Vehicle identification number: 9101811
Volvo v70 1 2.4 Turbo AWD Radiator support (265 hp Petrol B 5244 T2)
- Panel Type: Full Body Section
- Weight [kg]: 2,9
- Item number: VV0403210
- Our price: 513,50 €
- Manufacturer: PRASCO
- EAN number: 8033533020339
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
- Fitting Position: Front
- Panel Type: Full Body Section
- Item number: L01805
- Our price: 278,50 €
- Manufacturer: EQUAL QUALITY
- EAN number: 8051837134446
- Condition: New
- Panel Type: Full Body Section
- Item number: 5930668
- Our price: 322,50 €
- Manufacturer: VAN WEZEL
- EAN number: 5410909173081
- Condition: New
- Panel Type: Full Body Section
- Section: Upper section
- Item number: 9037200
- Our price: 359,00 €
- Manufacturer: KLOKKERHOLM
- EAN number: 2278104726550
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 302
- Brake Disc Type: Vented
- Drilled: no
- Surface: Oiled
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
-
- Rim Size [inch]: 16
- Alternatively
- Product line: PREMIER
- Brake Disc Thickness [mm]: 26
- Height [mm]: 50,3
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 108
- Minimum thickness [mm]: 23
- Weight [kg]: 14,66
- Tightening Torque [Nm]: 110
- Test Mark: R90 homologated
- Packing Type: Box
- Packaging length [cm]: 30
- Packaging width [cm]: 30
- Packaging height [cm]: 11
- Item number: DDF1031
- Manufacturer: FERODO
- EAN number: 5016687209891
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 285,5
- Construction Year from: 10 / 1999
- Brake Disc Type: Vented
- Drilled: no
- Wheel Diameter [inch]: 15
- Brake Disc Thickness [mm]: 26
- Height [mm]: 62
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 108
- Minimum thickness [mm]: 23
- Thread Size: 16,5
- Item number: 15999
- Manufacturer: MAPCO
- EAN number: 4043605420282
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 280
- Construction Year to: 02 / 2000
- Brake Disc Type: Vented
- Drilled: no
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Rim Size [inch]: 15
- Brake Disc Thickness [mm]: 26
- Height [mm]: 50,3
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Thickness [mm]: 26
- Minimum thickness [mm]: 23
- Wear Warning Contact: incl. wear warning contact, with integrated wear warning contact
- Item number: C3V017ABE
- Manufacturer: ABE
- EAN number: 5900427201545
- Condition: New
price incl. 19% VAT
- Fitting Position: Front Axle
- Diameter [mm]: 302
- Construction Year to: 02 / 2000
- Brake Disc Type: Vented
- Drilled: no
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Rim Size [inch]: 16
- Brake Disc Thickness [mm]: 26
- Height [mm]: 50,3
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Thickness [mm]: 26
- Minimum thickness [mm]: 23
- Item number: C3V018ABE
- Manufacturer: ABE
- EAN number: 5900427201552
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 285,5
- Construction Year from: 10 / 1999
- Brake Disc Type: Vented
- Drilled: no
- Wheel Diameter [inch]: 15
- Brake Disc Thickness [mm]: 26
- Height [mm]: 62
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 108
- Minimum thickness [mm]: 23
- Thread Size: 16,5
- Item number: C3V019ABE
- Manufacturer: ABE
- EAN number: 5901655214161
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 288
- Construction Year to: 03 / 2000
- Brake Disc Type: solid
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness [mm]: 12
- Height [mm]: 64,7
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Minimum thickness [mm]: 10
- Test Mark: E1 90R-02C0967 / 2532
- Item number: BG3515
- Manufacturer: DELPHI
- EAN number: 5012759140482
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 305
- Brake Disc Type: Vented
- Drilled: no
- Surface: Oiled
- Rim Size [inch]: 16
- Brake Disc Thickness [mm]: 28
- Height [mm]: 50,2
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Minimum thickness [mm]: 25
- Test Mark: E1 90R-02C0289 / 1614
