Audi A3 8V7 1.8 TFSI quattro Fuel filter (180 hp Petrol CJSB)
Recommended part replacement interval for your car for the part category Fuel filter: every 15.000 km / every 12 months
- Filter type: Pre-Filter
- Version: UNIVERSAL
- for OE number: 5106
- Item number: 5106
- Our price: 45,80 €
- Manufacturer: MEAT & DORIA
- EAN number: 808888974708
- Condition: New
- for PR number: 1E7
- Filter type: without quick coupling
- Item number: V10-6890
- Our price: 26,41 €
- Manufacturer: VAICO
- EAN number: 4062375286713
- Condition: New
- Filter type: In-Line Filter
- Diameter [mm]: 52, 8 / 8
- Height [mm]: 181
- for OE number: 4035 / 8
- Item number: 4035/8
- Our price: 12,50 €
- Manufacturer: MEAT & DORIA
- EAN number: 803341917211
- Condition: New
-
- Fitting Position: Rear Axle
- for PR number: 1KE, 1KR
- paired article number: FDB4434
- Diameter [mm]: 272
- Brake Disc Type: solid
- Product line: PREMIER
- Brake Disc Thickness [mm]: 10
- Height [mm]: 48
- Surface: Oiled
- Centering Diameter [mm]: 65
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 9
- Weight [kg]: 6,2
- Tightening Torque [Nm]: 120
- Test Mark: R90 homologated
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Packing Type: Box
- Packaging length [cm]: 27,5
- Packaging width [cm]: 27,5
- Packaging height [cm]: 10,5
- Drilled: no
- Item number: DDF1895
- Manufacturer: FERODO
- EAN number: 4044197541324
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- for PR number: 1ZD
-
- Fitting Position: Front Axle
- for PR number: 1ZA
- Diameter [mm]: 312
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Height [mm]: 49,9
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Inner Diameter [mm]: 146
- Machining: High-carbon
- No. of holes 2: 9
- Bore Diameter [mm]: 15,3
- Drilled: no
- Item number: 25833
- Manufacturer: MAPCO
- EAN number: 4043605415516
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- for PR number: 1ZA, 1ZD
- Diameter [mm]: 312
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Height [mm]: 49,9
- Surface: Oiled
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 22
- Test Mark: E1 90R-02C0277 / 1198
- Drilled: no
- Item number: BG3953
- Manufacturer: DELPHI
- EAN number: 5012759360545
- Condition: New
-
- Fitting Position: Rear Axle
- for PR number: 1KY
- Diameter [mm]: 310
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48,5
- Surface: Oiled
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 20
- Test Mark: E1 90R-02C0289 / 1665
- Drilled: no
- Item number: BG3975
- Manufacturer: DELPHI
- EAN number: 5012759370155
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- for PR number: 1ZE, 1ZP
- Diameter [mm]: 288
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 25
- Height [mm]: 49,5
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 22
- Drilled: no
- Item number: A1002V
- Manufacturer: LPR
- EAN number: 8032532092255
- Condition: New
price incl. 19% VAT
-
- Construction Year from: 04 / 2015
- for PR number: 1ZA, 1ZD
- Diameter [mm]: 312
- Brake Disc Type: Vented
- Supplementary Info: ORIGINAL Quality
- Brake Disc Thickness [mm]: 25
- Fitting Position: Front Axle
- Height [mm]: 49,9
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Required quantity: 2
- Drilled: no
- Item number: 115 521 1094
- Manufacturer: MEYLE
- EAN number: 4040074429006
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- for PR number: 1KE, 1KR
- Diameter [mm]: 272
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Height [mm]: 48,3
- Surface: Oiled
- Centering Diameter [mm]: 65
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 8
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 15,3
- Drilled: no
- Item number: 0 986 479 677
- Manufacturer: BOSCH
- EAN number: 4047024749801
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 272
- Brake Disc Type: solid
- Supplementary Info: Original VAICO Quality
- for PR number: 1KE
- Brake Disc Thickness [mm]: 9,7
- Fitting Position: Rear Axle
- Height [mm]: 48,2
- Centering Diameter [mm]: 65
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 8
- Brake Disc Hub Height [mm]: 38,2
- Packaging width [cm]: 28
- Packaging height [cm]: 10
