Vehicle identification number: 0999398
Mercedes S211 E 320 CDI 3.0 Control unit, heating / ventilation (224 hp Diesel OM 642.920)
- Length [mm]: 110
- Width [mm]: 65
- Number of connectors: 6
- Item number: 27-2186
- Our price: 88,49 €
- Manufacturer: MAXGEAR
- EAN number: 5907057305681
- Condition: New
- Vehicle Equipment: for vehicles with air conditioning
- Item number: 55491
- Our price: 139,99 €
- Manufacturer: AIC
- EAN number: 4046283554911
- Condition: New
Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use.
For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules.
If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at:
Phone: 040 - 25 30 66 55 Email: [email protected]
This often avoids extensive troubleshooting that is disproportionate to normal repair times.
The following applies to complaints: The more complete the processes are submitted, the faster they can be processed.
Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
price incl. 19% VAT
- Engine Code: OM642920
- Length [mm]: 110
- Width [mm]: 65
- Thickness: 40
- Number of connectors: 6
- Weight [kg]: 0,203
- Item number: 31335
- Our price: 75,49 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816313359
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Engine Code: OM642920
- Length [mm]: 110
- Width [mm]: 65
- Thickness: 40
- Number of connectors: 6
- Weight [kg]: 0,203
- Item number: 10 93 1335
- Our price: 84,49 €
- Manufacturer: SWAG
- EAN number: 4044688313355
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Vehicle Equipment: for vehicles with air conditioning
- Product line: ORIGINAL ERSATZTEIL
- Version: OE
- Item number: 0917105
- Our price: 96,49 €
- Manufacturer: METZGER
- EAN number: 4250032651466
- Condition: New
- Fitting Position: Front Axle
- Diameter: 312
- Brake Disc Type: Vented
- Drilled: no
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Brake Disc Thickness: 28
- Height: 64,5
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Thickness: 28
- Minimum thickness [mm]: 25,4
- Item number: C3M053ABE
- Manufacturer: ABE
- EAN number: 5900427200579
- Condition: New
price incl. 19% VAT
- Fitting Position: Rear Axle
- Diameter: 300
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Brake Disc Thickness: 22,0
- Height: 65,5
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 19,4
- Inner Diameter [mm]: 180
- Bore Diameter [mm]: 15,3
- Item number: C4M029ABE
- Manufacturer: ABE
- EAN number: 5901655214789
- Condition: New
price incl. 19% VAT
- Fitting Position: Front Axle
- Diameter: 295
- Brake Disc Type: Vented
- Drilled: no
- Brake Disc Thickness: 28
- Height: 54,5
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 25
- Item number: BDC5414
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438055405
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter: 312
- Brake Disc Type: Vented
- Drilled: no
- Brake Disc Thickness: 28
- Height: 64,6
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 25,4
- Item number: BDC5465
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438055443
- Condition: New
price incl. 19% VAT
- Fitting Position: Front Axle
- Brake System: Brembo
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Thickness: 17,4
- Product line: Ceramic
- Quantity Unit: Axle Set
- Height: 71,7
- Width [mm]: 119,5
- Test Mark: E9 90R-02A1396 / 0282
- MAPP code available
- Article number of recommended accessories: 13.0460-0155.2, 13.0460-0237.2, 13.0460-0275.2, 24.8190-0410.2, 24.8190-0416.2
- Observe dimensions
- Bore Distance 1 [mm]: 1,8
- Bore Distance 2 [mm]: 7,1
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-4990.2
- Our price: 78,99 €
- Manufacturer: ATE
- EAN number: 4006633346771
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
- Fitting Position: Rear Axle
- Diameter: 300,0
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Brake Disc Thickness: 22,0
- Height: 68,0
- Centering Diameter [mm]: 67,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 19,4
- Inner Diameter [mm]: 180,0
- MAPP code available
- Test Mark: E1 90R-02C0296 / 1061
- Bore Diameter [mm]: 15,3
- Item number: 24.0122-0201.1
- Manufacturer: ATE
- EAN number: 4006633130127
