• SHOP
  • CLUB
0
My Garage
Add vehicle
0
items #
0,00 €
Your basket is empty

Skoda Superb 3v5 2.0 TDI 4x4 Wiper motor (200 hp Diesel DTUA)

2 items
Sort by:
Recommended
  • Fitting Position: Rear
  • Voltage [V]: 12
  • Left- / right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles
  • Number of pins: 4
  • Item number: 55105
  • Our price: 118,99 €
  • Manufacturer: AIC
  • EAN number: 4046283551057
  • Condition: New
Show OEM numbers of the product
Additional information

Before installing the wiper arm, connect the wiper motor and Our products are usually delivered without installation instructions. Installation may only be carried out by switch on the ignition so that the motor runs into the park position. trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use.

For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules.

If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at:

Phone: 040 - 25 30 66 55 Email: [email protected]

This often avoids extensive troubleshooting that is disproportionate to normal repair times.

The following applies to complaints: The more complete the processes are submitted, the faster they can be processed.

Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

Details
Free delivery on this item
In stock (Item(s) left: 1)
-37%
compared to RRP 189,56 €

118,99 €

price incl. 19% VAT

free delivery

  • Fitting Position: Rear
  • Voltage [V]: 12
  • Left- / right-hand drive vehicles: for left-hand drive vehicles
  • Quality: EQ (Equivalente)
  • Item number: 064073300010
  • Our price: 115,99 €
  • Manufacturer: MAGNETI MARELLI
  • EAN number: 8050947113204
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
-28%
compared to RRP 161,72 €

115,99 €

price incl. 19% VAT

free delivery

SKODA SUPERB Estate (3V5) 2.0 TDI 4x4 Bestsellers
  • Fitting Position: Front Axle
  • Diameter [mm]: 312
  • for PR number: 1ZA, 1ZK
  • Brake Disc Type: Vented
  • Drilled: no
  • Surface: Coated
  • Machining: High-carbon
  • Brake Disc Thickness [mm]: 25,0
  • Height [mm]: 49,9
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 22
  • Inner Diameter [mm]: 146
  • No. of holes 2: 9
  • Bore Diameter [mm]: 15,3
  • Item number: C3W039ABE
  • Manufacturer: ABE
  • EAN number: 5901655214055
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock (Item(s) left: 2)
51,99 €
Price per item

price incl. 19% VAT

free delivery

ABE C4W014ABE Brake disc Rear Axle, 310x22mm, 9x112, Vented
Article number: C4W014ABE
Submit a review
  • Fitting Position: Rear Axle
  • Diameter [mm]: 310
  • for PR number: 1KZ, 2ER
  • Brake Disc Type: Vented
  • Drilled: no
  • Brake Disc Thickness [mm]: 22
  • Height [mm]: 48,3
  • Centering Diameter [mm]: 65
  • Number of Holes: 9
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 20
  • Thread Size: 15,5
  • Item number: C4W014ABE
  • Manufacturer: ABE
  • EAN number: 5900427206786
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
54,49 €
Price per item

price incl. 19% VAT

free delivery

DELPHI BG3975 Brake disc Rear Axle, 310x22mm, 5, Vented
Article number: BG3975
Submit a review
  • Fitting Position: Rear Axle
  • Diameter [mm]: 310
  • for PR number: 1KZ
  • Brake Disc Type: Vented
  • Drilled: no
  • Surface: Oiled
  • Brake Disc Thickness [mm]: 22
  • Height [mm]: 48,5
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Minimum thickness [mm]: 20
  • Test Mark: E1 90R-02C0289 / 1665
  • Item number: BG3975
  • Manufacturer: DELPHI
  • EAN number: 5012759370155
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
-36%
compared to RRP 99,36 €

62,99 €
Price per item

price incl. 19% VAT

free delivery

LPR A1004V Brake disc Front Axle, 312x25mm, 5
Article number: A1004V
Reviews - 1
  • Fitting Position: Front Axle
  • Diameter [mm]: 312
  • for PR number: 1ZA, 1ZK
  • Drilled: no
  • Brake Disc Thickness [mm]: 25
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Minimum thickness [mm]: 22
  • for article number: A1004V
  • Item number: A1004V
  • Manufacturer: LPR
  • EAN number: 8032532102671
  • Condition: New
Show OEM numbers of the product
Details
In stock (Item(s) left: 2)
40,49 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Rear Axle
  • Diameter [mm]: 310
  • Brake System: ATE
  • for PR number: 1KZ, 2ER, 2EV
  • Brake Disc Type: internally vented
  • Drilled: no
  • Brake Disc Thickness [mm]: 22
  • Height [mm]: 48,4
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Minimum thickness [mm]: 20
  • Item number: A1014V
  • Manufacturer: LPR
  • EAN number: 8032928002936
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock (Item(s) left: 4)
78,99 €
Price per item

