Mazda 323 C IV BG 1.6 Hydraulic steering filter (90 hp Petrol B67K)
Recommended part replacement interval for your car for the part category Hydraulic steering filter: every 50.000 km / every 24 months
- New part without deposit
- Vehicle Equipment: for vehicles with power steering
- Flange Diameter [mm]: 10
- Filter type: In-Line Filter
- Specification: Magnetfilter
- Item number: V99-0005
- Our price: 24,51 €
- Manufacturer: VAICO
- EAN number: 4062375015443
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Manufacturer Restriction: Schutzfilter
- Vehicle Equipment: for vehicles with power steering
- Flange Diameter [mm]: 10
- Filter type: In-Line Filter
- Specification: Magnetfilter
- Length [mm]: 126
- New part without deposit
- Item number: 29990
- Our price: 24,28 €
- Manufacturer: MAPCO
- EAN number: 4043605042187
- Condition: New
- Manufacturer Restriction: Schutzfilter
- Vehicle Equipment: for vehicles with power steering
- Filter type: In-Line Filter
- Specification: Magnetfilter
- Length [mm]: 202
- Diameter 1 [mm]: 10
- Diameter 2 [mm]: 12
- Item number: 29992
- Our price: 31,54 €
- Manufacturer: MAPCO
- EAN number: 4043605394675
- Condition: New
- Flange Diameter [mm]: 10
- Vehicle Equipment: for vehicles with power steering
- Filter type: In-Line Filter
- Item number: 417H0002
- Our price: 28,87 €
- Manufacturer: RIDEX
- EAN number: 4059191597871
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Flange Diameter [mm]: 10
- Vehicle Equipment: for vehicles with power steering
- Filter type: In-Line Filter
- Item number: SKHFS-3260001
- Our price: 48,22 €
- Manufacturer: STARK
- EAN number: 4059191597864
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 12 / 1994
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Brake System: Sumitomo
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 15
- Height [mm]: 64,2
- Width [mm]: 91,6
- Test Mark: E9 90R-01229 / 1032
- MAPP code available
- Article number of recommended accessories: 13.0460-0149.2, 13.0460-0339.2
- Observe dimensions
- Item number: 13.0460-5944.2
- Our price: 25,95 €
- Manufacturer: ATE
- EAN number: 4006633147187
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 12 / 1994
- Transmission Type: Automatic Transmission, Manual Transmission
- Fitting Position: Front Axle
- Braking System: for vehicles with disc brakes on the rear axle
- Diameter [mm]: 235,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22,0
- Height [mm]: 45
- Surface: Coated
- Centering Diameter [mm]: 55,0
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 20,0
- Inner Diameter [mm]: 125,0
- MAPP code available
- Test Mark: E1 90R-02C0115 / 0099
- Bore Diameter [mm]: 13,0
- Drilled: no
- Item number: 24.0122-0166.1
- Manufacturer: ATE
- EAN number: 4006633070706
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 07 / 1994
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Thickness [mm]: 11,5
- Material: Low-Metallic
- Height [mm]: 39,2
- Width [mm]: 102,3
- WVA Number: 21559
- Test Mark: ECE-R90
- Manufacturer Restriction: AKEBONO System
- Article number of recommended accessories: 1987474619
- Observe technical data
- Item number: 0 986 461 146
- Our price: 23,66 €
- Manufacturer: BOSCH
- EAN number: 3165143725085
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 07 / 1994
- Fitting Position: Front Axle
- Transmission Type: Automatic Transmission
- Diameter [mm]: 235
- Brake Disc Type: Vented, internally vented
- Brake Disc Thickness [mm]: 22
- Height [mm]: 45,1
- Surface: Oiled
- Centering Diameter [mm]: 55
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 20
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 13,1
- Drilled: no
- Item number: 0 986 478 219
- Manufacturer: BOSCH
- EAN number: 3165143078396
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 07 / 1994
- Fitting Position: Front Axle
- Transmission Type: Manual Transmission
- Diameter [mm]: 235
- Brake Disc Type: Vented, internally vented
- Brake Disc Thickness [mm]: 18
- Height [mm]: 45
- Surface: Oiled
- Centering Diameter [mm]: 55
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 16,5
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 13
- Drilled: no
- Item number: 0 986 478 241
- Manufacturer: BOSCH
- EAN number: 4047024199217
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 07 / 1994
- Fitting Position: Rear Axle
- Diameter [mm]: 231
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 9
- Height [mm]: 34,5
- Surface: Oiled
- Centering Diameter [mm]: 55,02