- Packaging Depth [cm]: 28
- Drilled: no
- Item number: V10-40086
- Manufacturer: VAICO
- EAN number: 4046001550584
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
- for PR number: 1ZA, 1ZD
- Fitting Position: Front Axle
- Diameter [mm]: 312,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25,0
- Height [mm]: 49,9
- Surface: Coated
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 22,0
- Inner Diameter [mm]: 146,0
- Machining: High-carbon
- MAPP code available
- No. of holes 2: 9
- Test Mark: E1 90R-02C0115 / 1001
- Bore Diameter [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0125-0158.1
- Manufacturer: ATE
- EAN number: 4006633209489
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- for combined PR number: 1KJ+1KY
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48,5
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Inner Diameter [mm]: 169
- Bore Diameter [mm]: 15,3
- Drilled: no
- Item number: 25842
- Manufacturer: MAPCO
- EAN number: 4043605445797
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 312
- Brake Disc Type: Vented
- for PR number: 1ZA, 1ZD
- Brake Disc Thickness [mm]: 25,0
- Fitting Position: Front Axle
- Height [mm]: 49,9
- Surface: Coated
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Inner Diameter [mm]: 146
- Machining: High-carbon
- No. of holes 2: 9
- Bore Diameter [mm]: 15,3
- Drilled: no
- Item number: C3W039ABE
- Manufacturer: ABE
- EAN number: 5901655214055
- Condition: New
-
- Fitting Position: Front Axle
- for PR number: 1ZA, 1ZD
- Diameter [mm]: 312
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 25
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 22
- for article number: A1004V
- Drilled: no
- Item number: A1004V
- Manufacturer: LPR
- EAN number: 8032532102671
- Condition: New
-
- Fitting Position: Rear Axle
- for PR number: 1KJ, 1KY
- Diameter [mm]: 310
- Brake Disc Type: internally vented
- Brake System: ATE
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48,4
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 20
- Drilled: no
- Item number: A1014V
- Manufacturer: LPR
- EAN number: 8032928002936
- Condition: New
price incl. 19% VAT
- Diameter [mm]: 312
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Fitting Position: Front Axle
- Height [mm]: 50
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Drilled: no
- Item number: BDC5416
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438069259
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Height [mm]: 50
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Drilled: no
- Item number: BDC5418
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593840775
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- for PR number: 1KJ, 1KY, 1KZ
- Vehicle Equipment: for vehicles with electric parking brake
- Fitting Position: Rear Axle
- Diameter [mm]: 310,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22,0
- Height [mm]: 48,5
- Surface: Coated
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 20,0
- Inner Diameter [mm]: 169,0
- Machining: High-carbon
- MAPP code available
- No. of holes 2: 9
- Test Mark: E1 90R-02C0118 / 0945
- Bore Diameter [mm]: 15,3
- Drilled: no
- Item number: 24.0122-0219.1
- Manufacturer: ATE
- EAN number: 4006633229630
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- for PR number: 1ZE, 1ZP
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25,0
- Height [mm]: 49,9
- Surface: Coated
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 22,0
- Inner Diameter [mm]: 144,0
- Machining: High-carbon
- MAPP code available
- No. of holes 2: 9
- Test Mark: E1 90R-02C0115 / 0010
- Bore Diameter [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0125-0145.1
- Manufacturer: ATE
- EAN number: 4006633113472
- Condition: New
price incl. 19% VAT
excl. delivery costs
What does fuel filter replacement cost for the AUDI A3 Convertible (8V7, 8VE) 1.8TFSI quattro 180hp / 132kW?
Estimated replacement cost:
Labour: from 80 to 250 pounds.
How long does it take to change the fuel filter on the AUDI A3 Convertible (8V7, 8VE) 1.8TFSI quattro 180hp / 132kW?
Changing the fuel filter can take 15 to 30 minutes.