price incl. 19% VAT

free delivery

  • Fitting Position: Rear Axle
  • Diameter [mm]: 310,0
  • for PR number: 1KZ, 2ER
  • Brake Disc Type: Vented
  • Drilled: no
  • Surface: Coated
  • Machining: High-carbon
  • Brake Disc Thickness [mm]: 22,0
  • Height [mm]: 48,5
  • Centering Diameter [mm]: 65,0
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 112,0
  • Minimum thickness [mm]: 20,0
  • Inner Diameter [mm]: 169,0
  • MAPP code available
  • No. of holes 2: 9
  • Test Mark: E1 90R-02C0118 / 0945
  • Bore Diameter [mm]: 15,3
  • Item number: 24.0122-0219.1
  • Manufacturer: ATE
  • EAN number: 4006633229630
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
-53%
compared to RRP 143,28 €

66,49 €
Price per item

price incl. 19% VAT

free delivery

  • Fitting Position: Front Axle
  • Diameter [mm]: 312,0
  • for PR number: 1ZA, 1ZK
  • Brake Disc Type: Vented
  • Drilled: no
  • Surface: Coated
  • Machining: High-carbon
  • Supplementary Article / Supplementary Info Info 2: with bolts / screws
  • Brake Disc Thickness [mm]: 25,0
  • Height [mm]: 49,9
  • Centering Diameter [mm]: 65,0
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 112,0
  • Minimum thickness [mm]: 22,0
  • Inner Diameter [mm]: 146,0
  • MAPP code available
  • No. of holes 2: 9
  • Test Mark: E1 90R-02C0115 / 1001
  • Bore Diameter [mm]: 15,3
  • Item number: 24.0125-0158.1
  • Manufacturer: ATE
  • EAN number: 4006633209489
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
-57%
compared to RRP 156,13 €

66,99 €
Price per item

price incl. 19% VAT

free delivery

  • Fitting Position: Front Axle
  • Diameter [mm]: 312
  • for PR number: 1ZA, 1ZK
  • Brake Disc Type: Vented
  • Drilled: no
  • Surface: Coated
  • Machining: High-carbon
  • Supplementary Article / Supplementary Info Info 2: with bolts / screws
  • Brake Disc Thickness [mm]: 25
  • Height [mm]: 49,7
  • Centering Diameter [mm]: 65
  • Number of Holes: 9
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 22
  • fulfils ECE norm: ECE-R90
  • Bore Diameter up to [mm]: 15,4
  • Item number: 0 986 479 058
  • Manufacturer: BOSCH
  • EAN number: 4047026223934
  • Condition: New
Show OEM numbers of the product
Details
In stock
-68%
compared to RRP 154,70 €

49,49 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Front Axle
  • Diameter [mm]: 312
  • for PR number: 1ZA, 1ZK
  • Brake Disc Type: Vented
  • Drilled: no
  • Surface: Oiled
  • Supplementary Article / Supplementary Info Info 2: with bolts / screws
  • Product line: PREMIER
  • Brake Disc Thickness [mm]: 25
  • Height [mm]: 50
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 23
  • Weight [kg]: 8,94
  • Tightening Torque [Nm]: 120
  • Test Mark: R90 homologated
  • Packing Type: Box
  • Packaging length [cm]: 31,3
  • Packaging width [cm]: 31,3
  • Packaging height [cm]: 10,4
  • Item number: DDF1305
  • Manufacturer: FERODO
  • EAN number: 4044197335183
  • Condition: New
Show OEM numbers of the product
Details
In stock
-64%
compared to RRP 109,93 €

39,49 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Front Axle
  • Diameter [mm]: 312
  • for PR number: 1ZA, 1ZK
  • Brake Disc Type: internally vented, Perforated
  • Drilled: yes
  • Surface: Coated
  • Machining: High-carbon
  • Product line: SPORT COAT Z
  • Brake Disc Thickness [mm]: 25
  • Height [mm]: 50
  • Centering Diameter [mm]: 65
  • Rim Hole Number: 5
  • Hole Arrangement / Number: 10 / 5
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 22
  • Weight [kg]: 8,3
  • Test Mark: ECE R90 APPROVED
  • Item number: 100.3300.52
  • Manufacturer: ZIMMERMANN
  • EAN number: 4250238748465
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
-52%
compared to RRP 187,97 €

89,99 €
Price per item

price incl. 19% VAT

free delivery

  • Fitting Position: Rear Axle
  • Diameter [mm]: 310
  • for PR number: 1KZ, 2ER
  • Brake Disc Type: Externally Vented
  • Drilled: no
  • Surface: Coated
  • Machining: High-carbon
  • Product line: COAT Z
  • Brake Disc Thickness [mm]: 22
  • Height [mm]: 49
  • Centering Diameter [mm]: 65
  • Rim Hole Number: 5
  • Hole Arrangement / Number: 10 / 5
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 20
  • Weight [kg]: 6,8
  • Test Mark: ECE R90 APPROVED
  • Item number: 100.3309.20
  • Manufacturer: ZIMMERMANN
  • EAN number: 4250238718208
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
-60%
compared to RRP 137,70 €

