Polo 6R 1.2 Drum brake (75 hp Petrol CJLA)
Recommended part replacement interval for your car for the part category Drum brake: every 100.000 km
- Fitting Position: Rear Axle
- Width [mm]: 40
- Inner brake drum diameter [mm]: 200
- Supplementary Article / Supplementary Info Info 2: with handbrake lever
- Item number: 70B0002
- Our price: 15,95 €
- Manufacturer: RIDEX
- EAN number: 4059191241712
- Condition: New
-
- TecDoc Engine Number: CJLA
- for PR number: 1KB
-
- TecDoc Engine Number: CJLA
- Fitting Position: Rear Axle
- Diameter [mm]: 239,9
- Inner brake drum diameter [mm]: 200
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 100
- Weight [kg]: 3,68
- Centering Diameter [mm]: 65
- Width [mm]: 40
- Number of mounting bores: 1
- Item number: 24034
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816240341
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for PR number: 1KM
- Fitting Position: Rear Axle
- Drum diameter [mm]: 230,0
- Outer brake drum diameter [mm]: 200
- Inner brake drum height [mm]: 50,1
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Supplementary Article / Supplementary Info Info 2: without wheel bearing
- Item number: V10-60013
- Manufacturer: VAICO
- EAN number: 4062375137640
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for PR number: 1KB, 1KM
- Fitting Position: Rear Axle
- Drum diameter [mm]: 200,0
- Outer brake drum diameter [mm]: 240
- Inner brake drum height [mm]: 51
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Total brake drum height [mm]: 59
- max. brake drum reboring dimension [mm]: 201,5
- Support plate diameter [mm]: 65
- Bore Diameter [mm]: 15,6
- Net weight [kg]: 4,21
- Gross Weight [kg]: 4,38
- Item number: 24022000371-PCS-MS
- Manufacturer: MASTER-SPORT
- EAN number: 4250083135335
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Outer brake drum diameter [mm]: 240
- Inner brake drum height [mm]: 51
- Number of Holes: 1
- Bolt Hole Circle Ø [mm]: 100
- Total brake drum height [mm]: 59,4
- max. brake drum reboring dimension [mm]: 201,5
- Supplementary Article / Supplementary Info Info 2: without wheel studs
- Weight [kg]: 3,7
- Item number: 19-0849
- Manufacturer: MAXGEAR
- EAN number: 5907558554960
- Condition: New
-
- TecDoc Engine Number: CJLA
- for PR number: 1KB
-
- TecDoc Engine Number: CJLA
- Fitting Position: Rear Axle
- Diameter [mm]: 239,9
- Inner brake drum diameter [mm]: 200
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 100
- Weight [kg]: 3,68
- Centering Diameter [mm]: 65
- Width [mm]: 40
- Number of mounting bores: 1
- Item number: 30 92 4034
- Manufacturer: SWAG
- EAN number: 4044688537638
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- for PR number: 1KM
- Fitting Position: Rear Axle
- Diameter [mm]: 200
- Inner brake drum height [mm]: 51
- Hole Arrangement / Number: 6 / 5
- Item number: 1163501400
- Manufacturer: JP GROUP
- EAN number: 5710412156435
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- for PR number: 1KM
- Outer brake drum diameter [mm]: 240
- Inner brake drum diameter [mm]: 200
- Inner brake drum height [mm]: 50
- Hole Arrangement / Number: 05 / 06
- Bolt Hole Circle Ø [mm]: 100
- Total brake drum height [mm]: 59
- max. brake drum reboring dimension [mm]: 201,5
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Weight [kg]: 3,7
- Centering Diameter [mm]: 65
- Wheel Bolt Bore Diameter [mm]: 15,8
- Packaging length [cm]: 26,3
- Packaging width [cm]: 25,9
- Packaging height [cm]: 8,6
- Item number: 94023800
- Manufacturer: TEXTAR
- EAN number: 4019722255168
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- for PR number: 1KB, 1KM
- Fitting Position: Rear Axle
- Outer brake drum diameter [mm]: 240,0
- Inner brake drum diameter [mm]: 200,0
- Inner brake drum height [mm]: 50,1
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100,0
- Total brake drum height [mm]: 59,1
- max. brake drum reboring dimension [mm]: 201,5
- Support plate diameter [mm]: 65,0
- MAPP code available
- Bore Diameter [mm]: 15,8
- Test Mark: E1 90R-02D0324 / 1877
- Item number: 24.0220-0037.1
- Manufacturer: ATE
- EAN number: 4006633106849
- Condition: New
price incl. 19% VAT
excl. delivery costs
- for PR number: 1KM
- Fitting Position: Rear Axle
- Outer brake drum diameter [mm]: 240
- Inner brake drum diameter [mm]: 200
- Inner brake drum height [mm]: 50
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Total brake drum height [mm]: 59
- max. brake drum reboring dimension [mm]: 201,5
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Weight [kg]: 3,7
- Centering Diameter [mm]: 65
- Wheel Bolt Bore Diameter [mm]: 15,8
- Assy. / disassy. by qualified personnel required!
