Vehicle identification number: 1004ADV
Jeep Grand Cherokee wk2 6.4 SRT8 4x4 Crankshaft sensor (468 hp Petrol ESG)
- Number of pins: 3
- Fabrication Number: ECP-CH-025
- Item number: ECP-CH-025
- Our price: 25,99 €
- Manufacturer: NTY
- EAN number: 5902048061737
- Condition: New
- Number of pins: 3
- Fitting Depth [mm]: 19
- Item number: 8855 80129
- Our price: 19,49 €
- Manufacturer: KAWE
- EAN number: 2228614373692
- Condition: New
- Supplementary Article / Supplementary Info Info 2: without cable
- Required quantity: 1
- Item number: 60543
- Our price: 20,49 €
- Manufacturer: BREMI
- EAN number: 4017534212379
- Condition: New
- Fitting Position: Front Axle
- Diameter: 305
- Construction Year from: 07 / 2011
- Brake Disc Type: Vented
- Drilled: no
- Supplementary Info: Original VAICO Quality
- Brake Disc Thickness: 26
- Height [mm]: 63,5
- Centering Diameter [mm]: 72
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 127
- Minimum thickness [mm]: 24,5
- Brake Disc Hub Height [mm]: 37,5
- Packaging width [cm]: 32
- Packaging height [cm]: 13
- Packaging Depth [cm]: 32
- Item number: V33-80010
- Manufacturer: VAICO
- EAN number: 4046001550713
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Brake System: Brembo
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
-
- Brake Disc Type: Perforated
- Equipment Code: BR4
- Thickness [mm]: 15
- Quantity Unit: Axle Set
- Height [mm]: 69,3
- Width [mm]: 109,8
- Test Mark: E1 90R-01787 / 596
- MAPP code available
- Article number of recommended accessories: 13.0460-0524.2
- Item number: 13.0460-4964.2
- Our price: 93,49 €
- Manufacturer: ATE
- EAN number: 4006633272148
- Condition: New
- Fitting Position: Front Axle
- Brake System: TRW
- Wear Warning Contact: with acoustic wear warning
- Supplementary Article / Supplementary Info: without accessories
- Supplementary Article / Supplementary Info Info 2: with piston clip
-
- Suspension: for vehicles without heavy duty suspension
- Rim Size [inch]: 18, 17
- Thickness [mm]: 19,1
- Product line: PREMIER
- Quantity Unit: Axle Set
- Number of wear indicators [per axle]: 2
- Height 1 [mm]: 64,1
- Width [mm]: 193,1
- Width 1 [mm]: 194,3
- WVA Number: 25190, 25191, 25192
- Test Mark: R90 Homologated
- Weight [kg]: 2,631
- Quantity per axle: 1, 4
- Packing Type: Box
- Packaging length [cm]: 21,2
- Packaging width [cm]: 12,6
- Packaging height [cm]: 7,8
- Item number: FDB4403
- Our price: 65,49 €
- Manufacturer: FERODO
- EAN number: 4044197562572
- Condition: New
- Fitting Position: Front Axle
- Brake System: ATE
- Wear Warning Contact: with acoustic wear warning
- Supplementary Article / Supplementary Info: without accessories
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Equipment Code: BRY, BR6
- Quantity Unit: Axle Set
- Height 1 [mm]: 64,4
- Height 2 [mm]: 64,2
- Width 2 [mm]: 193,4
- Width 1 [mm]: 194,6
- Thickness 1 [mm]: 19,1
- Thickness 2 [mm]: 19,1
- WVA Number: 25190, 25191, 25192
- Test Mark: E9 90R-01841 / 3192
- FMSI Code: D1455-8655
- Friction Lining Material: Semi-Metallic
- Item number: LP2275
- Our price: 48,99 €
- Manufacturer: DELPHI
- EAN number: 5012759463888
- Condition: New
2 pads + spring clips, 2 pads + spring W.I. handed
- Fitting Position: Rear Axle
- Brake System: Brembo
- Wear Warning Contact: incl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Supplementary Article / Supplementary Info Info 2: with adhesive film
- Thickness [mm]: 15,4
- Quantity Unit: Axle Set
- Number of wear indicators [per axle]: 4
- Length [mm]: 109,7
- Height [mm]: 69,3
- Weight [kg]: 1,623
- Item number: 0434.54
- Our price: 46,49 €
- Manufacturer: REMSA
- EAN number: 8427975028884
- Condition: New
- Fitting Position: Rear Axle
- Brake System: ATE
- Wear Warning Contact: with acoustic wear warning
- Supplementary Article / Supplementary Info: with accessories, with spring
- Supplementary Article / Supplementary Info Info 2: with adhesive film
- Thickness [mm]: 18
- Quantity Unit: Axle Set
- Number of wear indicators [per axle]: 2
- Length [mm]: 140,2, 141,5
- Height [mm]: 50,9
- Height 2 [mm]: 59,5
- Item number: 1446.02
- Our price: 38,49 €
- Manufacturer: REMSA
- EAN number: 8427975032669
- Condition: New
- Fitting Position: Rear Axle
- Brake System: BR4
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 15,4
- Quantity Unit: Axle Set
- Height [mm]: 69,3
- Width [mm]: 109,7
- Test Mark: E9 90R - 01120 / 877
- Manufacturer Restriction: BREMBO
- Item number: GDB4171
- Our price: 56,49 €
- Manufacturer: TRW
- EAN number: 3322937942046
