Mazda 626 Coupe GD 2.0 Receiver drier (90 hp Petrol FE (8V))
Recommended part replacement interval for your car for the part category Receiver drier: every 15.000 km / every 12 months
- Diameter [mm]: 63,6
- New Part
- Material: Steel
- Packaging height [cm]: 9
- Packaging width [cm]: 12
- Packaging length [cm]: 29
- Weight [kg]: 0,82
- Outer Length [mm]: 220
- Specification: O-Ring
- External Thread 1 [mm]: 15,7
- External Thread 2 [mm]: 15,7
- Item number: 801770N
- Our price: 21,58 €
- Manufacturer: AKS DASIS
- EAN number: 4044455336365
- Condition: New
price incl. 19% VAT
excl. delivery costs

- Packaging height [cm]: 7,4
- Weight [kg]: 0,901
- Item number: A32-06-0006
- Our price: 57,66 €
- Manufacturer: ACKOJA
- EAN number: 4062375100224
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Diameter [mm]: 258,5
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Fitting Position: Rear Axle
- Height [mm]: 58
- Centering Diameter [mm]: 48
- Number of Holes: 5
- Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Drilled: no
- Item number: C43009ABE
- Manufacturer: ABE
- EAN number: 5900427203709
- Condition: New
- Diameter [mm]: 261
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Fitting Position: Rear Axle
- Height [mm]: 40
- Centering Diameter [mm]: 72
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114
- Minimum thickness [mm]: 8
- Drilled: no
- Item number: BDC3959
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593295186
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 264
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 24
- Fitting Position: Front Axle
- Height [mm]: 46,5
- Centering Diameter [mm]: 64
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114
- Minimum thickness [mm]: 22
- Drilled: no
- Item number: BDC3657
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593240483
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Quantity Unit: Axle Set
- Brake System: Akebono
- Wear Warning Contact: with acoustic wear warning
- Fitting Position: Front Axle
- Height [mm]: 52,5
- Width [mm]: 130,0
- Thickness 1 [mm]: 15,0
- Thickness 2 [mm]: 16,0
- Test Mark: E9 90R-01229 / 1335
- MAPP code available
- Article number of recommended accessories: 13.0460-0313.2
- Observe dimensions
- Item number: 13.0460-5932.2
- Our price: 26,65 €
- Manufacturer: ATE
- EAN number: 4006633130936
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 264,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 24,0
- Fitting Position: Front Axle
- Height [mm]: 46,5
- Surface: Coated
- Centering Diameter [mm]: 64,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Minimum thickness [mm]: 22,0
- Inner Diameter [mm]: 137,0
- MAPP code available
- Test Mark: E1 90R-02C0115 / 0331
- Bore Diameter [mm]: 12,6
- Drilled: no
- Item number: 24.0124-0105.1
- Manufacturer: ATE
- EAN number: 4006633110860
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Quantity Unit: Axle Set
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 15
- Fitting Position: Front Axle
- Material: Low-Metallic
- Height [mm]: 52,2
- Width [mm]: 118,8
- WVA Number: 21378
- Test Mark: ECE-R90
- Manufacturer Restriction: AKEBONO System
- Article number of recommended accessories: 1987474153
- Observe technical data
- Item number: 0 986 493 790
- Our price: 34,60 €
- Manufacturer: BOSCH
- EAN number: 4047024044258
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 264
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 24
- Fitting Position: Front Axle
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Minimum thickness [mm]: 22
- Weight [kg]: 2,65
- Drilled: no
- Item number: 15534
- Manufacturer: MAPCO
- EAN number: 4043605007230
- Condition: New
- Quantity Unit: Axle Set
- Thickness [mm]: 12,7
- Fitting Position: Rear Axle
- Length [mm]: 104
- Height [mm]: 41,4
- WVA Number: 21558
- Brake Type: Disc Brake
- Item number: PP-306AF
- Our price: 63,26 €
- Manufacturer: JAPANPARTS
- EAN number: 8033001137286
- Condition: New
-
- Fitting Position: Front Axle
- for model code: 626
- Diameter [mm]: 264
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 24
- Height [mm]: 47,5, 48
