BMW E60 535 i xDrive Gearbox oil and transmission oil (305 hp Petrol N54 B30 A)
Recommended part replacement interval for your car for the part category Gearbox oil and transmission oil: every 50.000 km
- SAE-Viskositätsklasse: ATF III
- Manufacturer recommendations: CAT TO-2, MB 236.5, ZF TE-ML 09, ZF TE-ML 04D, ZF TE-ML 11, GM Dexron III-H, MAN 339 Typ V-1, Volvo 97341, ZF TE-ML 03D, ZF TE-ML 17C, Allison C4, Ford Mercon, MB 236.1, MB 236.6, MB 236.7, ZF TE-ML 14A, MAN 339 Typ Z-1
- Recommended change interval [years]: 5
- Recommended change interval [km]: 60000
- Observe system fill quantity
- Observe the vehicle manufacturer specifications
- Article number of the recommended special tool: V99-1017
- Chemical Properties: Part Synthetic Oil
- Packing Type: Bottle
- Transmission Type: for automatic transmission
- Colour: red
- Capacity [litre]: 1
- Weight [kg]: 0,93
- Height [mm]: 225
- Width [mm]: 115
- Length [mm]: 60
- Supplementary Info: Q+, original equipment manufacturer quality MADE IN GERMANY
- Item number: V60-0078
- Our price: 16,49 €
- Manufacturer: VAICO
- EAN number: 4046001355493
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
16,49 € for 1 litre
price incl. 19% VAT
excl. delivery costs
- SAE-Viskositätsklasse: ATF III
- Manufacturer recommendations: Voith H55.6335.3x, ZF TE-ML 09, ZF TE-ML 11, Volvo 97341, ZF TE-ML 14A, MB 236.1, MB 236.7, ZF TE-ML 03D, Allison C4, CAT TO-2, Ford Mercon, MAN 339 Typ V-1, MB 236.5, MB 236.6, ZF TE-ML 04D, ZF TE-ML 17C, GM Dexron III-H, MAN 339 Typ Z-1
- Recommended change interval [years]: 5
- Recommended change interval [km]: 60000
- Observe system fill quantity
- Observe the vehicle manufacturer specifications
- Article number of the recommended special tool: V99-1017
- Chemical Properties: Part Synthetic Oil
- Packing Type: Canister
- Transmission Type: for automatic transmission
- Colour: red
- Capacity [litre]: 5
- Weight [kg]: 4,492
- Height [mm]: 230
- Width [mm]: 115
- Length [mm]: 300
- Supplementary Info: Q+, original equipment manufacturer quality MADE IN GERMANY
- Item number: V60-0079
- Our price: 38,49 €
- Manufacturer: VAICO
- EAN number: 4046001355462
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Capacity [litre]: 1
- Specification: BMW DTF-1, MB 239.41, TF 0870, TF 0870 B
- Observe service information
- Item number: 170367
- Our price: 26,99 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4054224703670
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Recommended change interval [years]: 5
- Recommended change interval [km]: 60000
- Oil manufacturer recommendation: DTFR 13C170, ZF TE-ML 04D, ZF TE-ML 09, ZF TE-ML 02F, MAN 339 Typ Z1 / V1 / L1, ZF TE-ML 14A, CAT TO-2, MB 236.1, Allison TES 389, ZF TE-ML 11B, VOITH H55.6335.xx, DTFR 13C100, VOLVO 97340, Allison C-4, ATF III, Volvo 97341, ZF TE-ML 17C, MB 236.9, GM Dexron III-H, ZF TE-ML 03D, Ford Mercon
- Observe system fill quantity
- Article number of recommended accessories: V99-0009
- Observe the vehicle manufacturer specifications
- Article number of the recommended special tool: V99-1017
- Chemical Properties: Part Synthetic Oil
- Packing Type: Canister
- Colour: red
- Capacity [litre]: 20
- Weight [kg]: 19,4
- Item number: V60-0332
- Our price: 181,99 €
- Manufacturer: VAICO
- EAN number: 4062375062102
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
- Fitting Position: Rear Axle
- Brake System: ATE
- Wear Warning Contact: prepared for wear warning indicator
- Article number of recommended accessories: 82072700
- Thickness [mm]: 17,3
- Quantity Unit: Axle Set
- Height 1 [mm]: 56,8
- Height 2 [mm]: 57,8
- Width 2 [mm]: 121,8
- Width 1 [mm]: 121,8
- WVA Number: 23732
- Weight [kg]: 1,25
- Packaging length [cm]: 15,2
- Packaging width [cm]: 8,8
- Packaging height [cm]: 8,4
- Item number: 2373201
- Our price: 43,99 €
- Manufacturer: TEXTAR
- EAN number: 4019722248139
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 324
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Product line: Prime
- Brake Disc Thickness [mm]: 30
- Height [mm]: 77
- Centering Diameter [mm]: 79
- Number of Holes: 5
- Minimum thickness [mm]: 28,4
- Tightening Torque [Nm]: 120
- Item number: 09.9172.11
- Manufacturer: BREMBO
- EAN number: 8020584022726
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 324
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 30
- Centering Diameter [mm]: 79,1
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 120
- Thickness [mm]: 77
- Minimum thickness [mm]: 28,4
- Number of mounting bores: 1
- Observe service information
- Item number: 24343
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816243434
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 320
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Product line: PRO
- Brake Disc Thickness [mm]: 20
- Height [mm]: 86,1
- Centering Diameter [mm]: 75
- Hole Arrangement / Number: 05 / 06
- Wheel Bolt Bore Diameter [mm]: 14,5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 18,4
- Inner Diameter [mm]: 185
- Weight [kg]: 7,9
- Packaging length [cm]: 33,8
- Packaging width [cm]: 33,8
- Packaging height [cm]: 22
- Item number: 92202003
- Manufacturer: TEXTAR
