VW Passat B4 35i 1.8 Drum brake (107 hp Petrol PF)
Recommended part replacement interval for your car for the part category Drum brake: every 100.000 km
- Fitting Position: Rear Axle
- Diameter [mm]: 200
- Width [mm]: 40
- Inner brake drum diameter [mm]: 200
- Mounting Type: Pre-assembled
- Piston Diameter [mm]: 19,05
- Material wheel brake cylinder: Aluminium
- Item number: 3859B0026
- Our price: 51,34 €
- Manufacturer: RIDEX
- EAN number: 4064138222501
- Condition: New


- Fitting Position: Rear Axle
- Diameter [mm]: 200
- Width [mm]: 40
- Inner brake drum diameter [mm]: 200
- Mounting Type: Pre-assembled
- Piston Diameter [mm]: 19,05
- Material wheel brake cylinder: Aluminium
- Item number: 3859B0261
- Our price: 57,36 €
- Manufacturer: RIDEX
- EAN number: 4069197096841
- Condition: New
- Fitting Position: Rear Axle
- Width [mm]: 40
- Inner brake drum diameter [mm]: 200
- Supplementary Article / Supplementary Info Info 2: with handbrake lever
- Item number: 70B0002
- Our price: 15,60 €
- Manufacturer: RIDEX
- EAN number: 4059191241712
- Condition: New
- Fitting Position: Rear Axle, Rear Axle both sides
- Material: Cast Iron
- Bore Diameter [mm]: 20,64
- Thread Size: 1x M10x1.0
- Distance of mounting bores [mm]: 21
- Item number: 277W0010
- Manufacturer: RIDEX
- EAN number: 4059191360086
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 230
- Width [mm]: 40
- Supplementary Article / Supplementary Info: without wheel brake cylinder, with lever, with accessories
- Mounting Type: Pre-assembled
- Supplementary Info: ORIGINAL Quality
- New part without deposit
- Item number: 114 533 0006/K
- Our price: 58,96 €
- Manufacturer: MEYLE
- EAN number: 4040074076590
- Condition: New
MEYLE-KITS save time and money and make the daily Smarter than OE – this MEYLE-KIT innovates the usual With mounting materials, to fit most models. Please check fit accuracy before installation. maintenance. workshop life more efficient.


- Fitting Position: Rear Axle
- Diameter [mm]: 200
- Width [mm]: 40
- Inner brake drum diameter [mm]: 200
- Mounting Type: Pre-assembled
- Piston Diameter [mm]: 19,05
- Material wheel brake cylinder: Aluminium
- Item number: SKBSD-45990260
- Our price: 59,39 €
- Manufacturer: STARK
- EAN number: 4069197096834
- Condition: New
- Fitting Position: Rear Axle
- Brake System: VAG
- Diameter [mm]: 200
- Width [mm]: 40
- Inner brake drum diameter [mm]: 200
- Mounting Type: Pre-assembled
- Piston Diameter [mm]: 19,05
- Item number: KEG407
- Our price: 70,82 €
- Manufacturer: SAMKO
- EAN number: 2234315872672
- Condition: New
- Brake System: VAG
- Diameter [mm]: 200
- Width [mm]: 40
- Inner brake drum diameter [mm]: 200
- Mounting Type: Pre-assembled
- Product line: EASY KIT
- Material wheel brake cylinder: Aluminium
- Piston Diameter [mm]: 19,05
- Item number: OEK407
- Our price: 74,24 €
- Manufacturer: LPR
- EAN number: 8032928004718
- Condition: New
- Manufacturer Restriction: VAG, ATE
- Test Mark: E1 90R 01195 / 063
- Width [mm]: 40
- Material: Aluminium
- Supplementary Article / Supplementary Info: with wheel brake cylinder
- Inner brake drum diameter [mm]: 230
- Mounting Type: Pre-assembled
- Product line: Superkit
- Piston Diameter [mm]: 19
- Item number: GSK1514
- Our price: 80,45 €
- Manufacturer: TRW
- EAN number: 3322937932504
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Brake System: VAG
- Test Mark: R90 homologated
- Width [mm]: 40
- Weight [kg]: 3,074
- Adjustment: with automatic adjustment
- Supplementary Article / Supplementary Info: with wheel brake cylinder
- Packaging height [cm]: 9,6
- Inner brake drum diameter [mm]: 230
- Packaging width [cm]: 21,2
- Mounting Type: Pre-assembled
- Product line: MAXI KIT
- Packaging length [cm]: 23,4
- Piston Diameter [mm]: 20,6
- for brake disc diameter [mm]: 230
- Item number: FMK583
- Our price: 96,22 €
- Manufacturer: FERODO
- EAN number: 4044197728633
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Brake System: VAG
- Width [mm]: 40
- Weight [kg]: 3,074
- Adjustment: with automatic adjustment
- Supplementary Article / Supplementary Info: with accessories, with wheel brake cylinder
- Packaging height [cm]: 9,5
- Inner brake drum diameter [mm]: 230
- Packaging width [cm]: 20,3
- Mounting Type: Pre-assembled
- Product line: KIT EVO
- Packaging length [cm]: 24,2
- Piston Diameter [mm]: 20,6
