Vehicle identification number: 0588AKR
Audi A5 B8 1.8 TFSI Holder, air filter housing (160 hp Petrol CDHB)
- Length [mm]: 91
- Thickness [mm]: 6
- Width [mm]: 79
- Item number: 16074900
- Our price: 1,72 €
- Manufacturer: AJUSA
- EAN number: 8427769806018
- Condition: New
- Material: NBR (nitrile butadiene rubber)
- Shape: O-Ring
- Inner Diameter [mm]: 79
- Thickness [mm]: 6
- Item number: 113 883
- Our price: 1,83 €
- Manufacturer: TOPRAN
- EAN number: 1117610000104
- Condition: New
Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
price incl. 19% VAT
excl. delivery costs
- Supplementary Info: Q+, original equipment manufacturer quality MADE IN GERMANY
- Width [mm]: 155,0
- Length [mm]: 300
- Filter type: Filter Insert
- Height [mm]: 46
- Weight [kg]: 0,0095
- Packaging width [cm]: 9
- Packaging height [cm]: 0,59
- Packaging Depth [cm]: 9
- Item number: V10-2571
- Our price: 2,19 €
- Manufacturer: VAICO
- EAN number: 4046001585883
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Inner Diameter [mm]: 79
- Thickness [mm]: 6
- Material: NBR (nitrile butadiene rubber)
- Shape: O-Ring
- Goods tariff number: 4016935050
- Item number: 897.580
- Our price: 2,24 €
- Manufacturer: ELRING
- EAN number: 4041248611951
- Condition: New
- Shape: O-Ring
- Item number: 1118750200
- Our price: 1,79 €
- Manufacturer: JP GROUP
- EAN number: 5710412601546
- Condition: New
-
- Construction Year to: 06 / 2011
- Fitting Position: Front Axle
- for PR number: 1LA
- Diameter [mm]: 320
- Brake Disc Type: internally vented
- Brake System: TRW
- Brake Disc Thickness [mm]: 30
- Height [mm]: 52,1
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Minimum thickness [mm]: 28
- Drilled: no
- Item number: A1033V
- Manufacturer: LPR
- EAN number: 8032928084574
- Condition: New
- Diameter [mm]: 320
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 30
- Fitting Position: Front Axle
- Height [mm]: 52,4
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 28
- Drilled: no
- Item number: BDC5710
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438159875
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- for PR number: 1LA, 1LD, 1LJ
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Brake System: Lucas / TRW
- Wear Warning Contact: incl. wear warning contact
- Thickness [mm]: 19,2
- Number of wear indicators [per axle]: 1
- Height [mm]: 73,5
- Height 2 [mm]: 73,0
- Width [mm]: 188,0
- Test Mark: E1 90R-02A0612 / 0458
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Warning Contact Length [mm]: 305
- MAPP code available
- Number of bolts / screws: 4
- Observe dimensions
- Spring Clip Diameter [mm]: 44
- Item number: 13.0460-2746.2
- Our price: 78,78 €
- Manufacturer: ATE
- EAN number: 4006633330008
- Condition: New
-
- for PR number: 1KE, 1KP
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Brake System: Lucas / TRW
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Height [mm]: 58,5
- Width [mm]: 116,4
- Thickness 1 [mm]: 17,4
- Thickness 2 [mm]: 17,7
- Test Mark: E9 90R-02A1379 / 2358
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Number of bolts / screws: 4
- Item number: 13.0460-2748.2
- Our price: 60,01 €
- Manufacturer: ATE
- EAN number: 4006633324885
- Condition: New
-
- for PR number: 1LT
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: incl. wear warning contact
- Number of wear indicators [per axle]: 1
- Height 1 [mm]: 67,0
- Height 2 [mm]: 72,0
- Width 2 [mm]: 155,1
- Width 1 [mm]: 155,1
- Thickness 1 [mm]: 21,3
- Thickness 2 [mm]: 19,8
- Test Mark: E1 90R-02A0334 / 0381
- Warning Contact Length [mm]: 281
- MAPP code available
- Item number: 13.0460-7256.2
- Our price: 69,62 €
- Manufacturer: ATE
- EAN number: 4006633319577
- Condition: New
-
- for PR number: 1KW, 2EH
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Brake System: Lucas / TRW
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Product line: Ceramic
- Supplementary Article / Supplementary Info: with accessories
- Height [mm]: 58,5
- Width [mm]: 116,4
- Thickness 1 [mm]: 17,4
- Thickness 2 [mm]: 17,7
- Test Mark: E9 90R-02A1242 / 2358
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Article number of recommended accessories: 13.0460-0517.2
- Number of bolts / screws: 4
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-2747.2
- Our price: 74,72 €
- Manufacturer: ATE
- EAN number: 4006633346344
