• SHOP
  • CLUB
0
My Garage
Add vehicle
0
items #
0,00 €
Your basket is empty

VW Polo 6N2 1.9 SDI Clutch plate (64 hp Diesel ASX)

Clutch disc VW Polo 6N2 1.9 SDI 64 Diesel

Recommended part replacement interval for your car for the part category Clutch plate: every 100.000 km

4 items
SACHS 1878 075 141 Clutch Disc 190mm, Number of Teeth: 24
Article number: 1878 075 141
Submit a review
  • Parameter: 190VTP
  • Diameter [mm]: 190
  • Hub Profile: 18,2x20,4-24N
  • Number of Teeth: 24
  • Item number: 1878 075 141
  • Our price: 88,99 €
  • Manufacturer: SACHS
  • EAN number: 4013872362530
  • Condition: New
Show OEM numbers of the product
Details
Сurrently out of stock
-41%
compared to RRP 151,00 €

88,99 €

price incl. 19% VAT

excl. delivery costs

  • Number of Teeth: 24
  • Hub Profile: 18,3x20,4-24N
  • Parameter: 180B
  • Diameter [mm]: 180
  • Clutch Type: Rigid clutch disc with organic surfaces
  • Product line: Performance
  • Item number: 881864 99D088
  • Our price: 151,99 €
  • Manufacturer: SACHS PERFORMANCE
  • EAN number: 4050451001831
  • Condition: New
Show OEM numbers of the product
Additional information

A reinforced clutch cover has fundamental advantages against Performance clutch disc differences to OE: higher Rigid disk with organic linings an OE clutch cover, such as a higher transmittable torque transmittable torque, higher burst number of revolutions, and higher resistance against thrust. It also allows for start performance similar to OE, effortless exchange with OE clutches. faster and sportier gearshifts. That makes it extremely Typical applications include: application field of dual mass useful for street tuning, endurance races, hill climbing (group N) and for vehicles that are often driven with their flywheels, chip tuning, turbocharger and supercharger maximum gross vehicle weight (construction-site vehicles, modifications, towing trailers, commercial vehicle, ambulances, courier services such as UPS, TNT; DHL, etc.). snowremoval vehicle, passenger car: emergency service, Both rigid and torsion damper clutch discs are available. driving school, taxi, vehicles with maximum gross vehicle Clutch discs with torsion springs function as a vibration weight and according to high load (construction-site damper between engine and gearbox. vehicles, towing service, campers, ambulance cars, etc.), 1/4 mile-race, race circuit (endurance race, clubsport, Due to reinforced clutch components the pedal force can autocross), hill climbing (e.g. group N), rally, slalom, increase and the modulation range can be reduced. Additional clutch and gear noises can appear. drift racing

Details
Free delivery on this item
Сurrently out of stock
151,99 €

price incl. 19% VAT

free delivery

  • Number of Teeth: 24
  • Hub Profile: 18,3x20,4-24N
  • Parameter: 184S
  • Diameter [mm]: 184
  • Clutch Type: rigid sintered disc
  • Product line: Performance
  • Item number: 881864 99D087
  • Our price: 153,99 €
  • Manufacturer: SACHS PERFORMANCE
  • EAN number: 4050451001848
  • Condition: New
Show OEM numbers of the product
Additional information

A reinforced clutch cover has fundamental advantages against Performance clutch disc differences to OE: higher thermal Rigid, sintered disk an OE clutch cover, such as a higher transmittable torque capacity compared to organic friction material, higher and higher resistance against thrust. It also allows for transmittable torque compared to organic friction material, faster and sportier gearshifts. That makes it extremely very dirt resistant, aggressive start performance, effortless exchange with OE clutches. useful for street tuning, endurance races, hill climbing (group N) and for vehicles that are often driven with their Typical applications include: race circuit (endurance race, clubsport, autocross), hill climbing (e.g. group N), rally, maximum gross vehicle weight (construction-site vehicles, ambulances, courier services such as UPS, TNT; DHL, etc.). slalom, drift racing, 1/4 mile-race Both rigid and torsion damper clutch discs are available. Clutch discs with torsion springs function as a vibration damper between engine and gearbox. Due to reinforced clutch components the pedal force can increase and the modulation range can be reduced. Additional clutch and gear noises can appear.

