Vehicle identification number: 0035054
Opel Signum CC 3.2 V6 Control, blending flap (211 hp Petrol Z 32 SE)
-
- Construction Year from: 06 / 2003
- Vehicle Equipment: for vehicles with automatic climate control
- Number of pins: 6
- Weight [kg]: 0,146
- Item number: 715288
- Our price: 70,49 €
- Manufacturer: VALEO
- EAN number: 3276427152883
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 06 / 2003
- Vehicle Equipment: for vehicles with air conditioning (manually controlled)
- Number of pins: 5
- Weight [kg]: 0,17
- Item number: 515126
- Our price: 57,49 €
- Manufacturer: VALEO
- EAN number: 3276425151260
- Condition: New
-
- Construction Year from: 06 / 2003
- Vehicle Equipment: for vehicles with automatic climate control
- Operating Mode: Electric
- Item number: V40-77-0030
- Our price: 109,99 €
- Manufacturer: VEMO
- EAN number: 4062375117727
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 06 / 2003
- Vehicle Equipment: for vehicles with air conditioning (manually controlled)
- Operating Mode: Electric
- Item number: V40-77-0029
- Our price: 209,00 €
- Manufacturer: VEMO
- EAN number: 4062375117710
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
- Fitting Position: Front Axle
- Diameter [mm]: 314
- Brake Disc Type: Vented
- Drilled: no
- Brake Disc Thickness [mm]: 28
- Height [mm]: 44,8
- Centering Diameter [mm]: 70
- Number of Holes: 7
- Bolt Hole Circle Ø [mm]: 110
- Minimum thickness [mm]: 25
- Thread Size: 15
- Item number: C3X035ABE
- Manufacturer: ABE
- EAN number: 5900427202269
- Condition: New
price incl. 19% VAT
- Fitting Position: Front Axle
- Diameter [mm]: 302,3
- Vehicle Identification Number (VIN) to: 31068238
- Brake Disc Type: internally vented
- Drilled: no
- Height [mm]: 45,2
- Centering Diameter [mm]: 70
- Number of Holes: 5
- Item number: O1002V
- Manufacturer: LPR
- EAN number: 8032532099063
- Condition: New
- Fitting Position: Rear Axle
- Brake Disc Type: solid
- Drilled: no
- Vehicle Equipment: for vehicles without sports package
- Brake Disc Thickness [mm]: 12
- Height [mm]: 41,5
- Centering Diameter [mm]: 65,5
- Number of Holes: 5
- Rim Hole Number: 5
- Minimum thickness [mm]: 10
- Item number: O1014P
- Manufacturer: LPR
- EAN number: 8032928001694
- Condition: New
price incl. 19% VAT
- Fitting Position: Rear Axle
- Diameter [mm]: 292
- Drilled: no
-
- Vehicle Equipment: for vehicles with sports package
- Special Purpose Vehicle: for police vehicles
- Height [mm]: 41,4
- Centering Diameter [mm]: 65,5
- Minimum thickness [mm]: 18
- Item number: O1016V
- Manufacturer: LPR
- EAN number: 8032928003032
- Condition: New
price incl. 19% VAT
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Height [mm]: 51,9
- Width [mm]: 123,0
- Test Mark: ECE R-90
- Brake Disc Thickness [mm]: 15,8
- Production Number: 6015105
- Item number: 6015105
- Our price: 21,49 €
- Manufacturer: KRAFT
- EAN number: 5900427194465
- Condition: New
- Fitting Position: Front Axle
- Vehicle Identification Number (VIN) from: 3106839
- Material: Low-Metallic
- Supplementary Article / Supplementary Info Info 2: with piston clip, with anti-squeak plate
- Quantity Unit: Axle Set
- Height 1 [mm]: 72,7
- Height 2 [mm]: 77,5
- Width 2 [mm]: 156,5
- Width 1 [mm]: 155,3
- Thickness 1 [mm]: 19,8
- Thickness 2 [mm]: 20,4
- WVA Number: 23404
- Test Mark: ECE-R90
- Article number of recommended accessories: 1987474241, 1987473017, 1987473039, 1987474968, 1987474408, 1987474585, 1987474337
- Observe technical data
- Item number: 0 986 494 280
- Our price: 34,99 €
- Manufacturer: BOSCH
- EAN number: 3165143684535
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 302
- Brake Disc Type: Vented
- Drilled: no
- Brake Disc Thickness [mm]: 28
- Height [mm]: 45
- Centering Diameter [mm]: 70
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110
- Minimum thickness [mm]: 25
- Item number: BDC5421
