• SHOP
  • CLUB
0
My Garage
Add vehicle
0
items #
0,00 €
Your basket is empty

Passat 365 3.6 FSI 4motion Service kit & filter set (300 hp Petrol BWS)

Service kit & filter set Passat 365 3.6 FSI 4motion 300 Petrol Engine

Recommended part replacement interval for your car for the part category Service kit & filter set: every 15.000 km

2 items
  • Fitting Position: Rear Axle
  • Supplementary Article / Supplementary Info: with oil drain plug
  • Clutch Type: for wet clutch
  • Supplementary Article / Supplementary Info Info 2: without filter, with oil quantity for standard oil change, without strainer
  • Recommended change interval [km]: 30000
  • Recommended change interval [years]: 3
  • Clutch ID: HALDEX GEN IV / 4, HALDEX GEN V / 5
  • Capacity [litre]: 0,85
  • Oil manufacturer recommendation: G 060 175 A2
  • Item number: V10-6603
  • Our price: 66,40 €
  • Manufacturer: VAICO
  • EAN number: 4062375255429
  • Condition: New
Show OEM numbers of the product
Contents of the Parts Kit, oil change, multi-plate clutch (all-wheel-drive) VAICO set:
Description of the product
Units
Article number
Additional information

In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.

installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.

measurement, including photos.

For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.

When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.

If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Details
In stock (Item(s) left: 1)
-15%
compared to RRP 78,12 €

66,40 €

price incl. 19% VAT

excl. delivery costs

Please note!
  • Fitting Position: Rear Axle
  • Supplementary Article / Supplementary Info: with oil drain plug
  • Clutch Type: for wet clutch
  • Filter type: with housing cover, Filter Insert
  • Clutch ID: HALDEX GEN IV / 4
  • Recommended change interval [km]: 30000
  • Quantity Unit: Set
  • Recommended change interval [years]: 3
  • Supplementary Article / Supplementary Info Info 2: with bolts / screws, with seal ring, with filter, with oil quantity for standard oil change, without strainer
  • Capacity [litre]: 0,85
  • Item number: V10-5600
  • Our price: 105,63 €
  • Manufacturer: VAICO
  • EAN number: 4062375166305
  • Condition: New
Show OEM numbers of the product
Contents of the Parts Kit, oil change, multi-plate clutch (all-wheel-drive) VAICO set:
Description of the product
Units
Article number
Additional information

In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.

installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.

measurement, including photos.

For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.

When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.

If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Details
In stock
-33%
compared to RRP 158,89 €

105,63 €

price incl. 19% VAT

excl. delivery costs

Please note!
VW Passat Variant (365) 3.6 FSI 4motion Bestsellers
  • Fitting Position: Front Axle
  • Diameter [mm]: 312
  • for PR number: 1ZG, 1ZM
  • Brake Disc Type: Vented
  • Drilled: no
  • Surface: Coated
  • Machining: High-carbon
  • Brake Disc Thickness [mm]: 25,0
  • Height [mm]: 49,9
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 22
  • Inner Diameter [mm]: 146
  • No. of holes 2: 9
  • Bore Diameter [mm]: 15,3
  • Item number: C3W039ABE
  • Manufacturer: ABE
  • EAN number: 5901655214055
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
50,28 €
Price per item

price incl. 19% VAT

free delivery

LPR A1005P Brake disc Rear Axlex12mm, 5, solid
Article number: A1005P
Reviews - 3
  • Fitting Position: Rear Axle
  • for PR number: 1KW
  • Brake Disc Type: solid
  • Drilled: no
  • Brake Disc Thickness [mm]: 12
  • Height [mm]: 48,2
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Minimum thickness [mm]: 10
  • Item number: A1005P
  • Manufacturer: LPR
  • EAN number: 8032532080108
  • Condition: New
Show OEM numbers of the product
Details
In stock (Item(s) left: 2)
25,67 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Front Axle
  • Diameter [mm]: 312
  • for PR number: 1ZM, 1ZG
  • Brake Disc Type: Vented
  • Drilled: no
  • Supplementary Info: ORIGINAL Quality
  • Brake Disc Thickness [mm]: 25
  • Height [mm]: 49,9
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Wheel Bolt Bore Diameter [mm]: 15,3
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 22
  • Required quantity: 2
  • Item number: 115 521 1094
  • Manufacturer: MEYLE
  • EAN number: 4040074429006
  • Condition: New
Show OEM numbers of the product
Details
In stock
-65%
compared to RRP 140,05 €

