Vehicle identification number: 0588BKH
Audi Q5 FY 2.0 TFSI quattro Fuel filter (252 hp Petrol DAXB)
Recommended part replacement interval for your car for the part category Fuel filter: every 15.000 km / every 12 months
- Filter type: Filter Insert
- Height [mm]: 133
- Diameter [mm]: 70
- Inner Diameter [mm]: 44
- Supplementary Article / Supplementary Info Info 2: with seal ring
- Observe service information
- Gasket inside diameter [mm]: 71,8
- Gasket outside diameter [mm]: 77
- Item number: ADBP230051
- Our price: 25,49 €
- Manufacturer: BLUE PRINT
- EAN number: 5057746328504
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Filter type: Pre-Filter
- Version: UNIVERSAL
- for OE number: 5106
- Item number: 5106
- Our price: 69,99 €
- Manufacturer: MEAT & DORIA
- EAN number: 808888974708
- Condition: New
- Filter type: In-Line Filter
- Diameter [mm]: 52, 8 / 8
- Height [mm]: 181
- for OE number: 4035 / 8
- Item number: 4035/8
- Our price: 10,99 €
- Manufacturer: MEAT & DORIA
- EAN number: 803341917211
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- for PR number: 1KD
- Brake Disc Type: solid
- Drilled: no
- Supplementary Info: Original VAICO Quality
- Brake Disc Thickness [mm]: 12
- Height [mm]: 36,4
- Centering Diameter [mm]: 68
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 10
- Brake Disc Hub Height [mm]: 24,3
- Packaging width [cm]: 32
- Packaging height [cm]: 8
- Packaging Depth [cm]: 32
- Item number: V10-40083
- Manufacturer: VAICO
- EAN number: 4046001377662
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Diameter [mm]: 330,0
- for PR number: 1KF, 1KJ, 1KK, 2EJ, 1KU, 1KW
- Construction Year from: 01 / 2020
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Brake Disc Thickness [mm]: 21,9
- Height [mm]: 36
- Centering Diameter [mm]: 68,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 20,0
- Inner Diameter [mm]: 147,7
- MAPP code available
- Test Mark: E1 90R-02C0115 / 0603
- Bore Diameter [mm]: 15,3
- Item number: 24.0122-0272.1
- Manufacturer: ATE
- EAN number: 4006633381420
- Condition: New
price incl. 19% VAT
- Fitting Position: Rear Axle
- Brake System: TRW
- Wear Warning Contact: not prepared for wear warning indicator
- Thickness [mm]: 17,5
- Quantity Unit: Axle Set
- Height [mm]: 58,8
- Width [mm]: 116,4
- Number of pads: 4
- Item number: C2A005ABE
- Our price: 18,99 €
- Manufacturer: ABE
- EAN number: 5900427192744
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 330
- for PR number: 1KF, 1KJ, 1KK, 1KU, 1KW, 2EJ
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 22
- Height [mm]: 36,4
- Centering Diameter [mm]: 68
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Hub Diameter [mm]: 166
- Replace in pairs only
- Item number: 113 012
- Manufacturer: TOPRAN
- EAN number: 6155980000022
- Condition: New
Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
price incl. 19% VAT
- Fitting Position: Rear Axle
- Diameter [mm]: 330
- for PR number: 1KF, 1KJ
- Brake Disc Type: Vented
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness [mm]: 22
- Height [mm]: 37,9
- Centering Diameter [mm]: 67,9
- Rim Hole Number: 5
- Minimum thickness [mm]: 20
- Net weight [kg]: 7,82
- Item number: 2047156
- Manufacturer: NK
- EAN number: 5703858756819
- Condition: New
price incl. 19% VAT
- Fitting Position: Rear Axle
- Diameter [mm]: 330
- for PR number: 1KF, 1KJ
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Product line: COATED
- Brake Disc Thickness [mm]: 22
- Height [mm]: 36,4
- Number of Holes: 5
- Minimum thickness [mm]: 20
- Manufacturer Restriction: TRW
- Item number: 8120 291044C
- Manufacturer: TRISCAN
- EAN number: 5710476051059
- Condition: New
price incl. 19% VAT
- Fitting Position: Rear Axle
- Diameter [mm]: 330
- for PR number: 1KF, 1KJ, 1KK, 2EJ, 1KU, 1KW
- Construction Year from: 01 / 2020
- Brake Disc Type: Vented
- Drilled: no
- Supplementary Info: Original VAICO Quality
- Brake Disc Thickness [mm]: 21,9
- Height [mm]: 36
- Centering Diameter [mm]: 68
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Brake Disc Hub Height [mm]: 14,1
- Packaging width [cm]: 34
- Packaging height [cm]: 8
- Packaging Depth [cm]: 34
- Item number: V10-80112
- Manufacturer: VAICO
- EAN number: 4046001621987
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Paired product: 573628J, 574176J
- Diameter [mm]: 330
- Brake System: TRW
- for PR number: 1KF, 1KJ
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Brake Disc Thickness [mm]: 22
