VAUXHALL Omega (B) Saloon (V94) 2.6 V6 Fuel pump relay (180 hp Petrol Y 26 SE)
- Rated Voltage [V]: 12
- Current Strength [A]: 70
- Number of connectors: 4
- Relay function: X contact relief, Pre-glow device, Normally open contact
- Item number: 109 544
- Our price: 4,96 €
- Manufacturer: TOPRAN
- EAN number: 9512530000012
- Condition: New
Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- TecDoc Engine Number: Y 26 SE
- Voltage [V]: 12
- Current Strength [A]: 70
- Number of connectors: 4
- Weight [kg]: 0,04
- Supplementary Info: Original VEMO Quality
- Packaging width [cm]: 2,6
- Packaging height [cm]: 2,6
- Packaging Depth [cm]: 4
- Item number: V40-71-0005
- Our price: 10,49 €
- Manufacturer: VEMO
- EAN number: 4046001494895
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- TecDoc Engine Number: Y 26 SE
- Voltage [V]: 12
- Current Strength [A]: 50
- Weight [kg]: 0,04
- Number of pins: 4
- Packaging Depth [cm]: 4
- Item number: 1111R0034
- Our price: 11,73 €
- Manufacturer: RIDEX
- EAN number: 4059191996544
- Condition: New
- Rated Voltage [V]: 12
- Current Strength [A]: 50
- Number of pins: 4
- for OE number: 62 38 543
- Connector type: 2 x 6,3 mm, 2 x 9,5 mm
- Combi Switch Function: Normally Open Contact
- Width [mm]: 26,2
- Height [mm]: 25,0
- Depth [mm]: 26,2
- Supplementary Article / Supplementary Info Info 2: with resistor, with retaining strap
- Temperature range from [°C]: -40
- Temperature range to [°C]: +85
- Item number: 75614617
- Our price: 13,23 €
- Manufacturer: HERTH+BUSS ELPARTS
- EAN number: 4026736409609
- Condition: New
- Current Strength [A]: 70
- Number of connectors: 4
- Relay function: Normally open contact, Pre-glow device, X contact relief
- Combi Switch Function: Normally Open Contact
- Width [mm]: 26,2
- Height [mm]: 25
- Depth [mm]: 26,2
- Supplementary Article / Supplementary Info Info 2: with resistor, with retaining strap
- Temperature range to [°C]: +85
- Item number: 1299201100
- Our price: 16,11 €
- Manufacturer: JP GROUP
- EAN number: 5710412168247
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 296
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 28
- Height [mm]: 58,3
- Centering Diameter [mm]: 70
- Number of Holes: 5
- Thickness [mm]: 28
- Minimum thickness [mm]: 25
- Machining: High-carbon
- Drilled: no
- Item number: C3X016ABE
- Manufacturer: ABE
- EAN number: 5900427202177
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 286
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Height [mm]: 67
- Centering Diameter [mm]: 65,5
- Number of Holes: 5
- Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Vehicle Identification Number (VIN) to: Y1999999
- Drilled: no
- Item number: C4X007ABE
- Manufacturer: ABE
- EAN number: 5900427206892
- Condition: New
-
- Fitting Position: Front Axle
- Brake System: TRW
- Diameter [mm]: 296
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 28
- Height [mm]: 58,5
- Surface: Oiled
- Centering Diameter [mm]: 70
- Number of Holes: 5
- Minimum thickness [mm]: 26
- Test Mark: E1 90R-02C0074 / 1085
- Drilled: no
- Item number: BG2742
- Manufacturer: DELPHI
- EAN number: 5012759426968
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Brake Disc Type: internally vented
- Engine Number from: 11000001
- Diameter [mm]: 285,9
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 20
- Height [mm]: 69,3
- Surface: Oiled
- Centering Diameter [mm]: 65,5
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110
- Minimum thickness [mm]: 18
- Bore Diameter up to [mm]: 14,4
- Drilled: no
- Item number: 0 986 479 394
- Manufacturer: BOSCH
- EAN number: 4047024393424
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 286
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Height [mm]: 69,3
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110
- Minimum thickness [mm]: 10
- Drilled: no
- Item number: BDC4581
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593353961
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 09 / 2000
- Fitting Position: Rear Axle
- Diameter [mm]: 286,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 20,0
- Height [mm]: 67
- Surface: Coated
- Centering Diameter [mm]: 65,5
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110,0
- Minimum thickness [mm]: 18,0
- Inner Diameter [mm]: 160,0
- MAPP code available
- Bore Diameter [mm]: 14,0
- Drilled: no
- Item number: 24.0120-0171.1
- Manufacturer: ATE
- EAN number: 4006633080842
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 09 / 2000
- Fitting Position: Front Axle
