Audi 200 Avant 2.2 20V Turbo quattro Receiver drier (220 hp Petrol 3B)
Recommended part replacement interval for your car for the part category Receiver drier: every 15.000 km / every 12 months
- Diameter [mm]: 89
- New Part
- Material: Aluminium
- Transmission Type: Manual Transmission, Automatic Transmission
- Packaging height [cm]: 14
- Packaging width [cm]: 15
- Packaging length [cm]: 24,5
- Weight [kg]: 0,62
- Thread Size: E:1-1 / 16 , A:1-1 / 16
- Outer Length [mm]: 230
- Pressure Switch Thread Size: 11,8
- Specification: O-Ring
- Number of connectors for pressure switch: 2
- Internal Thread 1 [mm]: 24,9
- External Thread 1 [mm]: 27
- Item number: 800060N
- Our price: 22,49 €
- Manufacturer: AKS DASIS
- EAN number: 4044455335108
- Condition: New
- Supplementary Info: Original VEMO Quality
- Material: Aluminium
- Packaging height [cm]: 12,5
- Supplementary Article / Supplementary Info: with gaskets / seals
- Packaging Depth [cm]: 30,3
- Item number: V10-06-0027
- Our price: 40,99 €
- Manufacturer: VEMO
- EAN number: 4046001468650
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Construction Year to: 11 / 1990
- Material: Low-Metallic
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate, with mounting manual
- Thickness [mm]: 15,1
- Quantity Unit: Axle Set
- Height [mm]: 66,8
- Width [mm]: 87
- WVA Number: 21144
- Test Mark: ECE-R90
- Article number of recommended accessories: 1987474106, 1987474939, 1987474253
- Observe technical data
- Item number: 0 986 494 059
- Our price: 17,49 €
- Manufacturer: BOSCH
- EAN number: 3165143768020
- Condition: New
- Fitting Position: Rear Axle
- Brake System: Lucas
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws, with anti-squeak plate
- Thickness [mm]: 17
- Product line: Prime
- Quantity Unit: Axle Set
- Height [mm]: 68
- Width [mm]: 193
- WVA Number: 21144
- Item number: P 85 013
- Our price: 24,99 €
- Manufacturer: BREMBO
- EAN number: 8020584058169
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 280
- Vehicle Identification Number (VIN) to: ******44*G*073362
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 68
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 46
- Weight [kg]: 5,769
- Observe service information
- Item number: 08359
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816083597
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 269
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 20
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Weight [kg]: 5,138
- Observe service information
- Item number: 11397
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816113973
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Brake System: Girling
- Wear Warning Contact: incl. wear warning contact
-
- for brake disc thickness [mm]: 25
- for brake disc diameter [mm]: 276
- Quantity Unit: Axle Set
- Length [mm]: 145
- Width [mm]: 66
- Thickness 1 [mm]: 19
- Weight [kg]: 2,0
- Observe service information
- Item number: 16062
- Our price: 41,49 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816160625
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Brake System: ATE
- Wear Warning Contact: prepared for wear warning indicator
-
- for brake disc thickness [mm]: 25
- for brake disc diameter [mm]: 310
- Quantity Unit: Axle Set
- Length [mm]: 107, 100
- Width [mm]: 66, 61
- Thickness 1 [mm]: 18, 17
- Weight [kg]: 1,38
- Observe service information
- Item number: 16132
- Our price: 28,49 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816161325
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Brake System: ATE
- Vehicle Identification Number (VIN) from: ******44*K*045094
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article / Supplementary Info Info 2: with piston clip
-
- for brake disc thickness [mm]: 25
- for brake disc diameter [mm]: 276
- Quantity Unit: Axle Set
- Length [mm]: 156
- Width [mm]: 64
- Thickness 1 [mm]: 19
- Test Mark: ECE R90 Approved
- Weight [kg]: 1,7
- Observe service information
- Item number: 16312
- Our price: 38,49 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816163121
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Diameter [mm]: 245
- Brake Disc Type: solid
- Drilled: no
- Brake Disc Thickness [mm]: 10
- Number of Holes: 5
- Minimum thickness [mm]: 8
- Weight [kg]: 1,7
- Item number: 15887
- Manufacturer: MAPCO
- EAN number: 4043605010094