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter: 286
- Brake Disc Type: Vented
- Drilled: no
- Supplementary Info: Original VAICO Quality
- Brake Disc Thickness: 22
- Height [mm]: 60
- Centering Diameter [mm]: 80
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 19,4
- Weight [kg]: 7,283
- Brake Disc Hub Height [mm]: 38
- Packaging width [cm]: 30
- Packaging height [cm]: 12
- Packaging Depth [cm]: 30
- Item number: V30-80032
- Manufacturer: VAICO
- EAN number: 4046001169861
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Construction Year from: 09 / 2014
- Quantity Unit: Axle Set
- Length [mm]: 190
- Width [mm]: 93
- Thickness 1 [mm]: 19
- Weight [kg]: 4,196
- Observe service information
- Item number: ADN142143
- Our price: 404,50 €
- Manufacturer: BLUE PRINT
- EAN number: 5050063008296
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Fitting Position: Front Axle
- Brake System: BR2, BR6, BRY
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 19
- Supplementary Info: DTEC COTEC
- Quantity Unit: Axle Set
- Height [mm]: 64,1
- Width [mm]: 194,5
- Test Mark: E9 90R - 01107 / 3071
- Manufacturer Restriction: ATE
- Item number: GDB4603
- Our price: 55,99 €
- Manufacturer: TRW
- EAN number: 3322938100698
- Condition: New
- Fitting Position: Rear Axle
- Diameter: 330
- Brake Disc Type: solid
- Drilled: no
- Brake Disc Thickness: 14
- Height [mm]: 64
- Number of bores: 5
- Bolt Hole Circle Ø [mm]: 72
- Minimum thickness [mm]: 12
- Manufacturer Restriction: BRY
- Item number: DP-909
- Manufacturer: JAPANPARTS
- EAN number: 8033001790160
- Condition: New
price incl. 19% VAT
- Fitting Position: Front Axle
- Brake System: TRW
-
- Suspension: for vehicles without heavy duty suspension
- suitable for rim size [inch]: 18, 17
- Thickness [mm]: 19
- Quantity Unit: Axle Set
- Length [mm]: 193
- Height [mm]: 64
- WVA Number: 25190, 25191, 25192
- Test Mark: ECE R90 APPROVED
- Brake Type: Disc Brake
- for OE number: 68052369AA
- Item number: PA-915AF
- Our price: 73,99 €
- Manufacturer: JAPANPARTS
- EAN number: 8033001787696
- Condition: New
- Fitting Position: Front Axle
- Diameter: 350
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Brake Disc Thickness: 32
- Centering Diameter [mm]: 72
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 127
- Thickness [mm]: 55
- Minimum thickness [mm]: 30,5
- Observe service information
- Item number: ADA104363
- Manufacturer: BLUE PRINT
- EAN number: 5050063083668
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
- Fitting Position: Front Axle
- Diameter: 304,7
- Construction Year from: 07 / 2011
- Brake Disc Type: Vented, internally vented
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness: 26
- Height [mm]: 63,6
- Centering Diameter [mm]: 72
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 127
- Minimum thickness [mm]: 24,5
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 15,8
- Item number: 0 986 478 772
- Manufacturer: BOSCH
- EAN number: 4047024095724
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Brake System: ATE
- Wear Warning Contact: with acoustic wear warning
- Supplementary Article / Supplementary Info: without accessories
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Equipment Code: BR6, BRY
- Quantity Unit: Axle Set
- Height 1 [mm]: 51,8
- Height 2 [mm]: 59,6
- Width 2 [mm]: 141,7
- Width 1 [mm]: 140,5
- Thickness 1 [mm]: 17,5
- Thickness 2 [mm]: 17,5
- WVA Number: 25198, 25196, 25197
- Test Mark: E9 90R-01825 / 3025
- FMSI Code: D1498-8698
- Friction Lining Material: Semi-Metallic
- Item number: LP2251
- Our price: 39,49 €
- Manufacturer: DELPHI
- EAN number: 5012759463864
- Condition: New
2 plain pads, 2 pads + W.I.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Brake System: X84, BR1
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 21,2
- Quantity Unit: Axle Set
- Height [mm]: 64,1
- Width [mm]: 194,5
- Test Mark: E9 90R - 01107 / 3071
- Manufacturer Restriction: ATE
- Item number: GDB4604
- Our price: 72,49 €
- Manufacturer: TRW
- EAN number: 3322938100759
- Condition: New
- Fitting Position: Front Axle
- Brake System: ATE
- Wear Warning Contact: without integrated wear warning contact, with acoustic wear warning
- Equipment Code: BR1 / BR2 / BR3 / BR6, BRY
- Thickness [mm]: 21,3
- Quantity Unit: Axle Set
- Height [mm]: 64,1
- Width [mm]: 193,1
- Test Mark: E1 90R-02A0612 / 0595
- MAPP code available
- Item number: 13.0460-7282.2
- Our price: 94,49 €
- Manufacturer: ATE
- EAN number: 4006633386401
- Condition: New