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
-
- for PR number: 1KE, 1KP
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Brake System: Lucas / TRW
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 17,4
- Product line: Ceramic
- Supplementary Article / Supplementary Info: with accessories
- Height [mm]: 58,5
- Width [mm]: 116,4
- Test Mark: E9 90R-02A1242 / 2358
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Number of bolts / screws: 4
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-2748.2
- Our price: 78,79 €
- Manufacturer: ATE
- EAN number: 4006633346368
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 06 / 2011
- Fitting Position: Front Axle
- for PR number: 1LJ
- Diameter [mm]: 345
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 29,4
- Height [mm]: 51,8
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Minimum thickness [mm]: 28
- Drilled: no
- Item number: A1034V
- Manufacturer: LPR
- EAN number: 8032928084581
- Condition: New
-
- Fitting Position: Rear Axle
- for PR number: 1KW, 2EH
- Diameter [mm]: 300
- Brake Disc Type: solid
- Brake System: TRW
- Brake Disc Thickness [mm]: 12
- Height [mm]: 36,2
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Minimum thickness [mm]: 10
- Drilled: no
- Item number: A1035P
- Manufacturer: LPR
- EAN number: 8032928084598
- Condition: New
price incl. 19% VAT
-
- Fitting Position: Front Axle
- for PR number: 1LD
- Diameter [mm]: 345
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 30
- Height [mm]: 52,1
- Surface: Coated
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 28
- Machining: High-carbon
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 15,3
- Drilled: no
- Item number: 0 986 479 747
- Manufacturer: BOSCH
- EAN number: 4047024887169
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 330
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Fitting Position: Rear Axle
- Height [mm]: 36,4
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Drilled: no
- Item number: BDC5712
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438159899
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 300
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Fitting Position: Rear Axle
- Height [mm]: 36,2
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 10
- Drilled: no
- Item number: BDC5618
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438158953
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- for PR number: 1KW, 2EH
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Brake System: Lucas / TRW
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Height [mm]: 58,5
- Width [mm]: 116,4
- Thickness 1 [mm]: 17,4
- Thickness 2 [mm]: 17,7
- Test Mark: E9 90R-02A1379 / 2358, E1 90R-02A0652 / 0206
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Article number of recommended accessories: 13.0460-0517.2
- Number of bolts / screws: 4
- Item number: 13.0460-2747.2
- Our price: 54,12 €
- Manufacturer: ATE
- EAN number: 4006633323390
- Condition: New
-
- for PR number: 1LA, 1LD, 1LJ
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Brake System: Lucas / TRW
- Wear Warning Contact: incl. wear warning contact
- Thickness [mm]: 19,2
- Product line: Ceramic
- Supplementary Article / Supplementary Info: with accessories
- Number of wear indicators [per axle]: 1
- Height [mm]: 73,5
- Width [mm]: 188,0
- Test Mark: E1 90R-02A0479 / 0459
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Warning Contact Length [mm]: 305
- MAPP code available
- Number of bolts / screws: 4
- Observe dimensions
- Spring Clip Diameter [mm]: 44
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-2746.2
- Our price: 109,29 €
- Manufacturer: ATE
- EAN number: 4006633346337
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
price incl. 19% VAT
excl. delivery costs
-
- for PR number: 1LT
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: incl. wear warning contact
- Product line: Ceramic
- Number of wear indicators [per axle]: 1
- Height 1 [mm]: 67,0
- Height 2 [mm]: 72,0
- Width 2 [mm]: 155,1
- Width 1 [mm]: 155,1
- Thickness 1 [mm]: 21,3
- Thickness 2 [mm]: 19,8
- Test Mark: E1 90R-02A0479 / 0475
- Warning Contact Length [mm]: 281
- MAPP code available
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-7256.2
- Our price: 96,37 €
- Manufacturer: ATE
- EAN number: 4006633347167
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.