Focus C-Max (DM2) 1.8 Timing case gasket (122 hp Petrol QQDC)
- Fitting Position: Cylinder Head
- Chemical Properties: Permanently elastic, not solvent-bearing, UV resistant
- Packing Type: Tube
- Capacity [ml]: 70
- Material: Silicone
- Temperature range from [°C]: -60
- Temperature range to [°C]: 315
- Colour: grey
- Item number: 036.164
- Our price: 5,29 €
- Manufacturer: ELRING
- EAN number: 4041248441619
- Condition: New
75,57 € for 1 litre
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Cylinder Head
- Chemical Properties: Permanently elastic, not solvent-bearing, UV resistant
- Packing Type: Tube
- Capacity [ml]: 70
- Material: Silicone
- Temperature range from [°C]: -60
- Temperature range to [°C]: 315
- Colour: grey
- Item number: 527.291
- Our price: 5,29 €
- Manufacturer: ELRING
- EAN number: 4041248845622
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Chemical Properties: not solvent-bearing
- Packing Type: Tube
- Capacity [ml]: 75
- Material: Silicone
- Temperature range from [°C]: -60
- Temperature range to [°C]: 300
- Supplementary Article / Supplementary Info Info 2: not contained in set
- Colour: black
- Item number: 75000200
- Our price: 9,29 €
- Manufacturer: AJUSA
- EAN number: 8427769999161
- Condition: New
- Chemical Properties: not solvent-bearing
- Packing Type: Cartridge
- Capacity [ml]: 200
- Material: Silicone
- Temperature range from [°C]: -60
- Temperature range to [°C]: 300
- not for country specific design: USA
- Supplementary Article / Supplementary Info Info 2: not contained in set
- Colour: black
- Item number: 75000100
- Our price: 22,49 €
- Manufacturer: AJUSA
- EAN number: 8427769920202
- Condition: New
- Weight [g]: 16
- Item number: 4.20203
- Our price: 7,59 €
- Manufacturer: DT Spare Parts
- EAN number: 4047755906047
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 265
- Brake Disc Type: solid
- Drilled: no
- Brake Disc Thickness [mm]: 10,9
- Height [mm]: 40,7
- Centering Diameter [mm]: 63,5
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 108
- Minimum thickness [mm]: 10
- Thread Size: 13,75
- suitable for rim size [inch]: 15, 16
- Item number: C4G009ABE
- Manufacturer: ABE
- EAN number: 5900427205543
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 278
- Brake Disc Type: Vented
- Drilled: no
- Surface: Oiled
- Alternatively
- Brake Disc Thickness [mm]: 25
- Height [mm]: 48,5
- Centering Diameter [mm]: 63,6
- Number of Holes: 5
- Minimum thickness [mm]: 23
- Item number: BG3868
- Manufacturer: DELPHI
- EAN number: 5012759308875
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 265
- Brake Disc Type: solid
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness [mm]: 11
- Height [mm]: 40,8
- Centering Diameter [mm]: 63,5
- Number of Holes: 5
- Minimum thickness [mm]: 9
- Test Mark: E1 90R-02C0967 / 2529
- Item number: BG3896
- Manufacturer: DELPHI
- EAN number: 5012759309155
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 265
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 11
- Centering Diameter [mm]: 72
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 114
- Thickness [mm]: 41
- Minimum thickness [mm]: 9
- Weight [kg]: 4,240
- Observe service information
- Item number: ADM543115
- Manufacturer: BLUE PRINT
- EAN number: 5050063009040
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 278
- Brake Disc Type: internally vented
- Drilled: no
-
- Brake Size: 15"
- Rim Size [inch]: 15.0
- Brake Disc Thickness [mm]: 25
- Height [mm]: 48,5
- Centering Diameter [mm]: 63,6
- Number of Holes: 5
- Minimum thickness [mm]: 23
- Item number: F1009V
- Manufacturer: LPR
- EAN number: 8032928003025
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 280
- Brake Disc Type: solid
- Drilled: no
-
- Brake Size: 17", 16"
- Rim Size [inch]: 16.0, 17.0
- Brake Disc Thickness [mm]: 11
- Number of Holes: 5
- Minimum thickness [mm]: 9
- Item number: F1010P
- Manufacturer: LPR
- EAN number: 8032928082150
- Condition: New
price incl. 19% VAT
- Fitting Position: Rear Axle
- Diameter [mm]: 280