Details
Free delivery on this item
Сurrently out of stock
153,99 €

price incl. 19% VAT

free delivery

881864 002244 Clutch disc Volkswagen POLO 1.9SDI 64 hp 47 kW ASX 1999 6N2 Sample photo only SACHS PERFORMANCE Performance 881864002244 Clutch disc Polo 6N2 1.9 SDI 64 hp Diesel 2001 price
  • Number of Teeth: 24
  • Hub Profile: 18,3x20,4-24N
  • Parameter: 184S
  • Diameter [mm]: 184
  • Clutch Type: rigid sintered disc
  • Product line: Performance
  • Item number: 881864 002244
  • Our price: 250,00 €
  • Manufacturer: SACHS PERFORMANCE
  • EAN number: 4050451011335
  • Condition: New
Show OEM numbers of the product
Additional information

A reinforced clutch cover has fundamental advantages against Performance clutch disc differences to OE: higher thermal Rigid, sintered disk an OE clutch cover, such as a higher transmittable torque capacity compared to organic friction material, higher and higher resistance against thrust. It also allows for transmittable torque compared to organic friction material, faster and sportier gearshifts. That makes it extremely very dirt resistant, aggressive start performance, effortless exchange with OE clutches. useful for street tuning, endurance races, hill climbing (group N) and for vehicles that are often driven with their Typical applications include: race circuit (endurance race, clubsport, autocross), hill climbing (e.g. group N), rally, maximum gross vehicle weight (construction-site vehicles, ambulances, courier services such as UPS, TNT; DHL, etc.). slalom, drift racing, 1/4 mile-race Both rigid and torsion damper clutch discs are available. Clutch discs with torsion springs function as a vibration damper between engine and gearbox. Due to reinforced clutch components the pedal force can increase and the modulation range can be reduced. Additional clutch and gear noises can appear.

Details
Free delivery on this item
Сurrently out of stock
250,00 €

price incl. 19% VAT

free delivery

VW POLO (6N2) 1.9 SDI Bestsellers
  • Fitting Position: Front Axle
  • Diameter [mm]: 239
  • Brake Disc Type: Vented
  • Drilled: no
  • Surface: Oiled
  • Brake Disc Thickness [mm]: 20
  • Height [mm]: 39
  • Centering Diameter [mm]: 65
  • Number of Holes: 4
  • Minimum thickness [mm]: 18
  • Test Mark: E1 90R-02C0957 / 2559
  • Item number: BG2109
  • Manufacturer: DELPHI
  • EAN number: 5012759421086
  • Condition: New
Show OEM numbers of the product
Details
In stock (Item(s) left: 6)
-63%
compared to RRP 61,18 €

22,99 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Front Axle
  • Diameter [mm]: 239
  • Brake Disc Type: Vented
  • Drilled: no
  • Brake Disc Thickness [mm]: 18
  • Height [mm]: 34,2
  • Centering Diameter [mm]: 65
  • Number of Holes: 4
  • Bolt Hole Circle Ø [mm]: 100
  • Minimum thickness [mm]: 16
  • Item number: BDC4548
  • Manufacturer: QUINTON HAZELL
  • EAN number: 5016593351943
  • Condition: New
Show OEM numbers of the product
Details
In stock
-45%
compared to RRP 81,52 €

44,49 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Front Axle
  • Brake System: Volkswagen
  • Vehicle Identification Number (VIN) from: 6N-TY140001, 6N-TW082001
  • Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
  • Thickness [mm]: 17,2
  • Quantity Unit: Axle Set
  • Height 1 [mm]: 51,2
  • Height 2 [mm]: 50,6
  • Width [mm]: 141,8
  • Test Mark: E9 90R-02A1251 / 4412
  • MAPP code available
  • Item number: 13.0460-7100.2
  • Our price: 29,99 €
  • Manufacturer: ATE
  • EAN number: 4006633281409
  • Condition: New
Show OEM numbers of the product
Details
In stock
-66%
compared to RRP 89,13 €