- Diameter [mm]: 296,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 28,0
- Height [mm]: 58,4
- Surface: Coated
- Centering Diameter [mm]: 70,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110,0
- Minimum thickness [mm]: 25,0
- Inner Diameter [mm]: 139,0
- Machining: Alloyed / High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0115 / 0035
- Bore Diameter [mm]: 14,0
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0128-0104.1
- Manufacturer: ATE
- EAN number: 4006633143332
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Brake System: Lucas-Girling
- Material: Low-Metallic
- Supplementary Article / Supplementary Info: with accessories
- Quantity Unit: Axle Set
- Height [mm]: 64,2
- Width [mm]: 129,9
- Thickness 1 [mm]: 18,3
- Thickness 2 [mm]: 19
- WVA Number: 21368
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate, with bolts / screws
- Article number of recommended accessories: 1987474126, 1987474210, 1987474241, 1987474579, 1987474971, 1987474922, 1987474933, 1987474934, 1987474921
- Number of bolts / screws: 2
- Observe technical data
- Item number: 0 986 460 939
- Our price: 28,09 €
- Manufacturer: BOSCH
- EAN number: 3165143210222
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Vehicle Identification Number (VIN) to: Y1999999
- Diameter [mm]: 286
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Height [mm]: 69,2
- Surface: Oiled
- Centering Diameter [mm]: 65,5
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110
- Minimum thickness [mm]: 10
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 14,2
- Drilled: no
- Item number: 0 986 478 609
- Manufacturer: BOSCH
- EAN number: 3165143052785
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Brake System: Teves
- Diameter [mm]: 285
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Height [mm]: 70
- Surface: Oiled
- Centering Diameter [mm]: 66
- Number of Holes: 5
- Minimum thickness [mm]: 10
- Test Mark: E1 90R-02C0100 / 1554
- Drilled: no
- Item number: BG2986
- Manufacturer: DELPHI
- EAN number: 5012759960073
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 296
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 28
- Height [mm]: 58,3
- Centering Diameter [mm]: 70
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110
- Minimum thickness [mm]: 25
- Drilled: no
- Item number: BDC4439
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593295056
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 09 / 2000
- Fitting Position: Front Axle
- Brake System: Lucas / TRW
- Wear Warning Contact: excl. wear warning contact
- Thickness [mm]: 18,3
- Quantity Unit: Axle Set
- Height [mm]: 63,8
- Width [mm]: 129,9
- Test Mark: E1 90R-01054 / 349
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Article number of recommended accessories: 24.8190-0711.2, 24.8190-0716.2
- Number of bolts / screws: 2
- Observe dimensions
- Item number: 13.0460-2815.2
- Our price: 42,15 €
- Manufacturer: ATE
- EAN number: 4006633281164
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 09 / 2000
- Fitting Position: Rear Axle
- Brake System: ATE
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 15,8
- Quantity Unit: Axle Set
- Height [mm]: 61,2
- Width [mm]: 61,6
- Test Mark: E9 90R-02A1382 / 1350
- MAPP code available
- Article number of recommended accessories: 13.0460-0198.2, 13.0460-0246.2, 13.0460-0347.2
- Observe dimensions
- Item number: 13.0460-4040.2
- Our price: 23,18 €
- Manufacturer: ATE
- EAN number: 4006633116886
- Condition: New
-
- Construction Year from: 09 / 2000
- Fitting Position: Rear Axle
- Diameter [mm]: 286,0
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12,0
- Height [mm]: 69,5
- Surface: Coated
- Centering Diameter [mm]: 65,5
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110,0
- Minimum thickness [mm]: 10,0
- Inner Diameter [mm]: 160,0
- MAPP code available
- Test Mark: E1 90R-02C0248 / 0737
- Bore Diameter [mm]: 14,0
- Drilled: no
- Item number: 24.0112-0131.1
- Manufacturer: ATE
- EAN number: 4006633143271
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 296
- Brake Disc Type: Vented, internally vented
- Brake Disc Thickness [mm]: 28
- Height [mm]: 58,3
- Surface: Oiled
- Centering Diameter [mm]: 70
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110
- Minimum thickness [mm]: 25
- Machining: Alloyed / High-carbon
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 14,2
- Drilled: no
- Item number: 0 986 478 593
- Manufacturer: BOSCH
- EAN number: 4047024094406
- Condition: New
price incl. 19% VAT
excl. delivery costs