- Brake Disc Type: solid
- Drilled: no
- Rim Size [inch]: 17.0, 16.0
- Supplementary Info: Original VAICO Quality
- Brake Disc Thickness [mm]: 11
- Height [mm]: 40,8
- Centering Diameter [mm]: 63,5
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 108
- Minimum thickness [mm]: 9
- Weight [kg]: 5,19
- Brake Disc Hub Height [mm]: 29,85
- Packaging width [cm]: 30
- Packaging height [cm]: 9
- Packaging Depth [cm]: 30
- fulfils ECE norm: R90
- Item number: V25-40009
- Manufacturer: VAICO
- EAN number: 4046001551987
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Diameter [mm]: 265
- Brake Disc Type: solid
- Drilled: no
- Rim Size [inch]: 15.0
- Supplementary Info: Original VAICO Quality
- Brake Disc Thickness [mm]: 11
- Height [mm]: 40,8
- Centering Diameter [mm]: 63,5
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 108
- Minimum thickness [mm]: 9
- Brake Disc Hub Height [mm]: 29,7
- Packaging width [cm]: 28
- Packaging height [cm]: 9
- Packaging Depth [cm]: 28
- Item number: V25-40011
- Manufacturer: VAICO
- EAN number: 4046001550041
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle
- Diameter [mm]: 320
- Brake Disc Type: Vented
- Drilled: no
- Rim Size [inch]: 16.0, 17.0
- Supplementary Info: Original VAICO Quality
- Brake Disc Thickness [mm]: 25
- Height [mm]: 48,7
- Centering Diameter [mm]: 63,5
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 108
- Minimum thickness [mm]: 23
- Brake Disc Hub Height [mm]: 23,5
- Packaging width [cm]: 32
- Packaging height [cm]: 10
- Packaging Depth [cm]: 32
- Item number: V25-80022
- Manufacturer: VAICO
- EAN number: 4046001550621
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Brake System: ATE
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 18,1
- Quantity Unit: Axle Set
- Height 1 [mm]: 62,4
- Height 2 [mm]: 67,0
- Width 2 [mm]: 156,3
- Width 1 [mm]: 155,1
- Test Mark: E1 90R-02A0334 / 0371, E9 90R-02A1162 / 0947
- MAPP code available
- Item number: 13.0460-7193.2
- Our price: 44,49 €
- Manufacturer: ATE
- EAN number: 4006633126410
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Drilled: no
- Brake Disc Thickness [mm]: 25
- Height [mm]: 48,5
- Centering Diameter [mm]: 63,5
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 108
- Minimum thickness [mm]: 23
- Inner Diameter [mm]: 140
- suitable for rim size [inch]: 17
- Bore Diameter [mm]: 13,7
- Item number: 25818
- Manufacturer: MAPCO
- EAN number: 4043605445766
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Drilled: no
- Brake Disc Thickness [mm]: 25
- Height [mm]: 48,5
- Centering Diameter [mm]: 63,5
- Number of Holes: 5
- Thickness [mm]: 25
- Minimum thickness [mm]: 23
- suitable for rim size [inch]: 17
- Wear Warning Contact: incl. wear warning contact, with integrated wear warning contact
- Item number: C3V023ABE
- Manufacturer: ABE
- EAN number: 5901655214116
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Drilled: no
-
- Brake Size: 17", 16"
- Rim Size [inch]: 16.0, 17.0
- Brake Disc Thickness [mm]: 25
- Height [mm]: 48,5
- Centering Diameter [mm]: 63,5
- Number of Holes: 5
- Minimum thickness [mm]: 23
- Item number: F1012V
- Manufacturer: LPR
- EAN number: 8032928003452
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 265
- Brake Disc Type: solid
- Drilled: no
- Brake Disc Thickness [mm]: 11
- Height [mm]: 40,8
- Centering Diameter [mm]: 63
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 108
- Minimum thickness [mm]: 9
- Item number: BDC5505
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438087420
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Brake System: ATE
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 16,6
- Quantity Unit: Axle Set
- Height [mm]: 52,0
- Width [mm]: 123,0
- Test Mark: E9 90R-02A1382 / 2272
- MAPP code available
- Observe mounting information
- Item number: 13.0460-7195.2
- Our price: 34,49 €
- Manufacturer: ATE
- EAN number: 4006633149839
- Condition: New
Replaces brake pad with springs with retroactive effect. See item picture for further information.