29,99 €

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Front Axle
  • Diameter [mm]: 239
  • Vehicle Identification Number (VIN) from: 6N-SY087411, 6N-SW008501
  • Brake Disc Type: Vented
  • Drilled: no
  • Surface: Coated
  • Machining: High-carbon
  • Supplementary Article / Supplementary Info Info 2: with bolts / screws
  • Brake Disc Thickness [mm]: 18,0
  • Height [mm]: 34,5
  • Centering Diameter [mm]: 65,0
  • Number of Holes: 4
  • Bolt Hole Circle Ø [mm]: 100,0
  • Minimum thickness [mm]: 16,0
  • Inner Diameter [mm]: 125,0
  • MAPP code available
  • Test Mark: E1 90R-02C0118 / 0079
  • Bore Diameter [mm]: 13,6
  • Item number: 24.0118-0106.1
  • Manufacturer: ATE
  • EAN number: 4006633269964
  • Condition: New
Show OEM numbers of the product
Details
In stock
-62%
compared to RRP 85,32 €

32,49 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Front Axle
  • Diameter [mm]: 239
  • Vehicle Identification Number (VIN) from: 6N-SY087411, 6N-SW008501
  • Brake Disc Type: Vented
  • Drilled: no
  • Surface: Coated
  • Machining: High-carbon
  • Supplementary Article / Supplementary Info Info 2: with bolts / screws
  • Product line: PowerDisc
  • Brake Disc Thickness [mm]: 18,0
  • Height [mm]: 34,5
  • Centering Diameter [mm]: 65,0
  • Number of Holes: 4
  • Bolt Hole Circle Ø [mm]: 100,0
  • Minimum thickness [mm]: 16,0
  • Inner Diameter [mm]: 125,0
  • MAPP code available
  • Bore Diameter [mm]: 13,6
  • Item number: 24.0318-0106.1
  • Manufacturer: ATE
  • EAN number: 4006633276856
  • Condition: New
Show OEM numbers of the product
Additional information

For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.

Details
In stock (Item(s) left: 4)
-60%
compared to RRP 104,36 €

41,49 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Front Axle
  • Diameter [mm]: 256
  • for PR number: 1ZE, 1ZK, 1ZJ
  • Brake Disc Type: Vented
  • Drilled: no
  • Surface: Coated
  • Machining: Alloyed / High-carbon
  • Supplementary Article / Supplementary Info Info 2: with bolts / screws
  • Brake Disc Thickness [mm]: 20
  • Height [mm]: 38,7
  • Centering Diameter [mm]: 65
  • Number of Holes: 4
  • Bolt Hole Circle Ø [mm]: 100
  • Minimum thickness [mm]: 18
  • fulfils ECE norm: ECE-R90
  • Bore Diameter up to [mm]: 13,6
  • Item number: 0 986 478 308
  • Manufacturer: BOSCH
  • EAN number: 3165141234893
  • Condition: New
Show OEM numbers of the product
Details
In stock
-69%
compared to RRP 99,36 €

30,49 €
Price per item

price incl. 19% VAT

excl. delivery costs

ABE C3W015ABE Brake disc Front Axle, 239x18mm, 4, Vented
Article number: C3W015ABE
Submit a review
  • Fitting Position: Front Axle
  • Diameter [mm]: 239
  • Brake Disc Type: Vented
  • Drilled: no
  • Machining: High-carbon
  • Supplementary Article / Supplementary Info Info 2: with bolts / screws
  • Brake Disc Thickness [mm]: 18
  • Height [mm]: 34,1
  • Centering Diameter [mm]: 65
  • Number of Holes: 4
  • Thickness [mm]: 18
  • Minimum thickness [mm]: 16
  • Wear Warning Contact: incl. wear warning contact
  • Item number: C3W015ABE
  • Manufacturer: ABE
  • EAN number: 5900427201767
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
30,49 €
Price per item

