleshooting that is disproportionate to normal repair times.
The following applies to complaints: The more complete the processes are submitted, the faster they can be processed.
Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Fitting Position: Rear Axle
- Diameter [mm]: 272
- Brake Disc Type: solid
- Drilled: no
- Surface: Oiled
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Product line: PREMIER
- Brake Disc Thickness [mm]: 10
- Height [mm]: 48
- Centering Diameter [mm]: 65
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 9
- Weight [kg]: 6,2
- Tightening Torque [Nm]: 120
- Test Mark: R90 homologated
- Packing Type: Box
- Packaging length [cm]: 27,5
- Packaging width [cm]: 27,5
- Packaging height [cm]: 10,5
- Item number: DDF1895
- Manufacturer: FERODO
- EAN number: 4044197541324
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 288
- for PR number: 1ZE
- Brake Disc Type: internally vented
- Drilled: no
- Brake Disc Thickness [mm]: 25
- Height [mm]: 49,5
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 22
- Item number: A1002V
- Manufacturer: LPR
- EAN number: 8032532092255
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 312
- for PR number: 1ZA
- Drilled: no
- Brake Disc Thickness [mm]: 25
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 22
- for article number: A1004V
- Item number: A1004V
- Manufacturer: LPR
- EAN number: 8032532102671
- Condition: New
price incl. 19% VAT
- Fitting Position: Front Axle
- Diameter [mm]: 312
- for PR number: 1ZA
- Brake Disc Type: Vented
- Drilled: no
- Supplementary Info: ORIGINAL Quality
- Brake Disc Thickness [mm]: 25
- Height [mm]: 49,9
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Required quantity: 2
- Item number: 115 521 1094
- Manufacturer: MEYLE
- EAN number: 4040074429006
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 272
- Brake Disc Type: solid
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness [mm]: 10
- Height [mm]: 48,3
- Centering Diameter [mm]: 65
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 8
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 15,3
- Item number: 0 986 479 677
- Manufacturer: BOSCH
- EAN number: 4047024749801
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 312
- for PR number: 1ZA
- Brake Disc Type: Vented
- Drilled: no
- Brake Disc Thickness [mm]: 25
- Height [mm]: 50
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Item number: BDC5416
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438069259
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 288
- for PR number: 1ZE
- Brake Disc Type: Vented
- Drilled: no
- Brake Disc Thickness [mm]: 25
- Height [mm]: 50
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Item number: BDC5418
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593840775
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 288
- for PR number: 1ZE
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Brake Disc Thickness [mm]: 25,0
- Height [mm]: 49,9
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 22,0
- Inner Diameter [mm]: 144,0
- MAPP code available
- No. of holes 2: 9
- Test Mark: E1 90R-02C0115 / 0010
- Bore Diameter [mm]: 15,3
- Item number: 24.0125-0145.1
- Manufacturer: ATE
- EAN number: 4006633113472
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 312,0
- for PR number: 1ZA
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Brake Disc Thickness [mm]: 25,0
- Height [mm]: 49,9
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 22,0
- Inner Diameter [mm]: 146,0
- MAPP code available
- No. of holes 2: 9
- Test Mark: E1 90R-02C0115 / 1001
- Bore Diameter [mm]: 15,3
- Item number: 24.0125-0158.1
- Manufacturer: ATE
- EAN number: 4006633209489
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 312
- for PR number: 1ZA
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Brake Disc Thickness [mm]: 25
- Height [mm]: 49,7
- Centering Diameter [mm]: 65
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 15,4
- Item number: 0 986 479 058
- Manufacturer: BOSCH
- EAN number: 4047026223934
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 288
- for PR number: 1ZE
- Brake Disc Type: internally vented
- Drilled: no
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Product line: Prime
- Brake Disc Thickness [mm]: 25
- Height [mm]: 50
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 22
- Tightening Torque [Nm]: 120
- Item number: 09.9145.14
- Manufacturer: BREMBO
- EAN number: 8020584013922
- Condition: New
price incl. 19% VAT
- Fitting Position: Front Axle
- Diameter [mm]: 312
- for PR number: 1ZA
- Brake Disc Type: Vented
- Drilled: no
- Machining: High-carbon
- Brake Disc Thickness [mm]: 25
- Height [mm]: 49,9
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Inner Diameter [mm]: 146
- No. of holes 2: 9
- Bore Diameter [mm]: 15,3
- Item number: 25833
- Manufacturer: MAPCO
- EAN number: 4043605415516
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 312
- for PR number: 1ZA
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Vehicle type: Caddy, Caddy Alltrack
- Brake Disc Thickness [mm]: 25,0
- Height [mm]: 49,9
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Inner Diameter [mm]: 146
- No. of holes 2: 9
- Bore Diameter [mm]: 15,3
- Item number: C3W039ABE
- Manufacturer: ABE
- EAN number: 5901655214055
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 312
- for PR number: 1ZA
- Brake Disc Type: Vented
- Drilled: no
- Surface: Oiled
- Version: Caddy
- Brake Disc Thickness [mm]: 25
- Height [mm]: 49,9
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 22
- Test Mark: E1 90R-02C0277 / 1198
- Item number: BG3953
- Manufacturer: DELPHI
- EAN number: 5012759360545
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 288
- for PR number: 1ZE
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Brake Disc Thickness [mm]: 24,9
- Height [mm]: 49,6
- Centering Diameter [mm]: 65
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 15,3
- Item number: 0 986 479 088
- Manufacturer: BOSCH
- EAN number: 4047024096165
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 288
- for PR number: 1ZE
- Brake Disc Type: Vented
- Drilled: no
- Surface: Oiled
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Product line: PREMIER
- Brake Disc Thickness [mm]: 25
- Height [mm]: 50
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Weight [kg]: 15,35
- Tightening Torque [Nm]: 120
- Test Mark: R90 homologated
- Packing Type: Box
- Packaging length [cm]: 28,5
- Packaging width [cm]: 28,5
- Packaging height [cm]: 10
- Item number: DDF1218
- Manufacturer: FERODO
- EAN number: 4044197247547
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 312
- for PR number: 1ZA
- Brake Disc Type: Vented
- Drilled: no
- Surface: Oiled
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Product line: PREMIER
- Brake Disc Thickness [mm]: 25
- Height [mm]: 50
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 23
- Weight [kg]: 8,94
- Tightening Torque [Nm]: 120
- Test Mark: R90 homologated
- Packing Type: Box
- Packaging length [cm]: 31,3
- Packaging width [cm]: 31,3
- Packaging height [cm]: 10,4
- Item number: DDF1305
- Manufacturer: FERODO
- EAN number: 4044197335183
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 288
- for PR number: 1ZE
- Brake Disc Type: internally vented, slotted
- Drilled: no
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Product line: Xtra
- Brake Disc Thickness [mm]: 25
- Height [mm]: 50
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 22
- Tightening Torque [Nm]: 120
- Item number: 09.9145.75
- Manufacturer: BREMBO
- EAN number: 8020584015162
- Condition: New
For maximum performance in wet conditions, Brembo Max is the affordable grooved and painted disc for the enthusiast.
price incl. 19% VAT
excl. delivery costs