Opel Zafira f75 1.6 LPG Clutch hose (103 hp Petrol/Liquified Petroleum Gas (LPG) Z 16 XEP)
- Transmission ID: F13, F17
- Transmission Type: Manual Transmission
- Left- / right-hand drive vehicles: for left-hand / right-hand drive vehicles
- Item number: 2070003
- Our price: 17,91 €
- Manufacturer: METZGER
- EAN number: 4062101079626
- Condition: New
- Transmission Type: Manual Transmission
- Left- / right-hand drive vehicles: for left-hand / right-hand drive vehicles
- Item number: 73596
- Our price: 14,33 €
- Manufacturer: AIC
- EAN number: 4046283735969
- Condition: New
Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use.
For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules.
If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at:
Phone: 040 - 25 30 66 55 Email: [email protected]
This often avoids extensive troubleshooting that is disproportionate to normal repair times.
The following applies to complaints: The more complete the processes are submitted, the faster they can be processed.
Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Transmission ID: F13, F17
- Transmission Type: Manual Transmission
- Left- / right-hand drive vehicles: for left-hand / right-hand drive vehicles
- Item number: OP980153
- Our price: 18,92 €
- Manufacturer: hajus Autoteile
- EAN number: 9801530000017
- Condition: New
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Fitting Position: Front Axle
- Height [mm]: 42
- Surface: Oiled
- Centering Diameter [mm]: 70
- Number of Holes: 5
- Minimum thickness [mm]: 22
- Test Mark: E1 90R-02C0957 / 2551
- Drilled: no
- Item number: BG3405
- Manufacturer: DELPHI
- EAN number: 5012759086506
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 264
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Fitting Position: Rear Axle
- Height [mm]: 42
- Surface: Oiled
- Centering Diameter [mm]: 65,5
- Number of Holes: 5
- Minimum thickness [mm]: 8
- Test Mark: E4 90R-02C0747 / 2816
- Drilled: no
- Item number: BG3406
- Manufacturer: DELPHI
- EAN number: 5012759086513
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Supplementary Info: ORIGINAL Quality
- Brake Disc Thickness [mm]: 24,8
- Fitting Position: Front Axle
- Height [mm]: 42
- Centering Diameter [mm]: 70
- Number of Holes: 5
- Wheel Bolt Bore Diameter [mm]: 14,2
- Bolt Hole Circle Ø [mm]: 110
- Minimum thickness [mm]: 22
- Required quantity: 2
- Drilled: no
- Item number: 615 521 6017
- Manufacturer: MEYLE
- EAN number: 4040074331767
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Quantity Unit: Axle Set
- Brake System: Bosch
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 16,5
- Fitting Position: Rear Axle
- Supplementary Article / Supplementary Info: with accessories
- Height [mm]: 42,7
- Width [mm]: 104,6
- Test Mark: E1 90R-01326 / 452
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Number of bolts / screws: 2
- Item number: 13.0460-3976.2
- Our price: 31,36 €
- Manufacturer: ATE
- EAN number: 4006633057660
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Braking / Drive Dynamics: for vehicles with ABS
- Fitting Position: Front Axle
- Vehicle Identification Number (VIN) to: 42187758
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: without integrated wear warning contact, with acoustic wear warning
- Height 1 [mm]: 71,4
- Height 2 [mm]: 78,5
- Width 2 [mm]: 156,3
- Width 1 [mm]: 155,1
- Thickness 1 [mm]: 20,2
- Thickness 2 [mm]: 19,6
- Test Mark: E1 90R-01795 / 608
- MAPP code available
- Article number of recommended accessories: 24.8190-0718.2
- Observe dimensions
- Item number: 13.0460-7116.2
- Our price: 36,37 €
- Manufacturer: ATE
- EAN number: 4006633069540
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Quantity Unit: Axle Set
- Brake System: Lucas / TRW
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 15,3
- Product line: Ceramic
- Fitting Position: Rear Axle