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 276
- Construction Year to: 11 / 1990
- Brake Disc Type: Vented
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness [mm]: 25
- Height [mm]: 46,2
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Minimum thickness [mm]: 23
- Test Mark: E1 90R-02C0289 / 1668
- Item number: BG2518
- Manufacturer: DELPHI
- EAN number: 5012759425169
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 269
- Construction Year to: 11 / 1990
- Brake Disc Type: Vented
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness [mm]: 20
- Height [mm]: 46
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Minimum thickness [mm]: 18
- Test Mark: E1 90R-02C0289 / 0504
- Item number: BG2519
- Manufacturer: DELPHI
- EAN number: 5012759425176
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 245
- Construction Year to: 11 / 1990
- Brake Disc Type: solid
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness [mm]: 10
- Height [mm]: 46,2
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Minimum thickness [mm]: 8
- Test Mark: E1 90R-02C0100 / 1592
- Item number: BG2520
- Manufacturer: DELPHI
- EAN number: 5012759425183
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Brake System: ATE
- Construction Year to: 11 / 1990
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Quantity Unit: Axle Set
- Height 1 [mm]: 66,2
- Height 2 [mm]: 61,1
- Width 2 [mm]: 100,0
- Width 1 [mm]: 107,2
- Thickness 1 [mm]: 17,8
- Thickness 2 [mm]: 16,8
- Test Mark: E9 90R-01230 / 429
- MAPP code available
- Article number of recommended accessories: 24.8190-0105.2
- Observe dimensions
- Item number: 13.0460-2847.2
- Our price: 87,99 €
- Manufacturer: ATE
- EAN number: 4006633039680
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 269
- Construction Year to: 11 / 1990
- Brake Disc Type: Vented, internally vented
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 20
- Height [mm]: 46,5
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 18
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 15,5
- Item number: 0 986 478 316
- Manufacturer: BOSCH
- EAN number: 4047024190948
- Condition: New
- Fitting Position: Rear Axle
- Brake System: Lucas
- Wear Warning Contact: not prepared for wear warning indicator
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Thickness [mm]: 16,6
- Quantity Unit: Axle Set
- Height [mm]: 67,5
- Width [mm]: 87,6
- WVA Number: 21144
- Weight [kg]: 0,8
- Packaging length [cm]: 9,5
- Packaging width [cm]: 8,2
- Packaging height [cm]: 7,3
- Item number: 2114401
- Our price: 27,99 €
- Manufacturer: TEXTAR
- EAN number: 4019722078231
- Condition: New
- Fitting Position: Rear Axle
- Brake System: TRW
- Wear Warning Contact: not prepared for wear warning indicator
- Supplementary Article / Supplementary Info: with accessories
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Product line: PREMIER ECO FRICTION
- Quantity Unit: Axle Set
- Height [mm]: 68
- Width [mm]: 88
- WVA Number: 21144
- Test Mark: R90 Homologated
- Weight [kg]: 0,87
- Quantity per axle: 1, 4
- Packing Type: Box
- Number of springs: 4
- Packaging length [cm]: 15
- Packaging width [cm]: 10,6
- Packaging height [cm]: 4,4
- Number of threaded bolts: 4
- Item number: FDB222
- Our price: 24,99 €
- Manufacturer: FERODO
- EAN number: 5016687067873
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 276
- Brake Disc Type: internally vented
- Drilled: no
- Machining: High-carbon
- Product line: Prime
- Brake Disc Thickness [mm]: 25
- Height [mm]: 46
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Minimum thickness [mm]: 23
- Item number: 09.5734.10
- Manufacturer: BREMBO
- EAN number: 8020584573419
- Condition: New
- Fitting Position: Rear Axle
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article / Supplementary Info: without accessories
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Brake Disc Type: solid
- Quantity Unit: Axle Set
- Height 1 [mm]: 67
- Width 1 [mm]: 87
- Thickness 1 [mm]: 16,2
- Net weight [kg]: 0,85
- Item number: 229952
- Our price: 34,99 €
- Manufacturer: NK
- EAN number: 5703858582203
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Brake System: LUCAS
- Thickness [mm]: 16,6
- Quantity Unit: Axle Set
- Height [mm]: 66,8
- Width [mm]: 87
- Test Mark: E4 90R 01115 / 854
- Item number: 6314
- Our price: 17,49 €
- Manufacturer: MAPCO
- EAN number: 4043605081148
- Condition: New