Twingo c06 1.1 Lambda sensor (60 hp Petrol D7F 700)

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

•for recutting edges and cleaning of damaged outside threads on lambda sensor threads

•especially short execution

•ideal for confined spaces

•special tool steel

HAZET Lambda probe socket 4680-1 ∙ Square, hollow 12.5 mm •For lambda probes on NISSAN ∙ FORD ∙ VOLKSWAGEN ∙ SEAT ∙ (1/2 inch) ∙ Outside hexagon profile ∙ 22 mm ŠKODA etc.

•Optimal fit to the 6-point profile of the lambda probe

•Long design

•Surface: chrome-plated

•Made in Germany

•Drive: Square, hollow 12.5 mm (1/2 inch)

•Output: Outside hexagon profile

•Wrench size: 22 mm

•Dimensions / length: 92 mm

•Diameter d1 (output side): 30.4 mm

•Diameter d2 (drive side): 25 mm

•Net weight: 0.23 kg

•For manual operation

Supplement set for SAC coupling tool set (4 fixing points), •accuracy of fit through high-precision CNC components

5 pcs •required for pre-tensioning the pressure plate before removing and installing SAC clutches with 4-hole pitch

•sturdy design

•chrome plated

•special tool steel



Application range: 4-hole pressure plate necessary for e.g. Mercedes (169) from the year of manufacture 2004 (A-class), Opel Insignia etc.

Application: HAZET Lambda probe socket 4680-3 ∙ Square, hollow 12.5 mm (1/2 inch) ∙ Outside hexagon profile ∙ 22 mm For lambda probe (Wrench size 22 mm) on VW, AUDI

•Choice of Inside square drive 12.5 = 1/2″ or Outside hexagon 32 mm

•Long design

•Surface: chrome-plated

•Made in Germany

•Drive: Square, hollow 12.5 mm (1/2 inch)

•Output: Outside hexagon profile

•Wrench size: 22 mm

•Dimensions / length: 110 mm

•Diameter d1 (output side): 41 mm

•Diameter d2 (drive side): 34.4 mm

•Net weight: 0.51 kg

•For manual operation

Universal 2-arm puller, 6" •For removing e.g. inner bearing, outer bearing, ball bearing, etc.

•It can be used as interior and exterior extractor



The two-armed BRILLIANT TOOLS universal extractor BT631022 can be used as an interior and exterior extractor. The extractor has a clamping width of 60 mm to 12 cm and a clamping height of 13 cm, making it the best option for removing discs, sprockets, ball bearings, pulleys, gears and much more.