- Supplementary Article / Supplementary Info: with accessories
- Height [mm]: 42,8
- Width [mm]: 95,3
- Test Mark: E1 90R-02A0258 / 0226
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Number of bolts / screws: 4
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-2868.2
- Our price: 47,78 €
- Manufacturer: ATE
- EAN number: 4006633346429
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
-
- Fitting Position: Front Axle
- Vehicle Identification Number (VIN) from: 42187759
- Required quantity: 2
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: without integrated wear warning contact, with acoustic wear warning
- Product line: Ceramic
- Number of wear indicators [per axle]: 2
- Height 1 [mm]: 69,7
- Height 2 [mm]: 76,0
- Width 2 [mm]: 156,3
- Width 1 [mm]: 155,1
- Thickness 1 [mm]: 20,5
- Thickness 2 [mm]: 20,2
- Test Mark: E1 90R-02A0258 / 0225
- MAPP code available
- Article number of recommended accessories: 24.8190-0720.2, 24.8190-0018.2
- Observe dimensions
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-7179.2
- Our price: 65,24 €
- Manufacturer: ATE
- EAN number: 4006633346979
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
- Diameter [mm]: 264,0
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 9,8
- Fitting Position: Rear Axle
- Height [mm]: 42
- Surface: Coated
- Centering Diameter [mm]: 65,5
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110,0
- Minimum thickness [mm]: 8,0
- Inner Diameter [mm]: 145,0
- MAPP code available
- Test Mark: E1 90R-02C0165 / 0694
- Bore Diameter [mm]: 14,0
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0110-0250.1
- Manufacturer: ATE
- EAN number: 4006633029681
- Condition: New
- Diameter [mm]: 280,0
- Brake Disc Type: Vented
- Product line: PowerDisc
- Brake Disc Thickness [mm]: 24,8
- Fitting Position: Front Axle
- Height [mm]: 42
- Surface: Coated
- Centering Diameter [mm]: 70,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110,0
- Minimum thickness [mm]: 22,0
- Inner Diameter [mm]: 139,0
- Machining: Alloyed / High-carbon
- MAPP code available
- No. of holes 2: 7
- Test Mark: E1 90R-02C0858 / 1213
- Bore Diameter [mm]: 14,0
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0325-0131.1
- Manufacturer: ATE
- EAN number: 4006633094436
- Condition: New
For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
price incl. 19% VAT
excl. delivery costs
-
- Engine Code: Z 16 XE<Ecotec>
- Fitting Position: Front Axle
- Vehicle configuration line / variant: OPC
- Vehicle Identification Number (VIN) from: 42000001, 45000001, 46000001, 48000001, 4H000001
-
- Engine Code: Z 16 XE<Ecotec>
- Fitting Position: Front Axle
- not for vehicle configuration line / variant: OPC
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: with acoustic wear warning
- Material: Low-Metallic
- Height 1 [mm]: 71,6
- Height 2 [mm]: 78,5
- Width 2 [mm]: 156,4
- Width 1 [mm]: 155,1
- Thickness 1 [mm]: 19,3
- Thickness 2 [mm]: 20,1
- WVA Number: 23057
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with piston clip
- Article number of recommended accessories: 1987473018, 1987473033, 1987474973, 1987474587, 1987474241
- Observe technical data
- Item number: 0 986 424 457
- Our price: 23,90 €
- Manufacturer: BOSCH
- EAN number: 3165143210031
- Condition: New
- Quantity Unit: Axle Set
- Brake System: Lucas / TRW
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 15,3
- Fitting Position: Rear Axle
- Supplementary Article / Supplementary Info: with accessories
- Height [mm]: 42,8
- Width [mm]: 95,3
- Test Mark: E1 90R-02A0333 / 0253, E9 90R-02A1163 / 1231
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Number of bolts / screws: 4
- Item number: 13.0460-2868.2
- Our price: 34,08 €
- Manufacturer: ATE
- EAN number: 4006633104135
- Condition: New
-
- Braking / Drive Dynamics: for vehicles without ABS