47,96 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Rear Axle
  • Brake System: BOSCH
  • Vehicle Identification Number (VIN) from: A3-DC000 001
  • Wear Warning Contact: not prepared for wear warning indicator
    • Production date to: 30.06.2014
    • for brake disc diameter [mm]: 272
    • for brake disc thickness [mm]: 10
  • Thickness [mm]: 16,5
  • Supplementary Info: Q+, original equipment manufacturer quality
  • Quantity Unit: Axle Set
  • Height [mm]: 53,3
  • Width [mm]: 109,3
  • Weight [kg]: 1,063
  • Packaging width [cm]: 9
  • Packaging height [cm]: 9
  • Packaging Depth [cm]: 12,7
  • Item number: V10-0769
  • Our price: 25,55 €
  • Manufacturer: VAICO
  • EAN number: 4046001471087
  • Condition: New
Show OEM numbers of the product
Additional information

In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.

installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.

measurement, including photos.

For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.

When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.

If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Details
In stock
25,55 €

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Front Axle
  • Diameter [mm]: 312
  • for PR number: 1ZM, 1ZG
  • Construction Year to: 10 / 2014
  • Brake Disc Type: Vented
  • Drilled: no
  • Machining: High-carbon
  • Brake Disc Thickness [mm]: 25
  • Height [mm]: 49,9
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 22
  • Inner Diameter [mm]: 146
  • No. of holes 2: 9
  • Bore Diameter [mm]: 15,3
  • Item number: 25833
  • Manufacturer: MAPCO
  • EAN number: 4043605415516
  • Condition: New
Show OEM numbers of the product
Details
In stock
-71%
compared to RRP 166,60 €

47,69 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Rear Axle
  • Diameter [mm]: 282
  • Brake Disc Type: solid
  • Drilled: no
  • Brake Disc Thickness [mm]: 12
  • Height [mm]: 48,6
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 10
  • Inner Diameter [mm]: 159
  • No. of holes 2: 9
  • Bore Diameter [mm]: 15,3
  • Item number: 25841
  • Manufacturer: MAPCO
  • EAN number: 4043605441874
  • Condition: New
Show OEM numbers of the product
Details
In stock
-63%
compared to RRP 109,48 €

40,08 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Rear Axle
  • Diameter [mm]: 310
  • for PR number: 2EA
  • Construction Year to: 10 / 2014
  • Brake Disc Type: Vented
  • Drilled: no
  • Vehicle Equipment: for vehicles with electric parking brake
  • Brake Disc Thickness [mm]: 22
  • Height [mm]: 48,5
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 20
  • Inner Diameter [mm]: 169
  • Bore Diameter [mm]: 15,3
  • Item number: 25842
  • Manufacturer: MAPCO
  • EAN number: 4043605445797
  • Condition: New
Show OEM numbers of the product
Details
In stock
-60%
compared to RRP 107,10 €

42,24 €
Price per item

price incl. 19% VAT

excl. delivery costs

ABE C4W014ABE Brake disc Rear Axle, 310x22mm, 9x112, Vented
Article number: C4W014ABE
Submit a review
  • Fitting Position: Rear Axle
  • Diameter [mm]: 310
  • for PR number: 2EA
  • Brake Disc Type: Vented
  • Drilled: no
  • Brake Disc Thickness [mm]: 22
  • Height [mm]: 48,3
  • Centering Diameter [mm]: 65
  • Number of Holes: 9
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 20
  • Thread Size: 15,5
  • Item number: C4W014ABE
  • Manufacturer: ABE
  • EAN number: 5900427206786
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
53,37 €
Price per item

