Vehicle identification number: 2233AAM
Kia Picanto JA 1.0 Crankshaft sensor (67 hp Petrol G3LD)
- Connector Shape: triangular
- Number of mounting bores: 2
- Rated Voltage [V]: 12
- Additionally required articles (article numbers): Plug cover
- Cable Length 1 [mm]: 360
- Operating temperature from [°C]: -40
- Operating temperature to [°C]: 125
- Sensor Type: Hall Sensor
- Colour: black
- Item number: CKP184.02
- Our price: 22,49 €
- Manufacturer: SNR
- EAN number: 3413522224958
- Condition: New
- Number of pins: 3
- Number of connectors: 3
- Product line: Original Quality
- Height [mm]: 28
- Supplementary Article / Supplementary Info Info 2: with seal ring
- Rated Voltage [V]: 12
- Resistor [kOhm]: 18
- Weight [kg]: 0,028
- Packaging width [cm]: 4
- Packaging height [cm]: 6,7, 5,4
- Packaging Depth [cm]: 6,8, 4,4
- Item number: V24-72-0035
- Our price: 32,99 €
- Manufacturer: VEMO
- EAN number: 4046001394324
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. the designated use. Please note that our products are usually delivered without Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use. unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Number of pins: 3
- Number of connectors: 3
- Supplementary Info: Q+, original equipment manufacturer quality
- Height [mm]: 28
- Rated Voltage [V]: 12
- Fitting Depth [mm]: 28
- Supplementary Article / Supplementary Info Info 2: without cable
- Connector Shape: rectangular
- Weight [kg]: 0,02
- Packaging width [cm]: 4, 2,8
- Packaging height [cm]: 6,7, 4
- Packaging Depth [cm]: 6,8, 5,5
- Item number: V52-72-0107
- Our price: 63,49 €
- Manufacturer: VEMO
- EAN number: 4046001612831
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. the designated use. Please note that our products are usually delivered without Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use. unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 234
- Brake Disc Type: solid
- Drilled: no
- Brake Disc Thickness [mm]: 10
- Height [mm]: 37,25
- Centering Diameter [mm]: 62,5
- Number of Holes: 4
- Minimum thickness [mm]: 8,4
- Depth [mm]: 37,2
- Mounting Type: Bolted
- Item number: C40312ABE
- Manufacturer: ABE
- EAN number: 5900427202801
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 234
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 10
- Height [mm]: 37,5
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 8,4
- Inner Diameter [mm]: 142
- Hub Diameter [mm]: 62,5
- No. of holes 1: 2
- fulfils ECE norm: E1 90R-02C0121 / 0213
- Item number: J3310316
- Manufacturer: HERTH+BUSS JAKOPARTS
- EAN number: 4029416217204
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 234
- Construction Year from: 04 / 2017
- Brake Disc Type: solid
- Drilled: no
- Surface: Oiled
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- TecDoc Engine Number: G3LA
- Brake Disc Thickness [mm]: 10
- Height [mm]: 37,5
- Centering Diameter [mm]: 62,5
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 8,4
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 12,5
- Item number: 0 986 479 256
- Manufacturer: BOSCH
- EAN number: 4047024226982
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 234
- Brake Disc Type: solid
- Drilled: no
- Surface: Painted
- Brake Disc Thickness [mm]: 10
- Height [mm]: 37,5
- Centering Diameter [mm]: 62,5
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 8,4
- Thread Size: 12,5
- Colour: black
- Test Mark: E190R-02C0190 / 0543
- Item number: DF4801
- Manufacturer: TRW
- EAN number: 3322937885220
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 234
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 62,5
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Thickness [mm]: 37
- Minimum thickness [mm]: 8,4
- Number of mounting bores: 2
- Observe service information
- Item number: ADG04396
- Manufacturer: BLUE PRINT
- EAN number: 5050063043969
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Diameter [mm]: 234
- Construction Year from: 04 / 2017
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- TecDoc Engine Number: G3LA
- Brake Disc Thickness [mm]: 10
- Height [mm]: 37,5
- Centering Diameter [mm]: 62,5
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 8,4
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 12,5
- Item number: 0 986 479 B95
- Manufacturer: BOSCH
- EAN number: 4646546749879
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 233,8
- Brake Disc Type: solid
- Drilled: no
- Surface: Uncoated
- Machining: Untreated
