Mini Clubman F54 1.5 Cooper ALL4 Haldex oil (136 hp Petrol B36 A15 A)
Recommended part replacement interval for your car for the part category Haldex oil: every 50.000 km
- Capacity [litre]: 0,275
- Colour: yellow
- Oil manufacturer recommendation: VW TL 52175, VW TL 52175-Y, VW TL 52175-X
- Drive Type: All-wheel Drive
- Chemical Properties: Synthetic
- Recommended change interval [km]: 30000
- Packing Type: Cartridge
- Manufacturer recommendations: G 052 175A 1, Haldex
- Item number: V60-0361
- Our price: 14,49 €
- Manufacturer: VAICO
- EAN number: 4046001962639
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Capacity [litre]: 0,85
- Colour: yellow
- Oil manufacturer recommendation: VW TL 52175-Y, VW TL 52175-X
- Chemical Properties: Contains mineral oil
- Recommended change interval [years]: 2
- Recommended change interval [km]: 60000
- Observe system fill quantity
- Observe the vehicle manufacturer specifications
- Drive Type: All-wheel Drive
- Packing Type: Bottle
- Oil: Part Synthetic Oil
- Item number: V60-0450
- Our price: 39,99 €
- Manufacturer: VAICO
- EAN number: 4062375308194
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Brake System: ATE
- Wear Warning Contact: prepared for wear warning indicator
-
- Article number of recommended accessories: 98052100
- Braking System: for vehicles with Performance brakes
- Thickness: 16,2
- Quantity Unit: Axle Set
- Height 1 [mm]: 47,8
- Height 2 [mm]: 46,2
- Width [mm]: 123,2
- WVA Number: 25331
- Weight [kg]: 0,9
- Packaging length [cm]: 12,5
- Packaging width [cm]: 8,1
- Packaging height [cm]: 8
- Item number: 2533101
- Our price: 51,99 €
- Manufacturer: TEXTAR
- EAN number: 4019722469275
- Condition: New
- Fitting Position: Front Axle
- Brake System: Lucas
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
-
- Braking System: for vehicles without JCW sport brakes
- Article number of recommended accessories: 98052000
- Thickness: 18,3
- Quantity Unit: Axle Set
- Height 1 [mm]: 64,2
- Height 2 [mm]: 70,6
- Width [mm]: 128,9
- WVA Number: 22187
- Weight [kg]: 1,66
- Packaging length [cm]: 15,2
- Packaging width [cm]: 8,8
- Packaging height [cm]: 8,4
- Item number: 2218701
- Our price: 66,99 €
- Manufacturer: TEXTAR
- EAN number: 4019722476587
- Condition: New
- Fitting Position: Rear Axle
- Wear Warning Contact: prepared for wear warning indicator
- Thickness: 16,2
- Quantity Unit: Axle Set
- Height 1 [mm]: 47,8
- Height 2 [mm]: 46,2
- Width [mm]: 123,2
- WVA Number: 25331 25332
- Item number: SKBP-0011668
- Our price: 18,99 €
- Manufacturer: STARK
- EAN number: 4059191484232
- Condition: New
- Fitting Position: Rear Axle
- Brake System: ATE
- Construction Year to: 04 / 2019
- Wear Warning Contact: prepared for wear warning indicator
-
- Braking System: for vehicles with Performance brakes
- Article number of recommended accessories: 8DK 355 252-621
- Thickness: 16,2
- Quantity Unit: Axle Set
- Height 1 [mm]: 47,8
- Height 2 [mm]: 46,2
- Width [mm]: 123,2
- WVA Number: 25331
- Weight [kg]: 0,9
- Assy. / disassy. by qualified personnel required!
- Item number: 8DB 355 021-681
- Our price: 23,99 €
- Manufacturer: HELLA
- EAN number: 4082300493337
- Condition: New
- Fitting Position: Front Axle
- Diameter: 294
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Product line: PRO
- Brake Disc Thickness: 22
- Height: 45,2
- Centering Diameter [mm]: 67
- Hole Arrangement / Number: 05 / 06
- Wheel Bolt Bore Diameter [mm]: 16,8
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20,4
- Inner Diameter [mm]: 150,7
- Weight [kg]: 6,3
- Assy. / disassy. by qualified personnel required!
