Vehicle identification number: 8004AMK
Skoda Octavia Mk2 Estate 2.0 TDI 4x4 Holder, air filter housing (110 hp Diesel CFHF)
- Length [mm]: 91
- Thickness [mm]: 6
- Width [mm]: 79
- Item number: 16074900
- Our price: 1,68 €
- Manufacturer: AJUSA
- EAN number: 8427769806018
- Condition: New
- Material: NBR (nitrile butadiene rubber)
- Shape: O-Ring
- Inner Diameter [mm]: 79
- Thickness [mm]: 6
- Item number: 113 883
- Our price: 1,78 €
- Manufacturer: TOPRAN
- EAN number: 1117610000104
- Condition: New
Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Supplementary Info: Q+, original equipment manufacturer quality MADE IN GERMANY
- Width [mm]: 155,0
- Length [mm]: 300
- Filter type: Filter Insert
- Height [mm]: 46
- Weight [kg]: 0,0095
- Packaging width [cm]: 9
- Packaging height [cm]: 0,59
- Packaging Depth [cm]: 9
- Item number: V10-2571
- Our price: 2,12 €
- Manufacturer: VAICO
- EAN number: 4046001585883
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Inner Diameter [mm]: 79
- Thickness [mm]: 6
- Material: NBR (nitrile butadiene rubber)
- Shape: O-Ring
- Goods tariff number: 4016935050
- Item number: 897.580
- Our price: 2,14 €
- Manufacturer: ELRING
- EAN number: 4041248611951
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Shape: O-Ring
- Item number: 1118750200
- Our price: 1,73 €
- Manufacturer: JP GROUP
- EAN number: 5710412601546
- Condition: New
-
- Fitting Position: Rear Axle
- for PR number: 1KS
- paired article number: FDB4316
- Diameter [mm]: 272
- Brake Disc Type: solid
- Product line: PREMIER
- Brake Disc Thickness [mm]: 10
- Height [mm]: 48
- Surface: Oiled
- Centering Diameter [mm]: 65
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 9
- Weight [kg]: 6,2
- Tightening Torque [Nm]: 120
- Test Mark: R90 homologated
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Packing Type: Box
- Packaging length [cm]: 27,5
- Packaging width [cm]: 27,5
- Packaging height [cm]: 10,5
- Drilled: no
- Item number: DDF1895
- Manufacturer: FERODO
- EAN number: 4044197541324
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 255
- Brake Disc Type: solid
- Construction Year to: 01 / 2013
- Brake Disc Thickness [mm]: 10
- Fitting Position: Rear Axle
- Height [mm]: 51,6
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 8
- Inner Diameter [mm]: 65
- Bore Diameter [mm]: 15,3
- Drilled: no
- Item number: 25831
- Manufacturer: MAPCO
- EAN number: 4043605404640
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- for PR number: 1ZF, 1ZM
- Construction Year to: 01 / 2013
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Fitting Position: Front Axle
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Drilled: no
- Item number: 25832
- Manufacturer: MAPCO
- EAN number: 4043605415097
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 255
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Fitting Position: Rear Axle
- Height [mm]: 51,3
- Centering Diameter [mm]: 65
- Number of Holes: 9
- Rim Hole Number: 9
- Thickness [mm]: 10
- Minimum thickness [mm]: 7
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: C4W012ABE
- Manufacturer: ABE
- EAN number: 5900427206762
- Condition: New
-
- Fitting Position: Front Axle
- for PR number: 1ZF, 1ZM
- Diameter [mm]: 280
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 22
- Height [mm]: 49,5
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Rim Hole Number: 5
- Drilled: no
- Item number: A1001V
- Manufacturer: LPR
- EAN number: 8032532104033
- Condition: New
-
- Fitting Position: Front Axle
- for PR number: 1ZE
- Diameter [mm]: 288
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 25
- Height [mm]: 49,5
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 22
- Drilled: no
- Item number: A1002V
- Manufacturer: LPR
- EAN number: 8032532092255
- Condition: New
price incl. 19% VAT
-
- Fitting Position: Rear Axle
- for PR number: 1KD
- Brake System: TRW
- Brake Disc Thickness [mm]: 10
- Height [mm]: 51,3
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Drilled: no
- Item number: A1003P
- Manufacturer: LPR
- EAN number: 8032532092286
- Condition: New
-
- for PR number: 1KF
- Construction Year to: 01 / 2013
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Brake System: Lucas / TRW
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 16,9
- Supplementary Article / Supplementary Info: with accessories
- Height [mm]: 56,4
- Width [mm]: 105,2
- Test Mark: E1 90R-02A0498 / 0349
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Vehicle Equipment: for vehicles with electric parking brake
- MAPP code available
- Article number of recommended accessories: 13.0460-0517.2
- Number of bolts / screws: 4
- Item number: 13.0460-2749.2
- Our price: 36,85 €
- Manufacturer: ATE
- EAN number: 4006633330015
- Condition: New
for vehicles with electric handbrake
-
- for PR number: 1ZM
-
- for PR number: 1ZF
-
- for PR number: 1ZC
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Fitting Position: Front Axle
- Height [mm]: 49,5
- Surface: Coated
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 22
- Minimum thickness [mm]: 19
- Tightening Torque [Nm]: 120
- Machining: High-carbon
- Colour: black
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: C3S013ABE
- Manufacturer: ABE
- EAN number: 5900427201446
- Condition: New
-
- Fitting Position: Rear Axle
- for PR number: 1KF
- Diameter [mm]: 256
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Height [mm]: 48,3
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Rim Hole Number: 5
- Minimum thickness [mm]: 10
- Drilled: no
- Item number: A1010P
- Manufacturer: LPR
- EAN number: 8032928002509
- Condition: New
- Diameter [mm]: 255, 253,0
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10,0
- Fitting Position: Rear Axle
- Height [mm]: 51,2
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Production Number: 6050260
- Drilled: no
- Item number: 6050260
- Manufacturer: KRAFT
- EAN number: 5900427206762
- Condition: New
-
- Fitting Position: Rear Axle
- for PR number: 1KS
- Diameter [mm]: 272
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Height [mm]: 48,3
- Surface: Oiled
- Centering Diameter [mm]: 65
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 8
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 15,3
- Drilled: no
- Item number: 0 986 479 677
- Manufacturer: BOSCH
- EAN number: 4047024749801
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Fitting Position: Front Axle
- Height [mm]: 50
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Drilled: no
- Item number: BDC5418
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593840775
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- for PR number: 1KF
- Diameter [mm]: 260
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Height [mm]: 48,4
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 10
- Drilled: no
- Item number: BDC5423
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438055429
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- for PR number: 1KS
- for brake disc diameter [mm]: 272
- for brake disc thickness [mm]: 10
- Manufacturer Restriction: BOSCH
- Quantity Unit: Axle Set
- Brake System: BOSCH
- Wear Warning Contact: not prepared for wear warning indicator
- Supplementary Info: Q+, original equipment manufacturer quality
- Thickness [mm]: 16,5
- Fitting Position: Rear Axle
- Height [mm]: 53,3
- Width [mm]: 109,3
- Weight [kg]: 1,063
- Packaging width [cm]: 9
- Packaging height [cm]: 9
- Packaging Depth [cm]: 12,7
- Item number: V10-0769
- Our price: 25,05 €
- Manufacturer: VAICO
- EAN number: 4046001471087
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.