Vehicle identification number: 0603BNV
Polo 6R 1.4 TDI Control unit, glow plug system (90 hp Diesel CUSB)
- Number of connectors: 8
- Weight [kg]: 0,047
- Item number: 184290
- Our price: 58,49 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4054224842904
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Engine Compartment
- Supplementary Info: Original VEMO Quality
- Voltage [V]: 12
- Colour: black
- Number of pins: 4
- Number of connectors: 4
- Rated Voltage [V]: 12
- Relay function: Clamp 87, Terminal 30, Normally open contact
- Supplementary Article / Supplementary Info Info 2: with resistor
- Housing Colour: black
- Rated current [A]: 70
- Packaging height [cm]: 6,7
- Packaging Depth [cm]: 6,8
- Item number: V30-71-0041
- Our price: 12,99 €
- Manufacturer: VEMO
- EAN number: 4046001880759
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Combi Switch Function: Normally Open Contact
- Current Strength [A]: 70
- Voltage [V]: 12
- Number of pins: 4
- Relay function: Normally open contact
- Temperature range from [°C]: -40
- Temperature range to [°C]: 85
- Item number: 0 986 332 002
- Our price: 14,99 €
- Manufacturer: BOSCH
- EAN number: 3165143407790
- Condition: New
- Item number: 2502095
- Our price: 45,99 €
- Manufacturer: HITACHI
- EAN number: 4044079020954
- Condition: New
Sold in Hitachi brand: printing and packaging
- Fitting Position: Rear Axle
- Diameter [mm]: 232
- Brake Disc Type: solid
- Drilled: no
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Brake Disc Thickness [mm]: 9
- Height [mm]: 39,3
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Rim Hole Number: 5
- Thickness [mm]: 9
- Minimum thickness [mm]: 7
- Wear Warning Contact: incl. wear warning contact, with integrated wear warning contact
- Item number: C4W000ABE
- Manufacturer: ABE
- EAN number: 5900427206663
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 230
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Product line: Prime
- Brake Disc Thickness [mm]: 9
- Height [mm]: 40
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 7
- Tightening Torque [Nm]: 120
- Item number: 08.7165.11
- Manufacturer: BREMBO
- EAN number: 8020584018132
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 230
- for PR number: 1KK, 1KT, 2EJ
- Brake Disc Type: solid
- Drilled: no
- Brake Disc Thickness [mm]: 9
- Height [mm]: 40
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 7
- Item number: A1441P
- Manufacturer: LPR
- EAN number: 8032532068663
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Drilled: no
- Brake Disc Thickness [mm]: 25
- Height [mm]: 34,2
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 22
- Item number: BDC4735
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593583825
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 232
- Brake Disc Type: solid
- Drilled: no
- Brake Disc Thickness [mm]: 9
- Height [mm]: 39,3
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 7
- Item number: BDC4753
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593583863
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Brake System: Lucas / TRW
- for PR number: 1KK, 1KT, 2EJ
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Thickness [mm]: 17,2
- Quantity Unit: Axle Set
- Height [mm]: 52,9
- Width [mm]: 87,6
- Test Mark: E1 90R-02A0333 / 0192, E1 90R-02A0650 / 0200
- MAPP code available
- Article number of recommended accessories: 13.0460-0072.2
- Number of bolts / screws: 4
- Observe dimensions
- Item number: 13.0460-2820.2
- Our price: 25,99 €
- Manufacturer: ATE
- EAN number: 4006633289542
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Brake System: ATE
- for PR number: 1LN, 1ZC
- Wear Warning Contact: incl. wear warning contact
- Thickness [mm]: 20,6
- Quantity Unit: Axle Set
- Number of wear indicators [per axle]: 1
- Height 1 [mm]: 66,0
- Height 2 [mm]: 71,3
- Width 2 [mm]: 156,3
- Width 1 [mm]: 155,1
- Test Mark: E1 90R-02A0334 / 0194
- Warning Contact Length [mm]: 155
