Vehicle identification number: 0603AOF
Golf Mk6 1.6 MultiFuel Control unit, glow plug system (102 hp Petrol/Ethanol CMXA)
- Current Strength [A]: 30
- Voltage [V]: 12
- Number of pins: 5
- Relay function: Normally open contact
- Protection Type (IP Code): IP5K4
- Combi Switch Function: Normally Open Contact
- Temperature range from [°C]: -40
- Temperature range to [°C]: 100
- Resistor [Ohm]: 16
- Item number: 0 332 201 107
- Our price: 4,99 €
- Manufacturer: BOSCH
- EAN number: 1165244314678
- Condition: New
- Item number: B17815
- Our price: 7,29 €
- Manufacturer: Borsehung
- EAN number: 4251475104632
- Condition: New
- Fitting Position: Engine Compartment
- Supplementary Info: Original VEMO Quality
- Voltage [V]: 12
- Colour: black
- Number of pins: 4
- Number of connectors: 4
- Rated Voltage [V]: 12
- Relay function: Clamp 87, Terminal 30, Normally open contact
- Supplementary Article / Supplementary Info Info 2: with resistor
- Housing Colour: black
- Rated current [A]: 70
- Packaging height [cm]: 6,7
- Packaging Depth [cm]: 6,8
- Item number: V30-71-0041
- Our price: 15,49 €
- Manufacturer: VEMO
- EAN number: 4046001880759
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- TecDoc Engine Number: CMXA
- Current Strength [A]: 40
- Relay function: Terminal 30, Clamp 87
- Rated current [A]: 40
- Weight [kg]: 0,04
- Product line: Q+, original equipment manufacturer quality MADE IN GERMANY
- Packaging width [cm]: 2,585
- Packaging height [cm]: 3,964
- Packaging Depth [cm]: 2,585
- Item number: V15-71-0005
- Our price: 14,49 €
- Manufacturer: VEMO
- EAN number: 4046001270338
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Current Strength [A]: 20
- Item number: B17810
- Our price: 6,29 €
- Manufacturer: Borsehung
- EAN number: 224815107061741070617
- Condition: New
- Diameter [mm]: 272
- Brake Disc Type: solid
- Drilled: no
- Surface: Oiled
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Product line: PREMIER
- Brake Disc Thickness [mm]: 10
- Height [mm]: 48
- Centering Diameter [mm]: 65
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 9
- Weight [kg]: 6,2
- Tightening Torque [Nm]: 120
- Test Mark: R90 homologated
- Packing Type: Box
- Packaging length [cm]: 27,5
- Packaging width [cm]: 27,5
- Packaging height [cm]: 10,5
- Item number: DDF1895
- Manufacturer: FERODO
- EAN number: 4044197541324
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 312
- for PR number: 1LJ, 1LL, 1LV, 1ZA, 1ZB, 1ZD
- Brake Disc Type: Vented
- Drilled: no
- Machining: High-carbon
- Brake Disc Thickness [mm]: 25
- Height [mm]: 49,9
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Inner Diameter [mm]: 146
- No. of holes 2: 9
- Bore Diameter [mm]: 15,3
- Item number: 25833
- Manufacturer: MAPCO
- EAN number: 4043605415516
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 280
- for PR number: 1ZF
- Construction Year from: 05 / 2010
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Brake Disc Thickness [mm]: 22
- Height [mm]: 49,5
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 22
- Minimum thickness [mm]: 19
- Tightening Torque [Nm]: 120
- Colour: black
- Item number: C3S013ABE
- Manufacturer: ABE
- EAN number: 5900427201446
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 282
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Brake Disc Thickness [mm]: 12,0
- Height [mm]: 48,6
- Centering Diameter [mm]: 65
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 10
- Inner Diameter [mm]: 159
- Bore Diameter [mm]: 15,3
- fulfils ECE norm: ECE-R90
- Item number: C4W015ABE
- Manufacturer: ABE
- EAN number: 5900427206793
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- for PR number: 1KW
- Brake Disc Type: Vented
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48,5
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 20
- Test Mark: E1 90R-02C0289 / 1665
- Item number: BG3975
- Manufacturer: DELPHI
- EAN number: 5012759370155
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 280
- for PR number: 1ZF, 1ZM
- Brake Disc Type: internally vented
- Drilled: no
- Brake Disc Thickness [mm]: 22
- Height [mm]: 49,5
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Rim Hole Number: 5
- Item number: A1001V
- Manufacturer: LPR
- EAN number: 8032532104033
- Condition: New
- Fitting Position: Rear Axle
- Brake System: TRW
- for PR number: 1KD
- Drilled: no
- Brake Disc Thickness [mm]: 10
- Height [mm]: 51,3
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Item number: A1003P
- Manufacturer: LPR
- EAN number: 8032532092286
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 255
- Brake Disc Type: solid
- Drilled: no
- Brake Disc Thickness [mm]: 10
- Height [mm]: 51,6
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 8
- Inner Diameter [mm]: 65
- Bore Diameter [mm]: 15,3
- Item number: 25831
- Manufacturer: MAPCO
- EAN number: 4043605404640
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 280
- for PR number: 1ZF
- Brake Disc Type: Vented
- Drilled: no
- Brake Disc Thickness [mm]: 22
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Item number: 25832
- Manufacturer: MAPCO
- EAN number: 4043605415097
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 282
- Brake Disc Type: solid
- Drilled: no
- Brake Disc Thickness [mm]: 12
- Height [mm]: 48,6
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 10
- Inner Diameter [mm]: 159
- No. of holes 2: 9
- Bore Diameter [mm]: 15,3
- Item number: 25841
- Manufacturer: MAPCO
- EAN number: 4043605441874
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 312
- for PR number: 1LJ, 1ZA, 1LL, 1ZB
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Brake Disc Thickness [mm]: 25,0
- Height [mm]: 49,9
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Inner Diameter [mm]: 146
- No. of holes 2: 9
- Bore Diameter [mm]: 15,3
- Item number: C3W039ABE
- Manufacturer: ABE
- EAN number: 5901655214055
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 255
- Brake Disc Type: solid
- Drilled: no
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Brake Disc Thickness [mm]: 10
- Height [mm]: 51,3
- Centering Diameter [mm]: 65
- Number of Holes: 9
- Rim Hole Number: 9
- Thickness [mm]: 10
- Minimum thickness [mm]: 7
- Item number: C4W012ABE
- Manufacturer: ABE
- EAN number: 5900427206762
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 312
- for PR number: 1LJ, 1ZA
- Brake Disc Type: Vented
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness [mm]: 25
- Height [mm]: 49,9
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 22
- Test Mark: E1 90R-02C0277 / 1198
- Item number: BG3953
- Manufacturer: DELPHI
- EAN number: 5012759360545
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 345
- for PR number: 1ZK
- Brake Disc Type: Vented
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness [mm]: 30
- Height [mm]: 50
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 27
- Test Mark: E1 90R-02C0074 / 1612
- Item number: BG9952
- Manufacturer: DELPHI
- EAN number: 5012759360736
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 288
- for PR number: 1ZE
- Brake Disc Type: internally vented
- Drilled: no
- Brake Disc Thickness [mm]: 25
- Height [mm]: 49,5
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 22
- Item number: A1002V
- Manufacturer: LPR
- EAN number: 8032532092255
- Condition: New