- EAN number: 4019722454110
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article / Supplementary Info Info 2: with piston clip
- Quantity Unit: Axle Set
- Length [mm]: 155
- Width [mm]: 69
- Thickness 1 [mm]: 20
- Test Mark: ECE R90 Approved
- Observe service information
- Item number: 116031
- Our price: 29,49 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4054224160312
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article / Supplementary Info Info 2: with piston clip
- Quantity Unit: Axle Set
- Length [mm]: 155
- Width [mm]: 68
- Thickness 1 [mm]: 20
- Test Mark: ECE R90 Approved
- Observe service information
- Item number: ADB114207
- Our price: 28,99 €
- Manufacturer: BLUE PRINT
- EAN number: 5050063025675
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Diameter [mm]: 320
- Brake Disc Type: Vented
- Drilled: no
- Surface: Uncoated
- Machining: Untreated
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Brake Disc Thickness [mm]: 20
- Height [mm]: 84
- Material: Cast Iron
- Centering Diameter [mm]: 75
- Number of Holes: 5 / 6
- Wheel Bolt Bore Diameter [mm]: 14,6
- Bolt Hole Circle Ø [mm]: 120
- Item number: SKBD-0022358
- Manufacturer: STARK
- EAN number: 4059191065806
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 324
- Brake Disc Type: Vented
- Drilled: no
- Surface: Uncoated
- Machining: Untreated
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Brake Disc Thickness [mm]: 30
- Height [mm]: 77,1
- Material: Cast Iron
- Centering Diameter [mm]: 79
- Number of Holes: 5 / 6
- Wheel Bolt Bore Diameter [mm]: 14,8
- Bolt Hole Circle Ø [mm]: 120
- Item number: 82B0202
- Manufacturer: RIDEX
- EAN number: 4059191314218
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article / Supplementary Info Info 2: with piston clip
- Quantity Unit: Axle Set
- Length [mm]: 155
- Width [mm]: 68
- Thickness 1 [mm]: 20
- Test Mark: ECE R90 Approved
- Observe service information
- Item number: 16433
- Our price: 28,99 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816164333
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article / Supplementary Info Info 2: with piston clip
- Quantity Unit: Axle Set
- Length [mm]: 122
- Width [mm]: 59, 58
- Thickness 1 [mm]: 17
- Test Mark: ECE R90 Approved
- Observe service information
- Item number: 16466
- Our price: 29,49 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816164661
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Diameter [mm]: 310
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 24
- Centering Diameter [mm]: 79
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 120
- Thickness [mm]: 77
- Minimum thickness [mm]: 22,4
- Number of mounting bores: 1
- Observe service information
- Item number: 24342
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816243427
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 320
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Product line: Prime
- Brake Disc Thickness [mm]: 20
- Height [mm]: 86
- Centering Diameter [mm]: 75
- Number of Holes: 5
- Minimum thickness [mm]: 18,4
- Tightening Torque [Nm]: 120
- Item number: 09.B313.11
- Manufacturer: BREMBO
- EAN number: 8020584037102
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 324
- Brake Disc Type: Vented
- Drilled: no
- Surface: Uncoated
- Machining: Untreated
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Brake Disc Thickness [mm]: 30
- Height [mm]: 77,1
- Material: Cast Iron
- Centering Diameter [mm]: 79
- Number of Holes: 5 / 6
- Wheel Bolt Bore Diameter [mm]: 14,8
- Bolt Hole Circle Ø [mm]: 120
- Item number: SKBD-0020206
- Manufacturer: STARK
- EAN number: 4059191032082
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 324
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Product line: PRO+
- Brake Disc Thickness [mm]: 30
- Height [mm]: 77,2
- Centering Diameter [mm]: 79
- Hole Arrangement / Number: 05 / 06
- Wheel Bolt Bore Diameter [mm]: 14,7
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 28,4
- Inner Diameter [mm]: 165
- Weight [kg]: 10
- Packaging length [cm]: 34,3
- Packaging width [cm]: 34,3
- Packaging height [cm]: 11,5
- Item number: 92122605
- Manufacturer: TEXTAR
- EAN number: 4019722287374
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Brake System: ATE
- Wear Warning Contact: prepared for wear warning indicator
- Article number of recommended accessories: 82072000
- Thickness [mm]: 20,3
- Quantity Unit: Axle Set
- Height [mm]: 68,3
- Width [mm]: 155,3
- WVA Number: 23312
- Weight [kg]: 2, 2,1
- Observe mounting information
- Packaging length [cm]: 17
- Packaging width [cm]: 12
- Packaging height [cm]: 8,3
- Item number: 2331211
- Our price: 61,99 €
- Manufacturer: TEXTAR
- EAN number: 4019722311796
- Condition: New
- Fitting Position: Rear Axle
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article / Supplementary Info Info 2: with piston clip
- Quantity Unit: Axle Set
- Length [mm]: 122
- Width [mm]: 59, 58
- Thickness 1 [mm]: 17
- Test Mark: ECE R90 Approved
- Observe service information
- Item number: ADB114202
- Our price: 30,49 €
- Manufacturer: BLUE PRINT
- EAN number: 5050063005479
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.