Fiat Brava 182 1.6 16V Egr valve gasket (103 hp Petrol 182 A4.000)
- Fitting Position: Throttle Valve at EGR valve
- Shape: O-Ring
- Diameter [mm]: 55,2
- Thickness [mm]: 2,62
- Weight [kg]: 0,002
- Supplementary Info: Q+, original equipment manufacturer quality MADE IN GERMANY
- Cooling Hose: from auxiliary water pump to crankcase
- Packaging height [cm]: 0,262
- Packaging Depth [cm]: 6,2
- Item number: V10-63-0102
- Our price: 5,29 €
- Manufacturer: VEMO
- EAN number: 4046001797668
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. the designated use. Please note that our products are usually delivered without Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use. unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle
- Diameter [mm]: 257
- Construction Year to: 08 / 1998
- Brake Disc Type: solid
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness [mm]: 12
- Height [mm]: 40,5
- Centering Diameter [mm]: 59,1
- Number of Holes: 4
- Minimum thickness [mm]: 10,2
- Test Mark: E1 90R-02C0967 / 2525
- Item number: BG2411
- Manufacturer: DELPHI
- EAN number: 5012759424100
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 257
- Construction Year from: 09 / 1998
- Brake Disc Type: Vented
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness [mm]: 20
- Height [mm]: 40,5
- Centering Diameter [mm]: 59,1
- Number of Holes: 4
- Minimum thickness [mm]: 18,2
- Test Mark: E1 90R-02C0958 / 2553
- Item number: BG2830
- Manufacturer: DELPHI
- EAN number: 5012759936665
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 257
- Brake System: ATE
- Drilled: no
- Transmission Type: Manual Transmission
- Brake Disc Thickness [mm]: 12
- Height [mm]: 40,5
- Centering Diameter [mm]: 59
- Number of Holes: 4
- Minimum thickness [mm]: 10,2
- Item number: F2091P
- Manufacturer: LPR
- EAN number: 8032532070840
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 257,5
- Construction Year from: 09 / 1998
- Brake Disc Type: Vented
- Drilled: no
- Supplementary Info: ORIGINAL Quality
- Brake Disc Thickness [mm]: 20
- Height [mm]: 40,5
- Centering Diameter [mm]: 59
- Number of Holes: 4
- Wheel Bolt Bore Diameter [mm]: 13
- Bolt Hole Circle Ø [mm]: 98
- Minimum thickness [mm]: 18,2
- Required quantity: 2
- Item number: 215 521 0008
- Manufacturer: MEYLE
- EAN number: 4040074438633
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 258
- Brake Disc Type: Vented
- Drilled: no
- Brake Disc Thickness [mm]: 20
- Height [mm]: 40,5
- Centering Diameter [mm]: 59
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 98
- Minimum thickness [mm]: 18,2
- Item number: BDC3593
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593240292
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 257,5
- Brake Disc Type: Vented
- Drilled: no
- Transmission Type: Automatic Transmission
- Brake Disc Thickness [mm]: 20,0
- Height [mm]: 40,5
- Centering Diameter [mm]: 59,0
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 98,0
- Minimum thickness [mm]: 18,2
- Inner Diameter [mm]: 126,7
- Bore Diameter [mm]: 13,0
- Item number: BAR20142
- Manufacturer: Barum
- EAN number: 4006633324649
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 257,5
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Transmission Type: Manual Transmission
- Brake Disc Thickness [mm]: 12,0
- Height [mm]: 40,5
- Centering Diameter [mm]: 59,0
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 98,0
- Minimum thickness [mm]: 10,2
- Inner Diameter [mm]: 123,0
- MAPP code available
- Test Mark: E1 90R-02C0165 / 0815
- Bore Diameter [mm]: 13,0
- Item number: 24.0112-0127.1
- Manufacturer: ATE
- EAN number: 4006633138826
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 257,5
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Machining: Alloyed / High-carbon
- Transmission Type: Automatic Transmission
- Product line: PowerDisc
- Brake Disc Thickness [mm]: 20,0
- Height [mm]: 40,5
- Centering Diameter [mm]: 59,0
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 98,0
- Minimum thickness [mm]: 18,2
- Inner Diameter [mm]: 126,7
- MAPP code available
- Test Mark: E1 90R-02C0858 / 2536
- Bore Diameter [mm]: 13,0
- Item number: 24.0320-0142.1
- Manufacturer: ATE
- EAN number: 4006633276894
- Condition: New
For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Brake System: ATE
- Construction Year to: 09 / 2001
- Construction Year from: 10 / 1999
- Wear Warning Contact: incl. wear warning contact
- Material: Low-Metallic
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate, with mounting manual
- RICAMBI Number from: 4937345
-
- TecDoc Engine Number: 182 A4.000
- Transmission Type: Automatic Transmission
- RICAMBI Number from: 4937345
- Thickness [mm]: 17,5
- Quantity Unit: Axle Set
- Height [mm]: 52,5
- Width [mm]: 156,4
- WVA Number: 21927
- Test Mark: ECE-R90
