Passat B6 Variant 2.0 TDI Flywheel bolt (120 hp Diesel BWV)
- Number of bolts / screws: 6
- Item number: 411 0133 10
- Our price: 9,65 €
- Manufacturer: LuK
- EAN number: 4005108524638
- Condition: New
-
- Transmission Type: Manual Transmission
- Vehicle Equipment: for vehicles with direct shift transmission
- Clutch Type: for wet clutch
- Number of bolts / screws: 6
- Item number: DMFS009
- Our price: 13,02 €
- Manufacturer: KAWE
- EAN number: 8717012039400
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Thread Size: M10 x 1 x 22
- Strength class: 12.9
- Item number: 57365
- Our price: 3,31 €
- Manufacturer: AIC
- EAN number: 4046283573653
- Condition: New
Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use.
For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules.
If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at:
Phone: 040 - 25 30 66 55 Email: [email protected]
This often avoids extensive troubleshooting that is disproportionate to normal repair times.
The following applies to complaints: The more complete the processes are submitted, the faster they can be processed.
Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Diameter [mm]: 282
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 12,0
- Fitting Position: Rear Axle
- Height [mm]: 48,6
- Surface: Coated
- Centering Diameter [mm]: 65
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 10
- Inner Diameter [mm]: 159
- Bore Diameter [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- fulfils ECE norm: ECE-R90
- Drilled: no
- Item number: C4W015ABE
- Manufacturer: ABE
- EAN number: 5900427206793
- Condition: New
- Diameter [mm]: 312
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Fitting Position: Front Axle
- Height [mm]: 49,9
- Surface: Oiled
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 22
- Test Mark: E1 90R-02C0277 / 1198
- Drilled: no
- Item number: BG3953
- Manufacturer: DELPHI
- EAN number: 5012759360545
- Condition: New
-
- Fitting Position: Front Axle
- for PR number: 1LH, 1LJ, 1ZG
- Diameter [mm]: 312
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 25
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 22
- for article number: A1004V
- Drilled: no
- Item number: A1004V
- Manufacturer: LPR
- EAN number: 8032532102671
- Condition: New
-
- Fitting Position: Rear Axle
- Vehicle Equipment: for vehicles with electric parking brake
- for PR number: 1KU
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Height [mm]: 48,2
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 10
- Drilled: no
- Item number: A1005P
- Manufacturer: LPR
- EAN number: 8032532080108
- Condition: New
-
- Fitting Position: Rear Axle
- Vehicle Equipment: for vehicles with electric parking brake
- for PR number: 2EA, 2EL
- Diameter [mm]: 310
- Brake Disc Type: internally vented
- Brake System: ATE
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48,4
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 20
- Drilled: no
- Item number: A1014V
- Manufacturer: LPR
- EAN number: 8032928002936
- Condition: New
price incl. 19% VAT
-
- Fitting Position: Front Axle
- for PR number: 1LK
- Diameter [mm]: 345
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 30
- Height [mm]: 49,9
- Centering Diameter [mm]: 65
- Minimum thickness [mm]: 27
- Drilled: no
- Item number: A1024V
- Manufacturer: LPR
- EAN number: 8032928039024
- Condition: New
price incl. 19% VAT
- Diameter [mm]: 312
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Fitting Position: Front Axle
- Height [mm]: 50
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Drilled: no
- Item number: BDC5416
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438069259
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- for PR number: 1KU, 1KW
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Brake System: Lucas / TRW
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 16,9
- Supplementary Article / Supplementary Info: with accessories
- Height [mm]: 56,4
- Width [mm]: 105,2
- Test Mark: E1 90R-02A0498 / 0349
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Vehicle Equipment: for vehicles with electric parking brake
- MAPP code available
- Article number of recommended accessories: 13.0460-0517.2
- Number of bolts / screws: 4
- Item number: 13.0460-2749.2
- Our price: 37,21 €
- Manufacturer: ATE
- EAN number: 4006633330015
- Condition: New
for vehicles with electric handbrake
-
- for PR number: 2EA, 2EL
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Brake System: Lucas / TRW
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 17,1
