VAUXHALL Meriva Mk1 (A) (X03) 1.6 Turbo Clutch plate (180 hp Petrol Z 16 LET)
Recommended part replacement interval for your car for the part category Clutch plate: every 100.000 km
- Diameter [mm]: 215
- Number of Teeth: 20
- Observe service information
- Item number: ADW193125
- Our price: 57,99 €
- Manufacturer: BLUE PRINT
- EAN number: 5057746162047
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Parameter: 215HTD
- Diameter [mm]: 215
- Hub Profile: 20,1x22,6-20N
- Number of Teeth: 20
- Item number: 1878 003 309
- Our price: 85,99 €
- Manufacturer: SACHS
- EAN number: 4013872553266
- Condition: New
-
- Transmission Type: 6-Speed Manual Transmission
- Transmission Code: M32
- Diameter [mm]: 215
- Number of Teeth: 20
- Technical Information Number: TDFA
- Item number: 322 0370 10
- Our price: 155,99 €
- Manufacturer: LuK
- EAN number: 4005108498410
- Condition: New
- Parameter: 215
- Diameter [mm]: 215
- Hub Profile: 20,1x22,6-20N
- Number of Teeth: 20
- Clutch Type: Rigid clutch disc with organic surfaces
- Item number: 881864 001683
- Our price: 284,00 €
- Manufacturer: SACHS PERFORMANCE
- EAN number: 4050451003934
- Condition: New
Performance clutch disc differences to OE: higher Rigid disk with organic linings transmittable torque, higher burst number of revolutions, start performance similar to OE, effortless exchange with OE clutches. Typical applications include: application field of dual mass flywheels, chip tuning, turbocharger and supercharger modifications, towing trailers, commercial vehicle, snowremoval vehicle, passenger car: emergency service, driving school, taxi, vehicles with maximum gross vehicle weight and according to high load (construction-site vehicles, towing service, campers, ambulance cars, etc.), 1/4 mile-race, race circuit (endurance race, clubsport, autocross), hill climbing (e.g. group N), rally, slalom, drift racing
- Fitting Position: Front Axle
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness [mm]: 25
- Height [mm]: 42
- Centering Diameter [mm]: 70
- Number of Holes: 5
- Minimum thickness [mm]: 22
- Test Mark: E1 90R-02C0957 / 2551
- Item number: BG3405
- Manufacturer: DELPHI
- EAN number: 5012759086506
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 260
- Brake Disc Type: Vented
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness [mm]: 24
- Height [mm]: 41,1
- Centering Diameter [mm]: 60,1
- Number of Holes: 4
- Minimum thickness [mm]: 21
- Test Mark: E1 90R-02C0277 / 1910
- Item number: BG3569
- Manufacturer: DELPHI
- EAN number: 5012759174234
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness [mm]: 25
- Height [mm]: 43,2
- Centering Diameter [mm]: 60
- Number of Holes: 4
- Minimum thickness [mm]: 22
- Test Mark: E1 90R-02C0957 / 2551
- Item number: BG3989
- Manufacturer: DELPHI
- EAN number: 5012759370292
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 264
- Construction Year to: 05 / 2010
- Brake Disc Type: solid
- Drilled: no
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 65,5
- Number of Holes: 5
- Minimum thickness [mm]: 8
- Item number: O1431P
- Manufacturer: LPR
- EAN number: 8032532073858
- Condition: New
- Fitting Position: Rear Axle
- Brake System: Lucas / TRW
- Construction Year to: 05 / 2010
- Wear Warning Contact: with acoustic wear warning
- Supplementary Article / Supplementary Info: with accessories
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Thickness [mm]: 15,3
- Product line: Ceramic
- Quantity Unit: Axle Set
- Height [mm]: 42,8
- Width [mm]: 95,3
- Test Mark: E1 90R-02A0258 / 0226
- MAPP code available
- Number of bolts / screws: 4
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-2868.2
- Our price: 45,49 €
- Manufacturer: ATE
- EAN number: 4006633346429
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
- Fitting Position: Front Axle
- Brake System: ATE
- Construction Year to: 05 / 2010
- Wear Warning Contact: without integrated wear warning contact, with acoustic wear warning
- Product line: Ceramic
- Quantity Unit: Axle Set
- Number of wear indicators [per axle]: 2
- Height 1 [mm]: 69,7
- Height 2 [mm]: 76,0
- Width 2 [mm]: 156,3
- Width 1 [mm]: 155,1
- Thickness 1 [mm]: 20,5
- Thickness 2 [mm]: 20,2
- Test Mark: E1 90R-02A0258 / 0225
- MAPP code available
- Article number of recommended accessories: 24.8190-0720.2, 24.8190-0018.2
- Observe dimensions
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-7179.2
- Our price: 61,99 €
- Manufacturer: ATE
- EAN number: 4006633346979
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
- Fitting Position: Rear Axle
- Diameter [mm]: 264,0
- Construction Year to: 05 / 2010
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Rim Hole Number: 5
- Brake Disc Thickness [mm]: 9,8
- Height [mm]: 42
- Centering Diameter [mm]: 65,5
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110,0
- Minimum thickness [mm]: 8,0
- Inner Diameter [mm]: 145,0
- MAPP code available
- Test Mark: E1 90R-02C0165 / 0694
- Bore Diameter [mm]: 14,0
- Item number: 24.0110-0250.1
- Manufacturer: ATE
- EAN number: 4006633029681