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Brake Disc Thickness [mm]: 10
- Height [mm]: 37,5
- Material: Cast Iron
- Centering Diameter [mm]: 62,6
- Number of Holes: 4 / 6
- Wheel Bolt Bore Diameter [mm]: 12,6
- Bolt Hole Circle Ø [mm]: 100
- Braking System: for vehicles with disc brakes on the rear axle
- Item number: 82B0041
- Manufacturer: RIDEX
- EAN number: 4059191315598
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 234
- Brake Disc Type: solid
- Drilled: no
- Brake Disc Thickness [mm]: 10
- Height [mm]: 37,5
- Centering Diameter [mm]: 62,5
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 8
- Inner Diameter [mm]: 142
- Bore Diameter [mm]: 12,6
- Item number: 45572
- Manufacturer: MAPCO
- EAN number: 4043605445735
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 234
- Brake Disc Type: solid
- Drilled: no
- Height [mm]: 38
- Centering Diameter [mm]: 62
- Rim Hole Number: 4
- Minimum thickness [mm]: 8,4
- Item number: K2013P
- Manufacturer: LPR
- EAN number: 8032928084871
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 234
- Brake Disc Type: solid
- Drilled: no
- Brake Disc Thickness [mm]: 10
- Height [mm]: 37,5
- Centering Diameter [mm]: 62
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 8,4
- Item number: BDC5568
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438200942
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 234,0
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 10,0
- Height [mm]: 37,5
- Centering Diameter [mm]: 62,5
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 8,0
- Inner Diameter [mm]: 142,0
- MAPP code available
- Test Mark: E1 90R-02C0165 / 0917
- Bore Diameter [mm]: 12,6
- Item number: 24.0110-0324.1
- Manufacturer: ATE
- EAN number: 4006633306683
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 241
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 18
- Centering Diameter [mm]: 62
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Thickness [mm]: 49
- Minimum thickness [mm]: 16
- Number of mounting bores: 2
- Observe service information
- Item number: ADG04397
- Manufacturer: BLUE PRINT
- EAN number: 5050063043976
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 234
- Brake Disc Type: solid
- Drilled: no
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Product line: Prime
- Brake Disc Thickness [mm]: 10
- Height [mm]: 38
- Centering Diameter [mm]: 63
- Number of Holes: 4
- Minimum thickness [mm]: 8,4
- Tightening Torque [Nm]: 100
- Item number: 08.A916.10
- Manufacturer: BREMBO
- EAN number: 8020584024423
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Paired product: 573811J
- Diameter [mm]: 234
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Brake Disc Thickness [mm]: 10
- Height [mm]: 37,7
- Centering Diameter [mm]: 62,5
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 8,5
- Weight [kg]: 6,05
- Tightening Torque [Nm]: 100
- Version: JC
- Test Mark: R90 Homologated
- Packing Type: Box
- Packaging width [cm]: 25
- Packaging height [cm]: 9,5
- Item number: 562429JC
- Manufacturer: JURID
- EAN number: 3306437219822
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 234
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Product line: COAT Z
- Brake Disc Thickness [mm]: 10
- Height [mm]: 38
- Centering Diameter [mm]: 62
- Rim Hole Number: 4
- Hole Arrangement / Number: 6 / 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 8,4
- Weight [kg]: 3
- Test Mark: ECE R90 APPROVED
- Item number: 285.3511.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238752585
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 233,8
- Brake Disc Type: solid
- Drilled: no
- Surface: Uncoated
- Machining: Untreated
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Brake Disc Thickness [mm]: 10
- Height [mm]: 37,5
- Material: Cast Iron
- Centering Diameter [mm]: 62,6
- Number of Holes: 4 / 6
- Wheel Bolt Bore Diameter [mm]: 12,6
- Bolt Hole Circle Ø [mm]: 100
- Item number: SKBD-0020042
- Manufacturer: STARK
- EAN number: 4059191040674
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 234
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Product line: COATED
- Brake Disc Thickness [mm]: 10
- Height [mm]: 37,5
- Centering Diameter [mm]: 63
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 8,4
- Hub Diameter [mm]: 155
- Weight [kg]: 2,94
- Item number: 17656
- Manufacturer: A.B.S.
- EAN number: 8717109375039
- Condition: New
price incl. 19% VAT
excl. delivery costs