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 8
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 13
- Drilled: no
- Item number: 0 986 478 242
- Manufacturer: BOSCH
- EAN number: 4047024093898
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Transmission Type: Manual Transmission
- Diameter [mm]: 235
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 18
- Height [mm]: 45
- Centering Diameter [mm]: 55
- Hole Arrangement / Number: 04 / 05
- Wheel Bolt Bore Diameter [mm]: 13
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 16
- Inner Diameter [mm]: 125
- Weight [kg]: 3,6
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 24,8
- Packaging width [cm]: 24,8
- Packaging height [cm]: 10,5
- Drilled: no
- Item number: 92061500
- Manufacturer: TEXTAR
- EAN number: 4019722150739
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 250
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 9
- Fitting Position: Rear Axle
- Height [mm]: 35
- Centering Diameter [mm]: 55
- Number of Holes: 4
- Minimum thickness [mm]: 8
- Tightening Torque [Nm]: 103
- Drilled: no
- Item number: 08.6857.10
- Manufacturer: BREMBO
- EAN number: 8020584685716
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 12 / 1994
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 11,5
- Height [mm]: 39,3
- Width [mm]: 102,3
- Test Mark: E9 90R-01231 / 1218
- MAPP code available
- Item number: 13.0460-5972.2
- Our price: 26,87 €
- Manufacturer: ATE
- EAN number: 4006633021906
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 12 / 1994
- Fitting Position: Rear Axle
- Diameter [mm]: 231
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 9,0
- Height [mm]: 34,5
- Centering Diameter [mm]: 65,0
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 8,0
- Inner Diameter [mm]: 125,0
- MAPP code available
- Test Mark: E1 90R-02C0165 / 0923
- Bore Diameter [mm]: 13,0
- Drilled: no
- Item number: 24.0109-0127.1
- Manufacturer: ATE
- EAN number: 4006633007764
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 12 / 1994
- Transmission Type: Manual Transmission
- Braking System: for vehicles with drum brakes on the rear axle
- Fitting Position: Front Axle
- Diameter [mm]: 235,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 18,0
- Height [mm]: 45
- Surface: Coated
- Centering Diameter [mm]: 55,0
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 16,0
- Inner Diameter [mm]: 125,0
- MAPP code available
- Test Mark: E1 90R-02C0115 / 0123
- Bore Diameter [mm]: 13,0
- Drilled: no
- Item number: 24.0118-0113.1
- Manufacturer: ATE
- EAN number: 4006633301367
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 07 / 1994
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 15
- Material: Low-Metallic
- Height [mm]: 64,2
- Width [mm]: 91,6
- WVA Number: 21654
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Manufacturer Restriction: SUMITOMO System
- Article number of recommended accessories: 1987474140, 1987474208, 1987474650, 1987474621, 1987474305
- Observe technical data
- Item number: 0 986 461 141
- Our price: 22,30 €
- Manufacturer: BOSCH
- EAN number: 3165143210734
- Condition: New
- Quantity Unit: Axle Set
- Brake System: Sumitomo
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 15,3
- Fitting Position: Front Axle
- Supplementary Article / Supplementary Info: with accessories
- Number of wear indicators [per axle]: 2
- Height [mm]: 64
- Width [mm]: 91,8
- WVA Number: 21654
- Weight [kg]: 1,2
- Packaging length [cm]: 12,5
- Packaging width [cm]: 8,1
- Packaging height [cm]: 8
- Item number: 2165404
- Our price: 27,32 €
- Manufacturer: TEXTAR
- EAN number: 4019722267604
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Transmission Type: Automatic Transmission
- Diameter [mm]: 235
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 22
- Height [mm]: 45
- Centering Diameter [mm]: 55
- Number of Holes: 4
- Minimum thickness [mm]: 20
- Tightening Torque [Nm]: 103
- Drilled: no
- Item number: 09.5581.34
- Manufacturer: BREMBO
- EAN number: 8020584013953
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Transmission Type: Manual Transmission
- Diameter [mm]: 235
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 18
- Height [mm]: 45
- Centering Diameter [mm]: 55
- Number of Holes: 4
- Minimum thickness [mm]: 16
- Tightening Torque [Nm]: 103
- Drilled: no
- Item number: 09.5869.14
- Manufacturer: BREMBO
- EAN number: 8020584012949
- Condition: New
price incl. 19% VAT
excl. delivery costs