- Item number: 8DD 355 122-651
- Manufacturer: HELLA
- EAN number: 4082300602364
- Condition: New
price incl. 19% VAT
- Fitting Position: Rear Axle
- Diameter: 280
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Brake Disc Thickness: 10
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness: 50
- Minimum thickness [mm]: 8,4
- Number of mounting bores: 1
- Observe service information
- Item number: ADB114324
- Manufacturer: BLUE PRINT
- EAN number: 5050063269086
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter: 280
- Brake Disc Type: solid
- Drilled: no
- Surface: Uncoated
- Machining: Untreated
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Brake Disc Thickness: 10
- Height: 50,5
- Material: Cast Iron
- Centering Diameter [mm]: 67
- Number of Holes: 5 / 6
- Wheel Bolt Bore Diameter [mm]: 16,6
- Bolt Hole Circle Ø [mm]: 112
- usable for vehicles to construction year: 2016 / 11
- Item number: SKBD-0023832
- Manufacturer: STARK
- EAN number: 4059191591596
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter: 280
- Brake Disc Type: solid
- Drilled: no
- Surface: Uncoated
- Machining: Untreated
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Brake Disc Thickness: 10
- Height: 50,5
- Material: Cast Iron
- Centering Diameter [mm]: 67
- Number of Holes: 5 / 6
- Wheel Bolt Bore Diameter [mm]: 16,6
- Bolt Hole Circle Ø [mm]: 112
- Item number: 82B1688
- Manufacturer: RIDEX
- EAN number: 4059191591602
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter: 294
- Brake Disc Type: Vented
- Drilled: no
- Brake Disc Thickness: 22
- Height: 45,2
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Minimum thickness [mm]: 20,4
- Weight [kg]: 6,22
- Item number: 61545.10
- Manufacturer: REMSA
- EAN number: 8427975165541
- Condition: New
price incl. 19% VAT
- Fitting Position: Front Axle
- Wear Warning Contact: prepared for wear warning indicator
- Quantity Unit: Axle Set
- Height 1 [mm]: 64,3
- Height 2 [mm]: 70,7
- Width 2 [mm]: 129,0
- Width 1 [mm]: 129,0
- Thickness 1 [mm]: 17,7
- Thickness 2 [mm]: 17,7
- WVA Number: 25207 25208
- Weight [kg]: 1,80
- fulfils ECE norm: ECE-R90
- Item number: SKBP-0011665
- Our price: 25,49 €
- Manufacturer: STARK
- EAN number: 4059191484089
- Condition: New
- Fitting Position: Front Axle
- Brake System: Brembo
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article / Supplementary Info: with accessories
- Braking System: for vehicles with JCW sport brakes
- Thickness: 15
- Quantity Unit: Axle Set
- Height: 91,2
- Width [mm]: 114,7
- WVA Number: 22344
- Weight [kg]: 1,9
- Packaging length [cm]: 17
- Packaging width [cm]: 12
- Packaging height [cm]: 8,3
- Item number: 2234401
- Our price: 76,99 €
- Manufacturer: TEXTAR
- EAN number: 4019722489396
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Brake System: Lucas
- Construction Year from: 07 / 2019
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
-
- Braking System: for vehicles with Performance brakes
- Article number of recommended accessories: 8DK 355 252-641
- Thickness: 18,3
- Quantity Unit: Axle Set
- Height 1 [mm]: 64,2
- Height 2 [mm]: 70,6
- Width [mm]: 128,9
- WVA Number: 22187
- Weight [kg]: 1,66
- Assy. / disassy. by qualified personnel required!
- Item number: 8DB 355 023-091
- Our price: 65,99 €
- Manufacturer: HELLA
- EAN number: 4082300597981
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter: 280
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Product line: PRO
- Brake Disc Thickness: 10
- Height: 50,5
- Centering Diameter [mm]: 67
- Hole Arrangement / Number: 05 / 06
- Wheel Bolt Bore Diameter [mm]: 16,6
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 8,4
- Inner Diameter [mm]: 155,3
- Weight [kg]: 4,1
- Assy. / disassy. by qualified personnel required!
- Item number: 8DD 355 122-661
- Manufacturer: HELLA
- EAN number: 4082300602371
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter: 280
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Product line: PRO
- Brake Disc Thickness: 10
- Height: 50,5
- Centering Diameter [mm]: 67
- Hole Arrangement / Number: 05 / 06
- Wheel Bolt Bore Diameter [mm]: 16,6
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 8,4
- Inner Diameter [mm]: 155,3
- Weight [kg]: 4,1
- Packaging length [cm]: 30,8
- Packaging width [cm]: 30,8
- Packaging height [cm]: 12,7
- Item number: 92274603
- Manufacturer: TEXTAR
- EAN number: 4019722478017
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Wear Warning Contact: prepared for wear warning indicator
- Quantity Unit: Axle Set
- Length [mm]: 123
- Width [mm]: 47
- Thickness 1 [mm]: 16
- Test Mark: ECE R90 Approved
- Observe service information
- Item number: ADB114218
- Our price: 21,99 €
- Manufacturer: BLUE PRINT
- EAN number: 5050063254747
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Diameter: 294
- Brake Disc Type: Vented
- Drilled: no
- Surface: Uncoated
- Machining: Untreated
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Brake Disc Thickness: 22
- Height: 45,2
- Material: Cast Iron
- Centering Diameter [mm]: 67
- Number of Holes: 5 / 6
- Wheel Bolt Bore Diameter [mm]: 16,8
- Bolt Hole Circle Ø [mm]: 112
- usable for vehicles to construction year: 2016 / 11
- Item number: SKBD-0023587
- Manufacturer: STARK
- EAN number: 4059191496044
- Condition: New
- Fitting Position: Rear Axle
- Wear Warning Contact: prepared for wear warning indicator
- Quantity Unit: Axle Set
- Length [mm]: 123
- Width [mm]: 47
- Thickness 1 [mm]: 16
- Test Mark: ECE R90 Approved
- Weight [kg]: 0,82
- Observe service information
- Item number: 16910
- Our price: 20,99 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816169109
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Wear Warning Contact: prepared for wear warning indicator
- Quantity Unit: Axle Set
- Length [mm]: 123
- Width [mm]: 47,4, 46,6
- Thickness 1 [mm]: 16
- Test Mark: ECE R90 Approved
- Weight [kg]: 0,85
- Item number: 20 91 6910
- Our price: 31,99 €
- Manufacturer: SWAG
- EAN number: 4044688169105
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.