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438114324
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Brake System: ATE
- Wear Warning Contact: not prepared for wear warning indicator
- Material: Low-Metallic
- Thickness [mm]: 20,3
- Quantity Unit: Axle Set
- Number of wear indicators [per axle]: 2
- Height [mm]: 77,5
- Height 2 [mm]: 77,5
- Width [mm]: 156,5
- Width 2 [mm]: 155,1
- Thickness 2 [mm]: 20,4
- Number of pads: 4
- WVA Number: 23404
- Test Mark: ECE-R90
- Manufacturer Restriction: ATE
- Number of springs: 2
- Item number: C1X031ABE
- Our price: 28,49 €
- Manufacturer: ABE
- EAN number: 5900427191051
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 292
- Brake Disc Type: Vented
- Drilled: no
- Brake Disc Thickness [mm]: 20
- Height [mm]: 41,5
- Centering Diameter [mm]: 65,5
- Number of Holes: 7
- Bolt Hole Circle Ø [mm]: 110
- Minimum thickness [mm]: 18
- Thread Size: 14,2
- Item number: C4X018ABE
- Manufacturer: ABE
- EAN number: 5900427206977
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 278
- Brake Disc Type: solid
- Drilled: no
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Brake Disc Thickness [mm]: 12
- Height [mm]: 41,5
- Centering Diameter [mm]: 65
- Number of Holes: 7
- Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Item number: C4X019ABE
- Manufacturer: ABE
- EAN number: 5900427206984
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 314
- Brake Disc Type: Vented
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness [mm]: 28
- Height [mm]: 44,8
- Centering Diameter [mm]: 70
- Number of Holes: 5
- Minimum thickness [mm]: 25
- Test Mark: E1 90R-02C0289 / 1854
- Item number: BG3973
- Manufacturer: DELPHI
- EAN number: 5012759360712
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 314
- Vehicle Identification Number (VIN) from: 31068239
- Brake Disc Type: internally vented
- Drilled: no
- Brake Disc Thickness [mm]: 28
- Height [mm]: 45,2
- Centering Diameter [mm]: 70
- Number of Holes: 5
- Minimum thickness [mm]: 25
- Item number: O1008V
- Manufacturer: LPR
- EAN number: 8032928001724
- Condition: New
- Fitting Position: Front Axle
- Brake System: ATE
- Quantity Unit: Axle Set
- Height [mm]: 69,3
- Width [mm]: 155,1
- Test Mark: ECE R-90
- Brake Disc Thickness [mm]: 20,1
- Production Number: 6001720
- Item number: 6001720
- Our price: 25,99 €
- Manufacturer: KRAFT
- EAN number: 5900427191037
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 292
- Brake Disc Type: Vented
- Drilled: no
- Brake Disc Thickness [mm]: 20
- Height [mm]: 41,5
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110
- Minimum thickness [mm]: 18
- Item number: BDC5422
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438114270
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Brake System: ATE
- Vehicle Identification Number (VIN) to: 31068238
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Brake Caliper Type: for brake caliper with plastic piston
- Thickness [mm]: 20,1
- Quantity Unit: Axle Set
- Height 1 [mm]: 69,6
- Height 2 [mm]: 70,7
- Width 2 [mm]: 156,3
- Width 1 [mm]: 155,1
- Test Mark: E9 90R-02A1259 / 4467
- MAPP code available
- Article number of recommended accessories: 24.8190-0719.2, 24.8190-0720.2
- Observe dimensions
- Item number: 13.0460-7172.2
- Our price: 42,99 €
- Manufacturer: ATE
- EAN number: 4006633105095
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Brake System: ATE
- Vehicle Identification Number (VIN) to: 41096248 / 48091178
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 16,6
- Quantity Unit: Axle Set
- Height [mm]: 52,0
- Width [mm]: 123,0
- Test Mark: E9 90R-02A1258 / 4462
- MAPP code available
- Observe mounting information
- Item number: 13.0460-7194.2
- Our price: 31,49 €
- Manufacturer: ATE
- EAN number: 4006633127691
- Condition: New
Replaces brake pad with springs with retroactive effect. See item picture for further information.