- Centering Diameter [mm]: 64
- Number of Holes: 5
- Minimum thickness [mm]: 22
- Drilled: no
- Item number: BG2547
- Manufacturer: DELPHI
- EAN number: 5012759425435
- Condition: New
-
- Fitting Position: Front Axle
- Alternatively
- Quantity Unit: Axle Set
- Manufacturer Restriction: AKEBONO System
- Article number of recommended accessories: 1987474153
- Observe technical data
- Item number: 0 986 424 202
- Our price: 69,22 €
- Manufacturer: BOSCH
- EAN number: 3165141121223
- Condition: New
price incl. 19% VAT
-
- Fitting Position: Rear Axle
- Braking System: for vehicles with disc brakes on the rear axle
- Quantity Unit: Axle Set
- Brake System: Sumitomo
- Wear Warning Contact: excl. wear warning contact
- Thickness [mm]: 13
- Supplementary Article / Supplementary Info: without accessories
- Height [mm]: 42
- Width [mm]: 104
- WVA Number: 21558
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Item number: P 24 025
- Our price: 27,26 €
- Manufacturer: BREMBO
- EAN number: 8020584051979
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- for model code: 626
- Quantity Unit: Axle Set
- Brake System: Sumitomo
- Wear Warning Contact: not prepared for wear warning indicator
- Supplementary Article / Supplementary Info: without accessories
- Height 1 [mm]: 42,1
- Height 2 [mm]: 42,1
- Width 2 [mm]: 103,9
- Width 1 [mm]: 104,3
- Thickness 1 [mm]: 12,2
- Thickness 2 [mm]: 12,2
- WVA Number: 21558
- Test Mark: E1 90R-01878 / 449
- Supplementary Article / Supplementary Info Info 2: without anti-squeak plate
- FMSI Code: D400-7289 D584-7464
- Friction Lining Material: Low-Metallic
- Item number: LP624
- Our price: 16,53 €
- Manufacturer: DELPHI
- EAN number: 8019951025439
- Condition: New
4 identical pads
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 264
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 24
- Fitting Position: Front Axle
- Surface: Coated
- Centering Diameter [mm]: 64
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Thickness [mm]: 46,5
- Minimum thickness [mm]: 22
- Weight [kg]: 5,210
- Number of mounting bores: 2
- Observe service information
- Drilled: no
- Item number: 10625
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816106258
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 259
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Fitting Position: Rear Axle
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 113
- Minimum thickness [mm]: 8
- Weight [kg]: 1,2
- Drilled: no
- Item number: 15535
- Manufacturer: MAPCO
- EAN number: 4043605007247
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 259
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Fitting Position: Rear Axle
- Number of Holes: 5
- Weight [kg]: 2,8
- Drilled: no
- Item number: 25530
- Manufacturer: MAPCO
- EAN number: 4043605033017
- Condition: New
- Quantity Unit: Axle Set
- Brake System: Akebono
- Wear Warning Contact: incl. wear warning contact
- Fitting Position: Front Axle
- Number of wear indicators [per axle]: 2
- Length [mm]: 129,8
- Height [mm]: 52,3
- Thickness 1 [mm]: 16
- Thickness 2 [mm]: 15
- Weight [kg]: 1,352
- Item number: 0273.02
- Our price: 23,75 €
- Manufacturer: REMSA
- EAN number: 8427975006394
- Condition: New
- Quantity Unit: Axle Set
- Brake System: Akebono
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 15
- Fitting Position: Front Axle
- Height [mm]: 52,5
- Width [mm]: 130
- WVA Number: 21378
- Packaging length [cm]: 15,2
- Packaging width [cm]: 8,8
- Packaging height [cm]: 8,4
- Item number: PA-331AF
- Our price: 70,27 €
- Manufacturer: JAPANPARTS
- EAN number: 8033001123197
- Condition: New
- Quantity Unit: Axle Set
- Brake System: Sumitomo
- Wear Warning Contact: with acoustic wear warning
- Fitting Position: Front Axle
- Supplementary Article / Supplementary Info: with accessories
- Height [mm]: 51,5
- Width [mm]: 131,8
- WVA Number: 23845, 21378, 21379, 21380
- Weight [kg]: 1,36
- Packaging length [cm]: 15,2, 16,8
- Packaging width [cm]: 8,8, 10
- Packaging height [cm]: 8,4, 6,2
- Item number: PA-399AF
- Our price: 46,59 €
- Manufacturer: JAPANPARTS
- EAN number: 8033001123562
- Condition: New