- MAPP code available
- Item number: 13.0460-7184.2
- Our price: 46,49 €
- Manufacturer: ATE
- EAN number: 4006633118033
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Brake System: Lucas / TRW
- for PR number: 1KK, 1KT, 2EJ
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Thickness [mm]: 17,2
- Product line: Ceramic
- Quantity Unit: Axle Set
- Height [mm]: 52,9
- Width [mm]: 87,6
- Test Mark: E1 90R-02A0258 / 0193
- MAPP code available
- Article number of recommended accessories: 13.0460-0072.2
- Number of bolts / screws: 4
- Observe dimensions
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-2820.2
- Our price: 37,49 €
- Manufacturer: ATE
- EAN number: 4006633339483
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
- Fitting Position: Rear Axle
- Brake System: Lucas / TRW
- for PR number: 2EJ
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Thickness [mm]: 17,2
- Product line: Ceramic
- Quantity Unit: Axle Set
- Height [mm]: 52,9
- Width [mm]: 87,6
- Test Mark: E1 90R-02A0258 / 0193
- MAPP code available
- Article number of recommended accessories: 13.0460-0072.2
- Number of bolts / screws: 4
- Observe dimensions
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-2894.2
- Our price: 36,99 €
- Manufacturer: ATE
- EAN number: 4006633339629
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Brake Disc Thickness [mm]: 22
- Height [mm]: 36,5
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Rim Hole Number: 5
- Thickness [mm]: 22
- Minimum thickness [mm]: 19
- Wear Warning Contact: incl. wear warning contact
- Item number: C3W001ABE
- Manufacturer: ABE
- EAN number: 5900427201651
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake System: TRW
- for PR number: 1LN, 1ZC
- Brake Disc Type: internally vented
- Drilled: no
- Brake Disc Thickness [mm]: 25
- Height [mm]: 34,2
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Item number: A1451V
- Manufacturer: LPR
- EAN number: 8032532068670
- Condition: New
price incl. 19% VAT
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake System: ATE
- for PR number: 1LR, 1ZG, 1ZJ
- Brake Disc Type: internally vented
- Drilled: no
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 19
- Item number: A1461V
- Manufacturer: LPR
- EAN number: 8032532068687
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Drilled: no
- Brake Disc Thickness [mm]: 22
- Height [mm]: 36,6
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 19
- Item number: BDC4669
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593583740
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Brake System: Lucas / TRW
- for PR number: 2EJ
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Thickness [mm]: 17,2
- Quantity Unit: Axle Set
- Height [mm]: 52,9
- Width [mm]: 87,6
- Test Mark: E1 90R-02A0333 / 0221, E1 90R-02A0650 / 0200
- MAPP code available
- Article number of recommended accessories: 13.0460-0072.2
- Number of bolts / screws: 4
- Observe dimensions
- Item number: 13.0460-2894.2
- Our price: 27,49 €
- Manufacturer: ATE
- EAN number: 4006633201643
- Condition: New
- Fitting Position: Front Axle
- Brake System: Volkswagen
- for PR number: 1ZG, 1LR, 1ZJ
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 19,6
- Quantity Unit: Axle Set
- Height [mm]: 54,7
- Width [mm]: 146,0
- Test Mark: E1 90R-02A0335 / 0211
- MAPP code available
- Item number: 13.0460-7111.2
- Our price: 38,99 €
- Manufacturer: ATE
- EAN number: 4006633302050
- Condition: New
- Fitting Position: Front Axle
- Brake System: Volkswagen
- for PR number: 1ZG, 1LR, 1ZJ
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 19,6
- Product line: Ceramic
- Quantity Unit: Axle Set
- Height [mm]: 54,7
- Width [mm]: 146,0
- Test Mark: E1 90R-02A0258 / 0212
- MAPP code available
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-7111.2
- Our price: 57,99 €
- Manufacturer: ATE
- EAN number: 4006633339919
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.