- Height [mm]: 36,5
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Hole Arrangement / Number: 5+1
- Minimum thickness [mm]: 20
- Weight [kg]: 15,99
- Number of mounting bores: 1
- Version: JC
- Packing Type: Box
- Packaging length [cm]: 34,5
- Packaging width [cm]: 34,5
- Packaging height [cm]: 10
- Item number: 562735JC
- Manufacturer: JURID
- EAN number: 3306437233156
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Brake System: LUCAS-GIRLING
- for PR number: 1KW, 2EK, 1KE, 2EL
- Vehicle Identification Number (VIN) to: 8R-H-150 000
- Supplementary Article / Supplementary Info: Photo corresponds to scope of supply
- Thickness [mm]: 18
- Quantity Unit: Axle Set
- Height [mm]: 59
- Width [mm]: 116
- Test Mark: ECE R90 APPROVED
- Item number: 24606.175.1
- Our price: 45,49 €
- Manufacturer: ZIMMERMANN
- EAN number: 4250238746379
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 330
- for PR number: 1KF, 1KJ, 1KK
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Product line: COATED
- Brake Disc Thickness [mm]: 22
- Height [mm]: 35,8
- Centering Diameter [mm]: 68
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Hub Diameter [mm]: 162
- Weight [kg]: 7,82
- Item number: 18196
- Manufacturer: A.B.S.
- EAN number: 8717109528107
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 330
- for PR number: 1KF, 1KJ, 1KK, 1KU, 1KW, 2EJ
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- TecDoc Engine Number: DAXB, DAYB
- Brake Disc Thickness [mm]: 22
- Height [mm]: 36,2
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 15,1
- Item number: 0 986 479 750
- Manufacturer: BOSCH
- EAN number: 4047024887084
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 330
- for PR number: 1KF, 1KJ, 1KK, 1KE, 2EL, 2EJ
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Product line: COAT Z
- Brake Disc Thickness [mm]: 22
- Height [mm]: 36
- Centering Diameter [mm]: 68
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Weight [kg]: 7,5
- Test Mark: ECE R90 APPROVED
- Item number: 100.3358.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238750611
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 330
- for PR number: 1KE, 2EL, 2EJ, 1KF, 1KJ, 1KK
- Brake Disc Type: internally vented, Perforated
- Drilled: yes
- Surface: Coated
- Machining: High-carbon
- Product line: SPORT COAT Z
- Brake Disc Thickness [mm]: 22
- Height [mm]: 36
- Centering Diameter [mm]: 68
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Weight [kg]: 7,5
- Test Mark: ECE R90 APPROVED
- Item number: 100.3358.52
- Manufacturer: ZIMMERMANN
- EAN number: 4250238752912
- Condition: New
price incl. 19% VAT
- Fitting Position: Rear Axle
- Diameter [mm]: 330
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
-
- not for PR number: 1KD
- TecDoc Engine Number: DAXB
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 68
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Number of mounting bores: 1
- for OE number: 8K0 615 601 C
- Observe service information
- old version
- Item number: 36454
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816364542
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 299,9
- Brake Disc Type: solid
- Drilled: no
- Brake Disc Thickness [mm]: 12
- Height [mm]: 36,2
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Minimum thickness [mm]: 10
- Item number: C4A025ABE
- Manufacturer: ABE
- EAN number: 5900427204652
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 330
- Brake Disc Type: Vented
- Drilled: no
- Brake Disc Thickness [mm]: 21,9
- Height [mm]: 36
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Inner Diameter [mm]: 147,7
- Item number: C4A032ABE
- Manufacturer: ABE
- EAN number: 5900427204720
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 330
- for PR number: 1KF, 1KJ, 1KK, 1KW, 1KU, 2EJ
- Brake Disc Type: Vented
- Drilled: no
- Surface: Painted
- Machining: High-carbon
- Brake Disc Thickness [mm]: 22
- Height [mm]: 36,2
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Colour: black
- Test Mark: E190R-02C0176 / 0577
- Item number: DF6175S
- Manufacturer: TRW
- EAN number: 3322938162634
- Condition: New
What does fuel filter replacement cost for the AUDI Q5 (FYB) 2.0TFSI quattro 252hp / 185kW?
Estimated replacement cost:
Labour: from 80 to 250 pounds.
How long does it take to change the fuel filter on the AUDI Q5 (FYB) 2.0TFSI quattro 252hp / 185kW?
Changing the fuel filter can take 15 to 30 minutes.