Chevrolet Aveo T250 1.2 Deflection / guide pulley, v-ribbed belt (76 hp Petrol LY4)
Recommended part replacement interval for your car for the part category Deflection / guide pulley, v-ribbed belt: every 70.000 km
- Belt Pulley Ø [mm]: 70,0
- Height 1 [mm]: 25,5
- Weight [kg]: 0,5
- Vehicle configuration line / variant: IDLER
- Item number: APV3394
- Our price: 21,60 €
- Manufacturer: DAYCO
- EAN number: 8021787332179
- Condition: New
-
- Construction Year from: 10 / 2008
- Vehicle type: Aveo
- Driven Units: Alternator
-
- Vehicle type: Aveo U-VA
- Driven Units: Alternator
- Diameter [mm]: 70
- Width [mm]: 22
- Item number: DIP-1004
- Our price: 67,79 €
- Manufacturer: KAVO PARTS
- EAN number: 8715616206549
- Condition: New
-
- Construction Year to: 07 / 2011
- Hub Diameter [mm]: 60
- Fitting Position: Front Axle
- Diameter [mm]: 236
- Brake Disc Type: Vented
- Supplementary Info: Original VAICO Quality
- Brake Disc Thickness [mm]: 20
- Height [mm]: 41
- Centering Diameter [mm]: 60
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 17
- Weight [kg]: 4,542
- Brake Disc Hub Height [mm]: 21,2
- Packaging width [cm]: 24
- Packaging height [cm]: 9
- Packaging Depth [cm]: 24
- Drilled: no
- Item number: V51-80003
- Manufacturer: VAICO
- EAN number: 4046001549816
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 07 / 2011
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Brake System: Akebono
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 17,6
- Height [mm]: 48,9
- Width [mm]: 133,1
- Test Mark: E9 90R-01229 / 752
- MAPP code available
- Article number of recommended accessories: 13.0460-0504.2
- Item number: 13.0460-5899.2
- Our price: 32,72 €
- Manufacturer: ATE
- EAN number: 4006633218405
- Condition: New
-
- Construction Year to: 07 / 2011
- Wheel Hub Diameter [mm]: 60
- Fitting Position: Front Axle
- Diameter [mm]: 236,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 20,0
- Height [mm]: 41
- Surface: Coated
- Centering Diameter [mm]: 60,0
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 17,0
- Inner Diameter [mm]: 123,0
- Machining: Alloyed / High-carbon
- MAPP code available
- No. of holes 2: 6
- Test Mark: E1 90R-02C0115 / 0107
- Bore Diameter [mm]: 14,0
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0120-0115.1
- Manufacturer: ATE
- EAN number: 4006633083492
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Quantity Unit: Axle Set
- Fitting Position: Front Axle
- Height 1 [mm]: 48,5
- Width 1 [mm]: 133,3
- Thickness 1 [mm]: 17,6
- for brake disc diameter [mm]: 236
- Item number: J3600911
- Our price: 27,22 €
- Manufacturer: HERTH+BUSS JAKOPARTS
- EAN number: 4029416157982
- Condition: New
quantity 1: 4
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 236
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 20
- Fitting Position: Front Axle
- Height [mm]: 41
- Centering Diameter [mm]: 59
- Number of Holes: 4
- Minimum thickness [mm]: 18
- Tightening Torque [Nm]: 120
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 09.3090.20
- Manufacturer: BREMBO
- EAN number: 8020584309025
- Condition: New
- Quantity Unit: Axle Set
- Brake System: Akebono
- Wear Warning Contact: excl. wear warning contact
- Thickness [mm]: 18
- Fitting Position: Front Axle
- Supplementary Article / Supplementary Info: without accessories
- Height [mm]: 49
- Width [mm]: 133
- WVA Number: 23974
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Item number: P 24 048
- Our price: 20,77 €
- Manufacturer: BREMBO
- EAN number: 8020584052204
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Quantity Unit: Axle Set
- Wear Warning Contact: with acoustic wear warning
- Fitting Position: Front Axle
- Length [mm]: 133,2
- Width [mm]: 48,9
- Thickness 1 [mm]: 17,5
- Test Mark: ECE R90 Approved
- Weight [kg]: 1,250
- Observe service information
- Item number: 16721
- Our price: 23,37 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816167211
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
- Construction Year to: 07 / 2011
- Hub Diameter [mm]: 60
- Diameter [mm]: 236
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 20
- Fitting Position: Front Axle
- Height [mm]: 41
- Centering Diameter [mm]: 60
- Number of Holes: 6
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 17
- Inner Diameter [mm]: 123
- Weight [kg]: 1,95
- Required quantity: 2
- Bore Diameter [mm]: 14
- Drilled: no