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 308,0
- Construction Year to: 05 / 2010
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Machining: Alloyed / High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Product line: PowerDisc
- Brake Disc Thickness [mm]: 25,0
- Height [mm]: 42
- Centering Diameter [mm]: 70,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110,0
- Minimum thickness [mm]: 23,0
- Inner Diameter [mm]: 139,0
- MAPP code available
- No. of holes 2: 8
- Test Mark: E1 90R-02C0858 / 1214
- Bore Diameter [mm]: 14,0
- Item number: 24.0325-0142.1
- Manufacturer: ATE
- EAN number: 4006633312653
- Condition: New
For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
price incl. 19% VAT
- Fitting Position: Rear Axle
- Diameter [mm]: 264
- Brake Disc Type: solid
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness [mm]: 10
- Height [mm]: 42
- Centering Diameter [mm]: 65,5
- Number of Holes: 5
- Minimum thickness [mm]: 8
- Test Mark: E4 90R-02C0747 / 2816
- Item number: BG3406
- Manufacturer: DELPHI
- EAN number: 5012759086513
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 264
- Brake Disc Type: solid
- Drilled: no
- Brake Disc Thickness [mm]: 10
- Height [mm]: 43
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 8
- Item number: BDC4816
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593604902
- Condition: New
price incl. 19% VAT
- Fitting Position: Front Axle
- Diameter [mm]: 308
- Brake System: Ate
- Brake Disc Type: Vented
- Drilled: no
- Brake Disc Thickness [mm]: 25
- Height [mm]: 42
- Centering Diameter [mm]: 70
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110
- Minimum thickness [mm]: 22
- Item number: BDC5276
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593847811
- Condition: New
price incl. 19% VAT
- Fitting Position: Rear Axle
- Brake System: Lucas / TRW
- Construction Year to: 05 / 2010
- Wear Warning Contact: with acoustic wear warning
- Supplementary Article / Supplementary Info: with accessories
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Thickness [mm]: 15,3
- Quantity Unit: Axle Set
- Height [mm]: 42,8
- Width [mm]: 95,3
- Test Mark: E1 90R-02A0333 / 0253, E9 90R-02A1163 / 1231
- MAPP code available
- Number of bolts / screws: 4
- Item number: 13.0460-2868.2
- Our price: 33,49 €
- Manufacturer: ATE
- EAN number: 4006633104135
- Condition: New
- Fitting Position: Front Axle
- Brake System: ATE
- Construction Year to: 05 / 2010
- Wear Warning Contact: without integrated wear warning contact, with acoustic wear warning
- Quantity Unit: Axle Set
- Number of wear indicators [per axle]: 2
- Height 1 [mm]: 69,7
- Height 2 [mm]: 76,0
- Width 2 [mm]: 156,3
- Width 1 [mm]: 155,1
- Thickness 1 [mm]: 20,5
- Thickness 2 [mm]: 20,2
- Test Mark: E1 90R-02A0335 / 0224, E9 90R-02A1162 / 0788
- MAPP code available
- Article number of recommended accessories: 24.8190-0720.2, 24.8190-0018.2
- Observe dimensions
- Item number: 13.0460-7179.2
- Our price: 47,99 €
- Manufacturer: ATE
- EAN number: 4006633117913
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 308,0
- Construction Year to: 05 / 2010
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Machining: Alloyed / High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Brake Disc Thickness [mm]: 25,0
- Height [mm]: 42
- Centering Diameter [mm]: 70,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110,0
- Minimum thickness [mm]: 22,0
- Inner Diameter [mm]: 139,0
- MAPP code available
- No. of holes 2: 8
- Test Mark: E1 90R-02C0118 / 1163
- Bore Diameter [mm]: 14,0
- Item number: 24.0125-0142.1
- Manufacturer: ATE
- EAN number: 4006633109857
- Condition: New
price incl. 19% VAT
- Fitting Position: Rear Axle
- Brake System: Lucas-Girling
- Construction Year to: 03 / 2010
- Wear Warning Contact: with acoustic wear warning
- Material: Low-Metallic
- Supplementary Article / Supplementary Info Info 2: with mounting manual, with anti-squeak plate, with bolts / screws
- Thickness [mm]: 14
- Quantity Unit: Axle Set
- Height [mm]: 42,7
- Width [mm]: 95,4
- WVA Number: 23416
- Test Mark: ECE-R90
- Article number of recommended accessories: 1987474316
- Number of bolts / screws: 4
- Observe technical data
- Item number: 0 986 424 646
- Our price: 22,99 €
- Manufacturer: BOSCH
- EAN number: 3165143437155
- Condition: New
- Fitting Position: Front Axle
- Brake System: ATE
- Construction Year to: 03 / 2010
- Wear Warning Contact: with acoustic wear warning
- Material: Low-Metallic
- Supplementary Article / Supplementary Info Info 2: with mounting manual
- Thickness [mm]: 19,3
- Quantity Unit: Axle Set
- Height [mm]: 69,7
- Height 2 [mm]: 76
- Width 2 [mm]: 156,4
- Width 1 [mm]: 155,4
- WVA Number: 23844
- Test Mark: ECE-R90
- Article number of recommended accessories: 1987473018, 1987473033, 1987474098, 1987474179, 1987474973, 1987474312, 1987474382, 1987474480, 1987474587, 1987474241
- Observe technical data
- Item number: 0 986 424 707
- Our price: 25,99 €
- Manufacturer: BOSCH
- EAN number: 3165143659915
- Condition: New