Vehicle identification number: 0005CCK
BMW F48 xDrive 20 d Haldex oil (190 hp Diesel B47 C20 B)
Recommended part replacement interval for your car for the part category Haldex oil: every 50.000 km
- Colour: yellow
- Capacity [litre]: 0,275
- Oil manufacturer recommendation: VW TL 52175, VW TL 52175-Y, VW TL 52175-X
- Drive Type: All-wheel Drive
- Chemical Properties: Synthetic
- Recommended change interval [km]: 30000
- Packing Type: Cartridge
- Manufacturer recommendations: G 052 175A 1, Haldex
- Item number: V60-0361
- Our price: 15,99 €
- Manufacturer: VAICO
- EAN number: 4046001962639
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Colour: yellow
- Capacity [litre]: 0,85
- Weight [kg]: 0,8
- Observe service information
- Manufacturer recommendations: VW TL 52175-Y
- Packing Type: Bottle
- Item number: 101172
- Our price: 19,99 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4054224011720
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Colour: yellow
- Capacity [litre]: 0,85
- Oil manufacturer recommendation: VW TL 52175-Y, VW TL 52175-X
- Chemical Properties: Contains mineral oil
- Recommended change interval [years]: 2
- Recommended change interval [km]: 60000
- Observe system fill quantity
- Observe the vehicle manufacturer specifications
- Drive Type: All-wheel Drive
- Packing Type: Bottle
- Oil: Part Synthetic Oil
- Item number: V60-0450
- Our price: 38,99 €
- Manufacturer: VAICO
- EAN number: 4062375308194
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Colour: yellow
- Capacity [litre]: 0,85
- Weight [kg]: 0,8
- Observe service information
- Manufacturer recommendations: VW TL 52175-Y
- Packing Type: Bottle
- Item number: 30 10 1172
- Our price: 27,99 €
- Manufacturer: SWAG
- EAN number: 4054228011726
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Wear Warning Contact: prepared for wear warning indicator
- Thickness [mm]: 16
- Quantity Unit: Axle Set
- Height [mm]: 46,6
- Width [mm]: 123
- Test Mark: E9 90R-02A0120 / 3972
- Manufacturer Restriction: ATE
- Item number: GDB2063
- Our price: 30,99 €
- Manufacturer: TRW
- EAN number: 3322938267414
- Condition: New
- Fitting Position: Rear Axle
- Brake System: ATE
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article / Supplementary Info: without accessories
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
-
- for brake disc diameter [mm]: 300
- Alternatively
- for article number: LX0683
- Quantity Unit: Axle Set
- Height 1 [mm]: 47,6
- Height 2 [mm]: 46,3
- Width 2 [mm]: 123,2
- Width 1 [mm]: 123,2
- Thickness 1 [mm]: 15,9
- Thickness 2 [mm]: 15,9
- WVA Number: 25331, 25332
- Test Mark: E9 90R-02A0825 / 3972
- FMSI Code: D1762-8993
- Friction Lining Material: Semi-Metallic
- Item number: LP2719
- Our price: 29,49 €
- Manufacturer: DELPHI
- EAN number: 5012759519745
- Condition: New
2 pairs of pads
- Fitting Position: Rear Axle
- Brake System: ATE
- Wear Warning Contact: prepared for wear warning indicator
- Article number of recommended accessories: 98052100
- Thickness [mm]: 16,2
- Quantity Unit: Axle Set
- Height 1 [mm]: 47,8
- Height 2 [mm]: 46,2
- Width [mm]: 123,2
- WVA Number: 25331
- Weight [kg]: 0,9
- Packaging length [cm]: 12,5
- Packaging width [cm]: 8,1
- Packaging height [cm]: 8
- Item number: 2533101
- Our price: 51,49 €
- Manufacturer: TEXTAR
- EAN number: 4019722469275
- Condition: New
- Fitting Position: Rear Axle
- Thickness [mm]: 16
- Quantity Unit: Axle Set
- Length [mm]: 123
- Height [mm]: 46,6
- Height 2 [mm]: 47,4
- Test Mark: E990R-02A0118 / 3972
- Item number: 1573.00
- Our price: 24,99 €
- Manufacturer: REMSA
- EAN number: 8427975040138
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 330
- Brake Disc Type: Vented
- Drilled: no
- Brake Disc Thickness [mm]: 24
- Height [mm]: 45,2
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Minimum thickness [mm]: 22,4
- Weight [kg]: 9,16
- Item number: 61546.10
- Manufacturer: REMSA
- EAN number: 8427975165558
- Condition: New
- Fitting Position: Rear Axle
- Wear Warning Contact: prepared for wear warning indicator
- Thickness [mm]: 16,2
- Quantity Unit: Axle Set
- Height 1 [mm]: 47,8
- Height 2 [mm]: 46,2
- Width [mm]: 123,2
- WVA Number: 25331 25332
- Item number: SKBP-0011668
- Our price: 19,49 €
- Manufacturer: STARK
- EAN number: 4059191484232
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Construction Year to: 05 / 2022
- Construction Year from: 10 / 2015
- Brake Disc Type: Vented, internally vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Brake Disc Thickness [mm]: 20
- Height [mm]: 50,6
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 18,4
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 16,7
- Item number: 0 986 479 C95
- Manufacturer: BOSCH
- EAN number: 4047025568104
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Brake System: ATE
- Wear Warning Contact: prepared for wear warning indicator
- Quantity Unit: Axle Set
- Height 1 [mm]: 48
- Height 2 [mm]: 46,7
- Width 2 [mm]: 123,2
- Width 1 [mm]: 123,2
- Thickness 1 [mm]: 15,2
- Thickness 2 [mm]: 15,2
- Weight [kg]: 0,92
- Item number: 35030
- Our price: 20,49 €
- Manufacturer: A.B.S.