- for brake disc diameter [mm]: 230
- Packing Type: Box
- Item number: 381526J
- Our price: 96,40 €
- Manufacturer: JURID
- EAN number: 4044197962846
- Condition: New
- Drum diameter [mm]: 230
- Brake System: VAG
- Width [mm]: 40
- Weight [kg]: 3,074
- Material: Aluminium
- Adjustment: with automatic adjustment
- Supplementary Article / Supplementary Info: with wheel brake cylinder
- Packaging height [cm]: 10
- Packaging width [cm]: 20,5
- Mounting Type: Pre-assembled
- Packaging length [cm]: 24
- Packing Type: Box
- for brake disc diameter [mm]: 230
- Piston Diameter [mm]: 20,6
- Item number: 381526CH
- Our price: 96,40 €
- Manufacturer: CHAMPION
- EAN number: 4060426064334
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Brake System: VAG
- Width [mm]: 40
- Weight [kg]: 2,87
- Supplementary Article / Supplementary Info: with wheel brake cylinder, with accessories
- Inner brake drum diameter [mm]: 230
- Mounting Type: Pre-assembled
- Piston Diameter [mm]: 20,6
- Item number: 111543
- Our price: 121,00 €
- Manufacturer: A.B.S.
- EAN number: 8717109703832
- Condition: New
price incl. 19% VAT
- Supplementary Info: Original VAICO Quality
- Fitting Position: Rear Axle
- Drum diameter [mm]: 200,0
- Outer brake drum diameter [mm]: 240
- Inner brake drum height [mm]: 50,5
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Total brake drum height [mm]: 81
- max. brake drum reboring dimension [mm]: 201,5
- Supplementary Article / Supplementary Info Info 2: without ABS sensor ring, without wheel bearing
- Weight [kg]: 8,57
- Support plate diameter [mm]: 50,3
- Thread Size: M 12x1,5
- Inner Diameter 2 [mm]: 39,9
- Packaging width [cm]: 28
- Packaging height [cm]: 8
- Packaging Depth [cm]: 28
- Item number: V10-60008
- Manufacturer: VAICO
- EAN number: 4046001377754
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Inner brake drum diameter [mm]: 200
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Supplementary Article / Supplementary Info Info 2: without wheel bearing
- Weight [kg]: 8,7
- Thickness [mm]: 40
- for OE number: 1H0 501 615 A
- Item number: 14060
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816140603
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Inner brake drum diameter [mm]: 200
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Supplementary Article / Supplementary Info Info 2: without wheel bearing
- Weight [kg]: 8,7
- Thickness [mm]: 40
- Item number: 30 91 4060
- Manufacturer: SWAG
- EAN number: 4044688524898
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 290
- Inner brake drum diameter [mm]: 230
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- max. brake drum reboring dimension [mm]: 231,5
- Supplementary Article / Supplementary Info Info 2: without wheel bearing
- Weight [kg]: 8,85
- Centering Diameter [mm]: 50,2
- Vehicle Identification Number (VIN) to: ******3A*S*275000
- Thickness [mm]: 84,5
- Width [mm]: 53,6
- for OE number: 357 501 615
- Item number: 14272
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816142720
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Required quantity: 2
- Outer brake drum diameter [mm]: 180
- Diameter [mm]: 211
- Number of Holes: 4
- Supplementary Article / Supplementary Info Info 2: with integrated wheel bearing
- Width [mm]: 74,5
- Inner Diameter [mm]: 180
- Item number: VKBD 0148
- Manufacturer: SKF
- EAN number: 7316571837949
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Required quantity: 2
- Outer brake drum diameter [mm]: 200
- Diameter [mm]: 240
- Number of Holes: 4
- Supplementary Article / Supplementary Info Info 2: with integrated wheel bearing
- Width [mm]: 81
- Inner Diameter [mm]: 200
- Item number: VKBD 0149
- Manufacturer: SKF
- EAN number: 7316571837956
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 290
- Inner brake drum diameter [mm]: 230
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- max. brake drum reboring dimension [mm]: 231,5
- Supplementary Article / Supplementary Info Info 2: without wheel bearing
- Weight [kg]: 8,85
- Centering Diameter [mm]: 50,2, 50,22
- Vehicle Identification Number (VIN) to: ******3A*S*275000
- Thickness [mm]: 84,5
- Width [mm]: 53,6
- Item number: 30 91 4272
- Manufacturer: SWAG
- EAN number: 4044688142726
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- 1
- 2
- 3
- 4
- 5