price incl. 19% VAT

free delivery

  • Fitting Position: Front Axle
  • Diameter [mm]: 239
  • Brake Disc Type: Vented
  • Drilled: no
  • Surface: Oiled
  • Brake Disc Thickness [mm]: 18
  • Height [mm]: 34,5
  • Centering Diameter [mm]: 65
  • Number of Holes: 4
  • Minimum thickness [mm]: 16
  • Test Mark: E1 90R-02C0289 / 1701
  • Item number: BG2982
  • Manufacturer: DELPHI
  • EAN number: 5012759960066
  • Condition: New
Show OEM numbers of the product
Details
In stock
-70%
compared to RRP 78,65 €

23,49 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Front Axle
  • Diameter [mm]: 239
  • Brake System: ATE
  • Vehicle Identification Number (VIN) from: 6N-SW008501, 6N-SY087411
  • Brake Disc Type: internally vented
  • Drilled: no
  • Brake Disc Thickness [mm]: 18
  • Height [mm]: 34
  • Centering Diameter [mm]: 65
  • Number of Holes: 4
  • Minimum thickness [mm]: 16
  • Item number: V2291V
  • Manufacturer: LPR
  • EAN number: 8032532076385
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock (Item(s) left: 6)
90,49 €
Price per item

price incl. 19% VAT

free delivery

  • Fitting Position: Front Axle
  • Brake System: Volkswagen
  • Vehicle Identification Number (VIN) to: 6N-TY140000, 6N-TW082000
  • Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
  • Supplementary Article / Supplementary Info: with accessories
  • Thickness [mm]: 17,3
  • Quantity Unit: Axle Set
  • Height 1 [mm]: 48,9
  • Height 2 [mm]: 51,3
  • Width [mm]: 137,8
  • Test Mark: E9 90R-02A1251 / 4447
  • MAPP code available
  • Article number of recommended accessories: 13.0460-0184.2
  • Observe dimensions
  • Item number: 13.0460-7059.2
  • Our price: 21,49 €
  • Manufacturer: ATE
  • EAN number: 4006633141406
  • Condition: New
Show OEM numbers of the product
Details
In stock
-55%
compared to RRP 47,84 €

21,49 €

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Front Axle
  • Diameter [mm]: 239
  • Vehicle Identification Number (VIN) to: 6N-SY087410, 6N-SW008500
  • Brake Disc Type: solid
  • Drilled: no
  • Surface: Coated
  • Supplementary Article / Supplementary Info Info 2: with bolts / screws
  • Brake Disc Thickness [mm]: 9,9
  • Height [mm]: 33,6
  • Centering Diameter [mm]: 65,0
  • Number of Holes: 4
  • Bolt Hole Circle Ø [mm]: 100,0
  • Minimum thickness [mm]: 8,0
  • Inner Diameter [mm]: 125,0
  • Test Mark: E1 90R-02C0165 / 1150
  • Bore Diameter [mm]: 13,8
  • Item number: 24.0110-0232.1
  • Manufacturer: ATE
  • EAN number: 4006633070669
  • Condition: New
Show OEM numbers of the product
Details
In stock (Item(s) left: 2)
-54%
compared to RRP 51,17 €

23,99 €
Price per item

price incl. 19% VAT

excl. delivery costs

BOSCH 0 986 461 769 Brake pad set Rear Axle, Low-Metallic
Article number: 0 986 461 769
Reviews - 22
  • Fitting Position: Rear Axle
  • Brake System: Lucas-Girling
  • for PR number: 1KQ, 1KF, 1KE, 2EJ, 2EK
  • Material: Low-Metallic
  • Supplementary Article / Supplementary Info Info 2: with mounting manual, with anti-squeak plate, with bolts / screws
  • Thickness [mm]: 16,3
  • Quantity Unit: Axle Set
  • Height [mm]: 53,2
  • Width [mm]: 87,2
  • WVA Number: 20960
  • Test Mark: ECE-R90
  • Article number of recommended accessories: 1987473595, 1987474253, 1987474264, 1987474304, 1987474747, 1987474314, 1987474435, 1987474470, 1987474629, 1987474312
  • Number of bolts / screws: 4
  • Observe technical data
  • Item number: 0 986 461 769
  • Our price: 16,99 €
  • Manufacturer: BOSCH
  • EAN number: 3165143660010
  • Condition: New
Show OEM numbers of the product
Details
In stock
16,99 €