price incl. 19% VAT

free delivery

ABE C4W015ABE Brake disc Rear Axle, 282x12,0mm, 9x112, Vented
Article number: C4W015ABE
Submit a review
  • Fitting Position: Rear Axle
  • Diameter [mm]: 282
  • for PR number: 1KW
  • Brake Disc Type: Vented
  • Drilled: no
  • Surface: Coated
  • Supplementary Article / Supplementary Info Info 2: with bolts / screws
  • Brake Disc Thickness [mm]: 12,0
  • Height [mm]: 48,6
  • Centering Diameter [mm]: 65
  • Number of Holes: 9
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 10
  • Inner Diameter [mm]: 159
  • Bore Diameter [mm]: 15,3
  • fulfils ECE norm: ECE-R90
  • Item number: C4W015ABE
  • Manufacturer: ABE
  • EAN number: 5900427206793
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
32,69 €
Price per item

price incl. 19% VAT

free delivery

DELPHI BG3975 Brake disc Rear Axle, 310x22mm, 5, Vented
Article number: BG3975
Submit a review
  • Fitting Position: Rear Axle
  • Diameter [mm]: 310
  • for PR number: 2EA
  • Brake Disc Type: Vented
  • Drilled: no
  • Surface: Oiled
  • Brake Disc Thickness [mm]: 22
  • Height [mm]: 48,5
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Minimum thickness [mm]: 20
  • Test Mark: E1 90R-02C0289 / 1665
  • Item number: BG3975
  • Manufacturer: DELPHI
  • EAN number: 5012759370155
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
-37%
compared to RRP 99,36 €

62,10 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Front Axle
  • Brake System: TRW
  • for PR number: 1LA, 1LB
  • Wear Warning Contact: incl. wear warning contact
  • Supplementary Article / Supplementary Info: with accessories
  • Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
  • Quantity Unit: Axle Set
  • Height 1 [mm]: 69,7
  • Height 2 [mm]: 69,7
  • Width 2 [mm]: 175,5
  • Width 1 [mm]: 175,6
  • Thickness 1 [mm]: 20
  • Thickness 2 [mm]: 20
  • WVA Number: 25217, 24738
  • Test Mark: E9 90R-02A0823 / 3045
  • FMSI Code: D1633-8849
  • Friction Lining Material: Semi-Metallic
  • Item number: LP2250
  • Our price: 40,03 €
  • Manufacturer: DELPHI
  • EAN number: 5012759463857
  • Condition: New
Show OEM numbers of the product
Additional information

2 pairs of pads, 1 pad + W.I.

Details
In stock
-71%
compared to RRP 141,41 €

40,03 €

price incl. 19% VAT

excl. delivery costs

LPR A1004V Brake disc Front Axle, 312x25mm, 5
Article number: A1004V
Reviews - 1
  • Fitting Position: Front Axle
  • Diameter [mm]: 312
  • for PR number: 1ZG, 1ZM
  • Drilled: no
  • Brake Disc Thickness [mm]: 25
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Minimum thickness [mm]: 22
  • for article number: A1004V
  • Item number: A1004V
  • Manufacturer: LPR
  • EAN number: 8032532102671
  • Condition: New
Show OEM numbers of the product
Details
In stock (Item(s) left: 4)
42,05 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Rear Axle
  • Diameter [mm]: 310
  • Brake System: ATE
  • for PR number: 2EA
  • Brake Disc Type: internally vented
  • Drilled: no
  • Brake Disc Thickness [mm]: 22
  • Height [mm]: 48,4
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Minimum thickness [mm]: 20
  • Item number: A1014V
  • Manufacturer: LPR
  • EAN number: 8032928002936
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock (Item(s) left: 4)
79,29 €
Price per item

price incl. 19% VAT

free delivery

  • Fitting Position: Rear Axle
  • Diameter [mm]: 310
  • Brake Disc Type: Vented
  • Drilled: no
  • Brake Disc Thickness [mm]: 22
  • Height [mm]: 48,4
  • Centering Diameter [mm]: 65
  • Number of Holes: 9
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 20
  • Item number: BDC5628
  • Manufacturer: QUINTON HAZELL
  • EAN number: 5050438159059
  • Condition: New
Show OEM numbers of the product
Details
In stock
-46%
compared to RRP 110,55 €