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter: 312,0
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Machining: Alloyed / High-carbon
- Vehicle Equipment: for vehicles without sports package, for vehicles without AMG sports package
- Brake Disc Thickness: 28,0
- Height: 64,5
- Centering Diameter [mm]: 67,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 25,4
- Inner Diameter [mm]: 154,0
- MAPP code available
- Bore Diameter [mm]: 15,3
- Item number: 24.0128-0142.1
- Manufacturer: ATE
- EAN number: 4006633130189
- Condition: New
price incl. 19% VAT
- Fitting Position: Front Axle
- Diameter: 312
- Brake Disc Type: Vented
- Drilled: no
- Surface: Oiled
- Vehicle Equipment: for vehicles without sports package
- Brake Disc Thickness: 28
- Height: 64
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Minimum thickness [mm]: 25,4
- Test Mark: E1 90R-02C0074 / 1582
- Item number: BG3756
- Manufacturer: DELPHI
- EAN number: 5012759280539
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter: 300
- Brake Disc Type: Vented
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness: 22
- Height: 68
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Minimum thickness [mm]: 19,4
- Test Mark: E1 90R-02C0957 / 2557
- Item number: BG3758
- Manufacturer: DELPHI
- EAN number: 5012759280553
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Construction Year from: 04 / 2005
- Wear Warning Contact: incl. wear warning contact
- Material: Low-Metallic
- Supplementary Article / Supplementary Info: with accessories
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Thickness: 20
- Quantity Unit: Axle Set
- Height: 67,6
- Width [mm]: 136,6
- WVA Number: 23743
- Test Mark: ECE-R90
- Article number of recommended accessories: 1987473070, 1987473586, 1987474966, 1987474743, 1987474338
- Observe technical data
- Item number: 0 986 494 285
- Our price: 41,49 €
- Manufacturer: BOSCH
- EAN number: 4047024666856
- Condition: New
- Fitting Position: Rear Axle
- Diameter: 300
- Brake Disc Type: solid
- Drilled: no
- Brake Disc Thickness: 10
- Height: 68,5
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 8,3
- Item number: BDC5415
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438055412
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter: 300
- Brake Disc Type: Vented
- Drilled: no
- Brake Disc Thickness: 22
- Height: 68,2
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 19,4
- Item number: BDC5466
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438055450
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Brake System: Brembo
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Thickness: 17,4
- Quantity Unit: Axle Set
- Height: 71,7
- Width [mm]: 119,5
- Test Mark: E9 90R-02A1279 / 0282
- MAPP code available
- Article number of recommended accessories: 13.0460-0155.2, 13.0460-0237.2, 13.0460-0275.2, 24.8190-0410.2, 24.8190-0416.2, 13.0460-0503.2, 13.0460-0507.2
- Observe dimensions
- Bore Distance 1 [mm]: 1,8
- Bore Distance 2 [mm]: 7,1
- Item number: 13.0460-4990.2
- Our price: 61,49 €
- Manufacturer: ATE
- EAN number: 4006633104418
- Condition: New
- Fitting Position: Rear Axle
- Brake System: ATE
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Thickness: 16,7
- Quantity Unit: Axle Set
- Height 1 [mm]: 59,6
- Height 2 [mm]: 57,5
- Width 2 [mm]: 139,8
- Width 1 [mm]: 141,1
- Test Mark: E9 90R-02A1382 / 4357
- MAPP code available
- Article number of recommended accessories: 24.8190-0410.2
- Item number: 13.0460-7259.2
- Our price: 45,49 €
- Manufacturer: ATE
- EAN number: 4006633348300
- Condition: New
- Fitting Position: Rear Axle
- Brake System: ATE
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Thickness: 16,7
- Product line: Ceramic
- Quantity Unit: Axle Set
- Height 1 [mm]: 59,6
- Height 2 [mm]: 57,5
- Width 2 [mm]: 139,8
- Width 1 [mm]: 141,1
- Test Mark: E9 90R-02A1242 / 4357
- MAPP code available
- Article number of recommended accessories: 24.8190-0410.2
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-7259.2
- Our price: 62,99 €
- Manufacturer: ATE
- EAN number: 4006633376396
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.