53,99 €
Price per item

price incl. 19% VAT

free delivery

  • Fitting Position: Front Axle
  • Diameter [mm]: 312
  • for PR number: 1ZA, 1ZK
  • Brake Disc Type: Vented
  • Drilled: no
  • Machining: High-carbon
  • Brake Disc Thickness [mm]: 25
  • Height [mm]: 49,9
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 22
  • Inner Diameter [mm]: 146
  • No. of holes 2: 9
  • Bore Diameter [mm]: 15,3
  • Item number: 25833
  • Manufacturer: MAPCO
  • EAN number: 4043605415516
  • Condition: New
Show OEM numbers of the product
Details
In stock
-70%
compared to RRP 166,60 €

48,99 €
Price per item

price incl. 19% VAT

excl. delivery costs

DELPHI BG3953 Brake disc Front Axle, 312x25mm, 5, Vented
Article number: BG3953
Submit a review
  • Fitting Position: Front Axle
  • Diameter [mm]: 312
  • for PR number: 1ZA, 1ZK
  • Brake Disc Type: Vented
  • Drilled: no
  • Surface: Oiled
  • Brake Disc Thickness [mm]: 25
  • Height [mm]: 49,9
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Minimum thickness [mm]: 22
  • Test Mark: E1 90R-02C0277 / 1198
  • Item number: BG3953
  • Manufacturer: DELPHI
  • EAN number: 5012759360545
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
126,49 €

price incl. 19% VAT

free delivery

  • Fitting Position: Front Axle
  • Diameter [mm]: 312
  • for PR number: 1ZA, 1ZK
  • Brake Disc Type: Vented
  • Drilled: no
  • Supplementary Info: ORIGINAL Quality
  • Brake Disc Thickness [mm]: 25
  • Height [mm]: 49,9
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Wheel Bolt Bore Diameter [mm]: 15,3
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 22
  • Required quantity: 2
  • Item number: 115 521 1094
  • Manufacturer: MEYLE
  • EAN number: 4040074429006
  • Condition: New
Show OEM numbers of the product
Details
In stock
-70%
compared to RRP 140,05 €

41,99 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Front Axle
  • Diameter [mm]: 312
  • Brake Disc Type: Vented
  • Drilled: no
  • Brake Disc Thickness [mm]: 25
  • Height [mm]: 50
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 22
  • Item number: BDC5416
  • Manufacturer: QUINTON HAZELL
  • EAN number: 5050438069259
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
-37%
compared to RRP 120,07 €

74,49 €
Price per item

price incl. 19% VAT

free delivery

  • Fitting Position: Rear Axle
  • Diameter [mm]: 310
  • for PR number: 1KZ, 2ER
  • Brake Disc Type: Vented
  • Drilled: no
  • Surface: Coated
  • Machining: High-carbon
  • Brake Disc Thickness [mm]: 22
  • Height [mm]: 48,5
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 20
  • Bore Diameter up to [mm]: 15,3
  • fulfils ECE norm: ECE-R90
  • Item number: 0 986 479 303
  • Manufacturer: BOSCH
  • EAN number: 4047024233768
  • Condition: New
Show OEM numbers of the product
Details
In stock
-70%
compared to RRP 140,42 €

40,99 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Front Axle
  • Diameter [mm]: 312
  • for PR number: 1ZA, 1ZK
  • Brake Disc Type: internally vented
  • Drilled: no
  • Surface: Coated
  • Machining: High-carbon
  • Supplementary Article / Supplementary Info Info 2: with bolts / screws
  • Product line: Prime
  • Brake Disc Thickness [mm]: 25
  • Height [mm]: 50
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Minimum thickness [mm]: 22
  • Tightening Torque [Nm]: 120
  • Item number: 09.9772.11
  • Manufacturer: BREMBO
  • EAN number: 8020584018286
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
-69%
compared to RRP 164,18 €

50,49 €
Price per item

price incl. 19% VAT

free delivery

  • Fitting Position: Front Axle
  • Diameter [mm]: 312
  • for PR number: 1ZA, 1ZK
  • Brake Disc Type: internally vented
  • Drilled: no
  • Surface: Coated
  • Machining: High-carbon
  • Product line: COAT Z
  • Brake Disc Thickness [mm]: 25
  • Height [mm]: 50
  • Centering Diameter [mm]: 65
  • Rim Hole Number: 5
  • Hole Arrangement / Number: 10 / 5
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 22
  • Weight [kg]: 8,3
  • Test Mark: ECE R90 APPROVED
  • Item number: 100.3300.20
  • Manufacturer: ZIMMERMANN
  • EAN number: 4250238718185
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
-64%
compared to RRP 146,00 €

51,49 €
Price per item

price incl. 19% VAT

free delivery

Find the best offers on