- Supplementary Article / Supplementary Info: with accessories
- Height [mm]: 55,9
- Width [mm]: 105,3
- Test Mark: E1 90R-02A0498 / 0349
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Vehicle Equipment: for vehicles without electric parking brake
- MAPP code available
- Article number of recommended accessories: 13.0460-0259.2
- Number of bolts / screws: 4
- Observe dimensions
- Item number: 13.0460-2887.2
- Our price: 43,30 €
- Manufacturer: ATE
- EAN number: 4006633201605
- Condition: New
-
- for PR number: 1LJ, 1LH, 1ZG, 1ZM
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: incl. wear warning contact
- Thickness [mm]: 20,6
- Number of wear indicators [per axle]: 1
- Height 1 [mm]: 66,0
- Height 2 [mm]: 71,3
- Width 2 [mm]: 156,3
- Width 1 [mm]: 155,1
- Test Mark: E1 90R-02A0334 / 0194
- Warning Contact Length [mm]: 155
- MAPP code available
- Item number: 13.0460-7184.2
- Our price: 47,72 €
- Manufacturer: ATE
- EAN number: 4006633118033
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- for PR number: 1LK, 1LM
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: incl. wear warning contact
- Thickness [mm]: 20,3
- Height 1 [mm]: 72,9
- Height 2 [mm]: 72,9
- Width 2 [mm]: 156,3
- Width 1 [mm]: 155,1
- Test Mark: E9 90R-02A1259 / 0708
- Warning Contact Length [mm]: 177,5
- MAPP code available
- Item number: 13.0460-7200.2
- Our price: 61,99 €
- Manufacturer: ATE
- EAN number: 4006633188265
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- for PR number: 1KU, 1KW
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Brake System: Lucas / TRW
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 16,9
- Product line: Ceramic
- Supplementary Article / Supplementary Info: with accessories
- Height [mm]: 56,4
- Width [mm]: 105,2
- Test Mark: E1 90R-02A0258 / 0350
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Vehicle Equipment: for vehicles with electric parking brake
- MAPP code available
- Article number of recommended accessories: 13.0460-0517.2
- Number of bolts / screws: 4
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-2749.2
- Our price: 51,44 €
- Manufacturer: ATE
- EAN number: 4006633346382
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones. s, i.e. smooth ones.
-
- Fitting Position: Front Axle
- for combined PR number: 1LJ+1LH+1ZM
- Diameter [mm]: 312
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Height [mm]: 49,9
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Inner Diameter [mm]: 146
- Machining: High-carbon
- No. of holes 2: 9
- Bore Diameter [mm]: 15,3
- Drilled: no
- Item number: 25833
- Manufacturer: MAPCO
- EAN number: 4043605415516
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 282
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Fitting Position: Rear Axle
- Height [mm]: 48,6
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 10
- Inner Diameter [mm]: 159
- No. of holes 2: 9
- Bore Diameter [mm]: 15,3
- Drilled: no
- Item number: 25841
- Manufacturer: MAPCO
- EAN number: 4043605441874
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 312
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25,0
- Fitting Position: Front Axle
- Height [mm]: 49,9
- Surface: Coated
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Inner Diameter [mm]: 146
- Machining: High-carbon
- No. of holes 2: 9
- Bore Diameter [mm]: 15,3
- Drilled: no
- Item number: C3W039ABE
- Manufacturer: ABE
- EAN number: 5901655214055
- Condition: New
- Diameter [mm]: 312
- Brake Disc Type: Vented
- Supplementary Info: ORIGINAL Quality
- for PR number: 1LJ, 1LH, 1ZM
- Brake Disc Thickness [mm]: 25
- Fitting Position: Front Axle
- Height [mm]: 49,9
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Required quantity: 2
- Drilled: no
- Item number: 115 521 1094
- Manufacturer: MEYLE
- EAN number: 4040074429006
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- for PR number: 1KU, 1KW
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Brake System: Lucas / TRW
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 17,1
- Supplementary Article / Supplementary Info: with accessories
- Height [mm]: 55,9
- Width [mm]: 105,3
- Test Mark: E1 90R-02A0498 / 0349, E9 90R-02A1163 / 0750
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Vehicle Equipment: for vehicles without electric parking brake
- MAPP code available
- Article number of recommended accessories: 13.0460-0035.2, 13.0460-0259.2
- Number of bolts / screws: 4
- Observe dimensions
- Item number: 13.0460-2880.2
- Our price: 36,51 €
- Manufacturer: ATE
- EAN number: 4006633119153
- Condition: New
for vehicles without electric handbrake