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: without integrated wear warning contact, with acoustic wear warning
- Height 1 [mm]: 63,0
- Height 2 [mm]: 62,0
- Width 2 [mm]: 177,6
- Width 1 [mm]: 160,0
- Thickness 1 [mm]: 17,5
- Thickness 2 [mm]: 18,5
- Test Mark: E1 90R-02A0325 / 0210
- MAPP code available
- Article number of recommended accessories: 24.8190-0018.2, 24.8190-0718.2
- Observe dimensions
- Item number: 13.0460-7115.2
- Our price: 40,58 €
- Manufacturer: ATE
- EAN number: 4006633069533
- Condition: New
-
- Fitting Position: Front Axle
- Vehicle Identification Number (VIN) from: 42187759
- Required quantity: 2
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: without integrated wear warning contact, with acoustic wear warning
- Number of wear indicators [per axle]: 2
- Height 1 [mm]: 69,7
- Height 2 [mm]: 76,0
- Width 2 [mm]: 156,3
- Width 1 [mm]: 155,1
- Thickness 1 [mm]: 20,5
- Thickness 2 [mm]: 20,2
- Test Mark: E1 90R-02A0335 / 0224, E9 90R-02A1162 / 0788
- MAPP code available
- Article number of recommended accessories: 24.8190-0720.2, 24.8190-0018.2
- Observe dimensions
- Item number: 13.0460-7179.2
- Our price: 48,37 €
- Manufacturer: ATE
- EAN number: 4006633117913
- Condition: New
-
- Braking / Drive Dynamics: for vehicles without ABS
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: without integrated wear warning contact, with acoustic wear warning
- Product line: Ceramic
- Height 1 [mm]: 63,0
- Height 2 [mm]: 62,0
- Width 2 [mm]: 177,6
- Width 1 [mm]: 160,0
- Thickness 1 [mm]: 17,5
- Thickness 2 [mm]: 18,5
- Test Mark: E1 90R-02A0258 / 0252
- MAPP code available
- Article number of recommended accessories: 24.8190-0718.2
- Observe dimensions
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-7115.2
- Our price: 51,88 €
- Manufacturer: ATE
- EAN number: 4006633130783
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
-
- Braking / Drive Dynamics: for vehicles with ABS
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: without integrated wear warning contact, with acoustic wear warning
- Product line: Ceramic
- Height 1 [mm]: 71,4
- Height 2 [mm]: 78,5
- Width 2 [mm]: 156,3
- Width 1 [mm]: 155,1
- Thickness 1 [mm]: 20,2
- Thickness 2 [mm]: 19,6
- Test Mark: E1 90R-011403 / 1338
- MAPP code available
- Article number of recommended accessories: 24.8190-0718.2
- Observe dimensions
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-7116.2
- Our price: 47,94 €
- Manufacturer: ATE
- EAN number: 4006633346832
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 280,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 24,8
- Fitting Position: Front Axle
- Height [mm]: 42
- Surface: Coated
- Centering Diameter [mm]: 70,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110,0
- Minimum thickness [mm]: 22,0
- Inner Diameter [mm]: 139,0
- Machining: Alloyed / High-carbon
- MAPP code available
- No. of holes 2: 7
- Test Mark: E1 90R-02C0115 / 0415
- Bore Diameter [mm]: 14,0
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0125-0131.1
- Manufacturer: ATE
- EAN number: 4006633033244
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Engine Code: Z 16 XE<Ecotec>
- Fitting Position: Front Axle
- Vehicle configuration line / variant: OPC
- Vehicle Identification Number (VIN) to: 32999999, 35999999, 36999999, 38999999, 3H999999
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: with integrated wear sensor, with acoustic wear warning
- Material: Low-Metallic
- Height [mm]: 74,2
- Width 2 [mm]: 156,4
- Width 1 [mm]: 155,4
- Thickness 1 [mm]: 19,5
- Thickness 2 [mm]: 20,3
- WVA Number: 23116
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate, with piston clip
- Article number of recommended accessories: 1987473018, 1987474973, 1987474587, 1987474241
- Observe technical data
- Item number: 0 986 424 488
- Our price: 30,73 €
- Manufacturer: BOSCH
- EAN number: 3165143660478
- Condition: New