- Item number: BG9514
- Manufacturer: DELPHI
- EAN number: 5012759227572
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 286
- Brake System: ATE
- Construction Year to: 03 / 2000
- Construction Year from: 10 / 1999
- Drilled: no
- Rim Size [inch]: 15.0
- Brake Disc Thickness [mm]: 26
- Height [mm]: 50,2
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Minimum thickness [mm]: 23
- Item number: V1484V
- Manufacturer: LPR
- EAN number: 8032532088593
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 288
- Vehicle Identification Number (VIN) from: 587426
- Brake Disc Type: solid
- Drilled: no
- Supplementary Info: Original VAICO Quality
- Brake Disc Thickness [mm]: 12
- Height [mm]: 62
- Centering Diameter [mm]: 68
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 108
- Minimum thickness [mm]: 10
- Brake Disc Hub Height [mm]: 49,9
- Packaging width [cm]: 30
- Packaging height [cm]: 13
- Packaging Depth [cm]: 30
- Item number: V95-40010
- Manufacturer: VAICO
- EAN number: 4046001550560
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Brake System: Lucas / TRW
- Construction Year to: 12 / 1999
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Thickness [mm]: 13,8
- Quantity Unit: Axle Set
- Height [mm]: 53,5
- Width [mm]: 89,9
- Test Mark: E1 90R-011175 / 1029
- MAPP code available
- Number of bolts / screws: 2
- Item number: 13.0460-2935.2
- Our price: 28,49 €
- Manufacturer: ATE
- EAN number: 4006633110426
- Condition: New
- Fitting Position: Rear Axle
- Brake System: ATE
- Wear Warning Contact: not prepared for wear warning indicator
- Thickness [mm]: 14,5
- Quantity Unit: Axle Set
- Height [mm]: 56,6
- Width [mm]: 61,7
- Number of pads: 4
- Item number: C2V002ABE
- Our price: 17,99 €
- Manufacturer: ABE
- EAN number: 5900427194076
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 288
- Construction Year from: 10 / 1999
- Brake Disc Type: solid
- Drilled: no
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Wheel Diameter [inch]: 15
- Brake Disc Thickness [mm]: 12
- Height [mm]: 65
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Item number: C4V005ABE
- Manufacturer: ABE
- EAN number: 5900427206564
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 286
- Brake Disc Type: Vented
- Drilled: no
- Surface: Oiled
- Rim Size [inch]: 15
- Brake Disc Thickness [mm]: 26
- Height [mm]: 50,3
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Minimum thickness [mm]: 23
- Test Mark: E1 90R-02C0964 / 2554
- Item number: BG3513
- Manufacturer: DELPHI
- EAN number: 5012759140468
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 280
- Construction Year to: 09 / 1999
- Brake Disc Type: Vented
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness [mm]: 26
- Height [mm]: 50,2
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Minimum thickness [mm]: 23
- Test Mark: E1 90R-02C0957 / 2538
- Item number: BG2841
- Manufacturer: DELPHI
- EAN number: 5012759924174
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 288
- Construction Year from: 10 / 1999
- Brake Disc Type: solid
- Drilled: no
- Supplementary Info: Original VAICO Quality
- Brake Disc Thickness [mm]: 11,9
- Height [mm]: 64,8
- Centering Diameter [mm]: 68
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 108
- Minimum thickness [mm]: 10
- Weight [kg]: 6,199
- Brake Disc Hub Height [mm]: 53
- Packaging width [cm]: 30
- Packaging height [cm]: 14
- Packaging Depth [cm]: 30
- Item number: V95-40007
- Manufacturer: VAICO
- EAN number: 4046001469381
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Brake System: ATE
- Construction Year to: 03 / 2000
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 19,5
- Quantity Unit: Axle Set
- Height [mm]: 58,5
- Width [mm]: 156,3
- Test Mark: E9 90R-02A1259 / 0261
- MAPP code available
- Item number: 13.0460-7053.2
- Our price: 39,99 €
- Manufacturer: ATE
- EAN number: 4006633140362
- Condition: New