59,35 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Rear Axle
  • Brake System: Lucas / TRW
  • for PR number: 1KW
  • Construction Year to: 10 / 2014
  • Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
  • Supplementary Article / Supplementary Info: with accessories
  • Supplementary Article / Supplementary Info Info 2: with brake caliper screws
  • Thickness [mm]: 16,9
  • Quantity Unit: Axle Set
  • Height [mm]: 56,4
  • Width [mm]: 105,2
  • Test Mark: E1 90R-02A0498 / 0349
  • Vehicle Equipment: for vehicles with electric parking brake
  • MAPP code available
  • Article number of recommended accessories: 13.0460-0517.2
  • Number of bolts / screws: 4
  • Item number: 13.0460-2749.2
  • Our price: 36,85 €
  • Manufacturer: ATE
  • EAN number: 4006633330015
  • Condition: New
Show OEM numbers of the product
Additional information

for vehicles with electric handbrake

Details
In stock
-60%
compared to RRP 94,01 €

36,85 €

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Rear Axle
  • Brake System: Lucas / TRW
  • for PR number: 1KW
  • Construction Year to: 10 / 2014
  • Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
  • Supplementary Article / Supplementary Info: with accessories
  • Supplementary Article / Supplementary Info Info 2: with brake caliper screws
  • Thickness [mm]: 17,1
  • Quantity Unit: Axle Set
  • Height [mm]: 55,9
  • Width [mm]: 105,3
  • Test Mark: E1 90R-02A0498 / 0349, E9 90R-02A1163 / 0750
  • Vehicle Equipment: for vehicles without electric parking brake
  • MAPP code available
  • Article number of recommended accessories: 13.0460-0035.2, 13.0460-0259.2
  • Number of bolts / screws: 4
  • Observe dimensions
  • Item number: 13.0460-2880.2
  • Our price: 36,91 €
  • Manufacturer: ATE
  • EAN number: 4006633119153
  • Condition: New
Show OEM numbers of the product
Additional information

for vehicles without electric handbrake

Details
In stock
-61%
compared to RRP 96,39 €

36,91 €

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Rear Axle
  • Brake System: Lucas / TRW
  • for PR number: 2EA
  • Construction Year to: 10 / 2014
  • Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
  • Supplementary Article / Supplementary Info: with accessories
  • Supplementary Article / Supplementary Info Info 2: with brake caliper screws
  • Thickness [mm]: 17,1
  • Quantity Unit: Axle Set
  • Height [mm]: 55,9
  • Width [mm]: 105,3
  • Test Mark: E1 90R-02A0498 / 0349
  • Vehicle Equipment: for vehicles without electric parking brake
  • MAPP code available
  • Article number of recommended accessories: 13.0460-0259.2
  • Number of bolts / screws: 4
  • Observe dimensions
  • Item number: 13.0460-2887.2
  • Our price: 44,61 €
  • Manufacturer: ATE
  • EAN number: 4006633201605
  • Condition: New
Show OEM numbers of the product
Details
In stock
-55%
compared to RRP 99,13 €

44,61 €

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Front Axle
  • Brake System: ATE
  • for PR number: 1ZM, 1ZG
  • Construction Year to: 10 / 2014
  • Wear Warning Contact: incl. wear warning contact
  • Thickness [mm]: 20,6
  • Quantity Unit: Axle Set
  • Number of wear indicators [per axle]: 1
  • Height 1 [mm]: 66,0
  • Height 2 [mm]: 71,3
  • Width 2 [mm]: 156,3
  • Width 1 [mm]: 155,1
  • Test Mark: E1 90R-02A0334 / 0194
  • Warning Contact Length [mm]: 155
  • MAPP code available
  • Item number: 13.0460-7184.2
  • Our price: 46,75 €
  • Manufacturer: ATE
  • EAN number: 4006633118033
  • Condition: New
Show OEM numbers of the product
Details
In stock
-64%
compared to RRP 130,90 €

46,75 €
Price per item

price incl. 19% VAT

excl. delivery costs

Find the best offers on