- Item number: 15746
- Manufacturer: MAPCO
- EAN number: 4043605008855
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 236
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 20
- Fitting Position: Front Axle
- Surface: Coated
- Centering Diameter [mm]: 59
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Thickness [mm]: 41
- Minimum thickness [mm]: 18
- Weight [kg]: 3,960
- Number of mounting bores: 2
- Observe service information
- Drilled: no
- Item number: ADG04364
- Manufacturer: BLUE PRINT
- EAN number: 5050063043648
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 236
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 20
- Fitting Position: Front Axle
- Height [mm]: 41
- Centering Diameter [mm]: 60
- Number of Holes: 6
- Thickness [mm]: 20
- Minimum thickness [mm]: 17
- Hub Diameter [mm]: 60
- Wear Warning Contact: incl. wear warning contact, with integrated wear warning contact
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: C30002ABE
- Manufacturer: ABE
- EAN number: 5900427194755
- Condition: New
- Diameter [mm]: 236
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 20
- Fitting Position: Front Axle
- Height [mm]: 41
- Centering Diameter [mm]: 59
- Number of Holes: 4
- Rim Hole Number: 6
- Thickness [mm]: 20
- Minimum thickness [mm]: 18
- Supplementary Article / Supplementary Info Info 2: with fastening material
- Drilled: no
- Item number: C30012ABE
- Manufacturer: ABE
- EAN number: 5900427194847
- Condition: New
- Diameter [mm]: 236
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 20
- Fitting Position: Front Axle
- Height [mm]: 41
- Surface: Coated
- Number of Holes: 6
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 18
- Inner Diameter [mm]: 123
- Hub Diameter [mm]: 59
- No. of holes 1: 2
- fulfils ECE norm: E1 90R-02C0064 / 0088
- Drilled: no
- Item number: J3300912
- Manufacturer: HERTH+BUSS JAKOPARTS
- EAN number: 4029416206772
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Construction Year to: 04 / 2012
- Brake System: Akebono
- Quantity Unit: Axle Set
- Wear Warning Contact: excl. wear warning contact
- Thickness [mm]: 17,5
- Height [mm]: 49
- Width [mm]: 133
- Item number: BP1359
- Our price: 40,03 €
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593810440
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Quantity Unit: Axle Set
- Brake System: AKE
- Thickness [mm]: 17,8
- Construction Year to: 07 / 2011
- Fitting Position: Front Axle
- Height [mm]: 49
- Width [mm]: 133,2
- Item number: 6725
- Our price: 33,43 €
- Manufacturer: MAPCO
- EAN number: 4043605407221
- Condition: New
- Quantity Unit: Axle Set
- Wear Warning Contact: not prepared for wear warning indicator
- Thickness [mm]: 17,8
- Product line: COTEC
- Fitting Position: Front Axle
- Height [mm]: 49
- Width [mm]: 133,2
- Test Mark: E9 90R - 01107 / 752
- Manufacturer Restriction: AKEBONO
- Item number: GDB3330
- Our price: 28,93 €
- Manufacturer: TRW
- EAN number: 3322937334421
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 07 / 2011
- Hub Diameter [mm]: 60
- Diameter [mm]: 236
- Brake Disc Type: Vented
- Supplementary Info: Original VAICO Quality
- Brake Disc Thickness [mm]: 20
- Fitting Position: Front Axle
- Height [mm]: 41
- Centering Diameter [mm]: 60
- Rim Hole Number: 4
- Bore Diameter 2 [mm]: 6,45
- Bore Diameter 1 [mm]: 14,2
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 17
- Weight [kg]: 4,252
- No. of holes 2: 6
- Brake Disc Hub Height [mm]: 21
- Packaging width [cm]: 24
- Packaging height [cm]: 8
- Packaging Depth [cm]: 24
- Drilled: no
- Item number: V40-80025
- Manufacturer: VAICO
- EAN number: 4046001206559
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Quantity Unit: Axle Set
- Wear Warning Contact: with acoustic wear warning
- Fitting Position: Front Axle
- Length [mm]: 133
- Width [mm]: 49
- Thickness 1 [mm]: 18
- Test Mark: ECE R90 Approved
- Weight [kg]: 1,250
- Observe service information
- Item number: ADG04257
- Our price: 22,20 €
- Manufacturer: BLUE PRINT
- EAN number: 5050063042573
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Quantity Unit: Axle Set
- Brake System: AKEBONO
- Wear Warning Contact: not prepared for wear warning indicator
- Thickness [mm]: 17,8
- Fitting Position: Front Axle
- Height [mm]: 49
- Width [mm]: 133,2
- Item number: C10013ABE
- Our price: 22,54 €
- Manufacturer: ABE
- EAN number: 5900427184411
- Condition: New