- EAN number: 8717109634365
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 330
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Product line: COAT Z
- Brake Disc Thickness [mm]: 24
- Height [mm]: 45
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22,4
- Weight [kg]: 9,2
- Test Mark: ECE R90 APPROVED
- Item number: 150.2930.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238764472
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 330
- Brake Disc Type: internally vented, Perforated
- Drilled: yes
- Surface: Coated
- Machining: High-carbon
- Product line: SPORT COAT Z
- Brake Disc Thickness [mm]: 24
- Height [mm]: 45
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22,4
- Weight [kg]: 9,2
- Test Mark: ECE R90 APPROVED
- Item number: 150.2930.52
- Manufacturer: ZIMMERMANN
- EAN number: 4250238764816
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Product line: COAT Z
- Brake Disc Thickness [mm]: 20
- Height [mm]: 51
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 18,4
- Weight [kg]: 5,5
- Test Mark: ECE R90 APPROVED
- Item number: 150.2932.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238764465
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: internally vented, Perforated
- Drilled: yes
- Surface: Coated
- Machining: High-carbon
- Product line: SPORT COAT Z
- Brake Disc Thickness [mm]: 20
- Height [mm]: 51
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 18,4
- Weight [kg]: 5,5
- Test Mark: ECE R90 APPROVED
- Item number: 150.2932.52
- Manufacturer: ZIMMERMANN
- EAN number: 4250238764830
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article / Supplementary Info: with accessories, with spring
- Supplementary Article / Supplementary Info Info 2: with adhesive film
- Thickness [mm]: 18,5
- Quantity Unit: Axle Set
- Length [mm]: 129
- Height [mm]: 70,4
- Height 2 [mm]: 75,4
- Item number: 1625.08
- Our price: 38,49 €
- Manufacturer: REMSA
- EAN number: 8427975042583
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 330
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Braking System: for vehicles with a standard brake system
- Product line: COATED
- Brake Disc Thickness [mm]: 24
- Height [mm]: 45,2
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22,4
- Hub Diameter [mm]: 160
- Weight [kg]: 9,11
- Item number: 18448
- Manufacturer: A.B.S.
- EAN number: 8717109647709
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Brake System: TRW
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article / Supplementary Info: with accessories
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
-
- Suspension: for vehicles without M technology
- Article number of recommended accessories: 98052000
- Thickness [mm]: 18,6
- Quantity Unit: Axle Set
- Height 1 [mm]: 74,6
- Height 2 [mm]: 70,1
- Width [mm]: 129,2
- WVA Number: 25617
- Weight [kg]: 2,1
- Packaging length [cm]: 15,2
- Packaging width [cm]: 8,8
- Packaging height [cm]: 8,4
- Item number: 2561701
- Our price: 62,49 €
- Manufacturer: TEXTAR
- EAN number: 4019722477096
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 330
- Construction Year to: 05 / 2022
- Construction Year from: 10 / 2015
- Brake Disc Type: Vented, internally vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Vehicle Equipment: for vehicles without sports package
- Brake Disc Thickness [mm]: 24
- Height [mm]: 45,2
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22,4
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 16,8
- Item number: 0 986 479 C94
- Manufacturer: BOSCH
- EAN number: 4047025571081
- Condition: New
price incl. 19% VAT
excl. delivery costs