- Article number of recommended accessories: 1987474113, 1987474241, 1987474713, 1987474354, 1987474282
- Observe technical data
- Item number: 0 986 424 362
- Our price: 23,49 €
- Manufacturer: BOSCH
- EAN number: 3165143657935
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 257
- Brake Disc Type: solid
- Drilled: no
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Brake Disc Thickness [mm]: 12
- Height [mm]: 40,5
- Centering Diameter [mm]: 59
- Number of Holes: 4
- Thickness [mm]: 12
- Minimum thickness [mm]: 10,2
- Transmission Type: Manual Transmission
- Wear Warning Contact: incl. wear warning contact, with integrated wear warning contact
- Item number: C3F004ABE
- Manufacturer: ABE
- EAN number: 5900427199538
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 241
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 11,0
- Height [mm]: 40
- Centering Diameter [mm]: 59
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 98
- Minimum thickness [mm]: 9,2
- Inner Diameter [mm]: 123
- Bore Diameter [mm]: 13
- Item number: C3F014ABE
- Manufacturer: ABE
- EAN number: 5900427199590
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 240
- Brake Disc Type: solid
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness [mm]: 10,9
- Height [mm]: 40
- Centering Diameter [mm]: 59
- Number of Holes: 4
- Minimum thickness [mm]: 9,2
- Test Mark: E1 90R-02C0250 / 1193
- Item number: BG2458
- Manufacturer: DELPHI
- EAN number: 5012759424575
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Brake System: Perrot
- Wear Warning Contact: incl. wear warning contact
- Thickness [mm]: 176, 17,6
- Quantity Unit: Axle Set
- Number of wear indicators [per axle]: 1
- Height [mm]: 52,5
- Width [mm]: 151,5
- Item number: 0588.01
- Our price: 45,99 €
- Manufacturer: REMSA
- EAN number: 8427975000682
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 257
- Brake System: TRW
- Construction Year from: 09 / 1998
- Brake Disc Type: internally vented
- Drilled: no
- Transmission Type: Automatic Transmission
- Brake Disc Thickness [mm]: 20
- Height [mm]: 40,5
- Centering Diameter [mm]: 59
- Number of Holes: 4
- Minimum thickness [mm]: 18,2
- Item number: L2051V
- Manufacturer: LPR
- EAN number: 8032532071519
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Drilled: no
- Brake Disc Thickness [mm]: 12
- Height [mm]: 40
- Centering Diameter [mm]: 59
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 98
- Minimum thickness [mm]: 10,2
- Item number: BDC3511
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593166189
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Brake System: ATE
- Wear Warning Contact: incl. wear warning contact
- Transmission Type: Manual Transmission
- Thickness [mm]: 17,9
- Quantity Unit: Axle Set
- Height [mm]: 52,0
- Width [mm]: 151,3
- Test Mark: E1 90R-01306 / 120
- Warning Contact Length [mm]: 201
- MAPP code available
- Item number: 13.0460-7064.2
- Our price: 26,49 €
- Manufacturer: ATE
- EAN number: 4006633271462
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Brake System: ATE
- Wear Warning Contact: incl. wear warning contact
- Transmission Type: Automatic Transmission
- Thickness [mm]: 17,9
- Quantity Unit: Axle Set
- Height [mm]: 52,7
- Width [mm]: 156,3
- Test Mark: E1 90R-02A0278 / 0152
- Warning Contact Length [mm]: 198
- MAPP code available
- Item number: 13.0460-7065.2
- Our price: 24,49 €
- Manufacturer: ATE
- EAN number: 4006633271486
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 257,5
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Machining: Alloyed / High-carbon
- Transmission Type: Automatic Transmission
- Brake Disc Thickness [mm]: 20,0
- Height [mm]: 40,5
- Centering Diameter [mm]: 59,0
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 98,0
- Minimum thickness [mm]: 18,2
- Inner Diameter [mm]: 126,7
- MAPP code available
- Test Mark: E1 90R-02C0115 / 0493
- Bore Diameter [mm]: 13,0
- Item number: 24.0120-0142.1
- Manufacturer: ATE
- EAN number: 4006633138703
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Brake System: ATE
- Construction Year to: 09 / 2001
- Construction Year from: 11 / 1998
- Wear Warning Contact: with integrated wear sensor
- Material: Low-Metallic
- Supplementary Article / Supplementary Info Info 2: with piston clip
- Engine Code: 182 A4.027<M6>
-
- TecDoc Engine Number: 182 A4.000
- Engine Code: 182 A4.027<M5>
- Transmission Type: Manual Transmission
- Thickness [mm]: 17
- Quantity Unit: Axle Set
- Height [mm]: 52
- Width 2 [mm]: 151,6
- Width 1 [mm]: 151,5
- WVA Number: 21930
- Test Mark: ECE-R90
- Article number of recommended accessories: 1987474354, 1987474241
- Observe technical data
- Item number: 0 986 424 246
- Our price: 24,99 €
- Manufacturer: BOSCH
- EAN number: 3165143770085
- Condition: New