- Item number: 8DT 355 300-371
- Manufacturer: HELLA
- EAN number: 4082300390292
- Condition: New
price incl. 19% VAT
excl. delivery costs
- for PR number: 1KC
- Fitting Position: Rear Axle Left, Rear Axle Right
- Diameter [mm]: 290
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 100
- max. brake drum reboring dimension [mm]: 231,5
- Weight [kg]: 6,1
- Centering Diameter [mm]: 65
- Thickness [mm]: 52,2
- Width [mm]: 39,5
- Number of mounting bores: 1
- Inner Diameter [mm]: 230
- for OE number: 1J0 609 617 B
- Item number: 184052
- Manufacturer: FEBI BILSTEIN
- EAN number: 4054224840528
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- for PR number: 1KC
- Fitting Position: Rear Axle Left, Rear Axle Right
- Diameter [mm]: 290
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 100
- max. brake drum reboring dimension [mm]: 231,5
- Weight [kg]: 6,1
- Centering Diameter [mm]: 65
- Thickness [mm]: 52,2
- Width [mm]: 39,5
- Number of mounting bores: 1
- Inner Diameter [mm]: 230
- for OE number: 1J0 609 617 B
- Item number: 33 10 9260
- Manufacturer: SWAG
- EAN number: 4054228840524
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Width [mm]: 40
- Inner brake drum diameter [mm]: 200
- Supplementary Article / Supplementary Info Info 2: with handbrake lever
- Item number: SKBS-0450001
- Our price: 14,83 €
- Manufacturer: STARK
- EAN number: 4059191293698
- Condition: New
-
- Thickness [mm]: 40
- Drum diameter [mm]: 200
- for PR number: 1KB
- Fitting Position: Rear Axle
- Diameter [mm]: 200
- Width [mm]: 40
- Weight [kg]: 1,52
- Test Mark: ECE R90 Approved
- Thickness 1 [mm]: 5
- for OE number: 1H0 698 525
- Item number: 07013
- Our price: 16,43 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816070139
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
- Fitting Position: Rear Axle
- for PR number: 1KB, 1KM
- Width [mm]: 40
- Brake System: VAG
- Inner brake drum diameter [mm]: 200
- Supplementary Article / Supplementary Info Info 2: with handbrake lever
- Item number: 06830
- Our price: 18,24 €
- Manufacturer: LPR
- EAN number: 8032532041574
- Condition: New
-
- Fitting Position: Rear Axle
- for PR number: 1KM
- Width [mm]: 40
- Brake System: VAG
- Inner brake drum diameter [mm]: 200
- Item number: 05730
- Our price: 18,33 €
- Manufacturer: LPR
- EAN number: 8032532040539
- Condition: New
-
- Construction Year to: 12 / 2017
- Fitting Position: Rear Axle
- for PR number: 1KC
- Width [mm]: 32
- Brake System: ATE
- for article number: 07300
- Inner brake drum diameter [mm]: 230
- Item number: 07300
- Our price: 19,22 €
- Manufacturer: LPR
- EAN number: 5900427026766
- Condition: New
-
- Thickness [mm]: 40
- Drum diameter [mm]: 200
- for PR number: 1KB
- Fitting Position: Rear Axle
- Diameter [mm]: 200
- Width [mm]: 40
- Weight [kg]: 1,52
- Test Mark: ECE R90 Approved
- Thickness 1 [mm]: 5
- for OE number: 1H0 698 525
- Item number: ADBP410028
- Our price: 19,33 €
- Manufacturer: BLUE PRINT
- EAN number: 5057746190354
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Diameter [mm]: 180
- Width [mm]: 31
- Brake Pad: with lining
- Item number: C0W001ABE
- Our price: 20,55 €
- Manufacturer: ABE
- EAN number: 5900427184107
- Condition: New
-
- Fitting Position: Rear Axle
- for PR number: 1KM
- Width [mm]: 40
- Weight [kg]: 1,5
- Inner brake drum diameter [mm]: 200
- Supplementary Article / Supplementary Info Info 2: with handbrake lever
- Technical Information Number: 98101 0447 0 4
- Packaging length [cm]: 19,8
- Packaging width [cm]: 12,5
- Packaging height [cm]: 8,2
- Item number: 91044700
- Our price: 21,97 €
- Manufacturer: TEXTAR
- EAN number: 4019722224577
- Condition: New
- 1
- 2
- 3
- 4
- 5