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Rear Axle
  • Diameter [mm]: 232
  • for PR number: 1KE, 1KQ, 1KF, 2EK, 2EJ
  • Brake Disc Type: solid
  • Drilled: no
  • Surface: Oiled
  • Brake Disc Thickness [mm]: 8,8
  • Height [mm]: 39,2
  • Centering Diameter [mm]: 65,1
  • Number of Holes: 4
  • Bolt Hole Circle Ø [mm]: 100
  • Minimum thickness [mm]: 7
  • fulfils ECE norm: ECE-R90
  • Bore Diameter up to [mm]: 13,9
  • Item number: 0 986 478 492
  • Manufacturer: BOSCH
  • EAN number: 4047024094482
  • Condition: New
Show OEM numbers of the product
Details
In stock
-67%
compared to RRP 61,17 €

20,49 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Front Axle
  • Diameter [mm]: 239
  • for PR number: 1LB, 1LM, 1ZC, 1ZN
  • Brake Disc Type: Vented, internally vented
  • Drilled: no
  • Surface: Coated
  • Brake Disc Thickness [mm]: 18
  • Height [mm]: 34,2
  • Centering Diameter [mm]: 65
  • Number of Holes: 4
  • Bolt Hole Circle Ø [mm]: 100
  • Minimum thickness [mm]: 16
  • fulfils ECE norm: ECE-R90
  • Bore Diameter up to [mm]: 14
  • Item number: 0 986 478 621
  • Manufacturer: BOSCH
  • EAN number: 4047024095397
  • Condition: New
Show OEM numbers of the product
Details
In stock
-73%
compared to RRP 91,63 €

24,99 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Front Axle
  • Diameter [mm]: 256
  • for PR number: 1LW, 1LX
  • Brake Disc Type: Vented, internally vented
  • Drilled: no
  • Surface: Oiled
  • Brake Disc Thickness [mm]: 25
  • Height [mm]: 39,2
  • Centering Diameter [mm]: 65
  • Number of Holes: 4
  • Bolt Hole Circle Ø [mm]: 100
  • Minimum thickness [mm]: 23
  • fulfils ECE norm: ECE-R90
  • Bore Diameter up to [mm]: 13,7
  • Item number: 0 986 479 054
  • Manufacturer: BOSCH
  • EAN number: 4047024241299
  • Condition: New
Show OEM numbers of the product
Details
In stock (Item(s) left: 4)
-59%
compared to RRP 106,39 €

42,99 €
Price per item

price incl. 19% VAT

excl. delivery costs

BOSCH 0 986 494 005 Brake pad set Front Axle, Low-Metallic
Article number: 0 986 494 005
Reviews - 29
  • Fitting Position: Front Axle
  • Brake System: ATE
  • for PR number: 1LB, 1LM, 1ZC, 1ZN
  • Material: Low-Metallic
  • Supplementary Article / Supplementary Info Info 2: with anti-squeak plate, with mounting manual
  • Thickness [mm]: 16,1
  • Quantity Unit: Axle Set
  • Height 1 [mm]: 51,2
  • Height 2 [mm]: 50,6
  • Width [mm]: 141,8
  • WVA Number: 21866
  • Test Mark: ECE-R90
  • Article number of recommended accessories: 1987474137, 1987474432, 1987474402, 1987474315
  • Observe technical data
  • Item number: 0 986 494 005
  • Our price: 21,49 €
  • Manufacturer: BOSCH
  • EAN number: 4047024045392
  • Condition: New
Show OEM numbers of the product
Details
In stock
-73%
compared to RRP 79,97 €

21,49 €

price incl. 19% VAT

excl. delivery costs

Find the best offers on